QCY MeloBuds Pro

Contents

QCY MeloBuds Pro ANC Wireless Bluetooth Earphones User Manual

Model: MeloBuds Pro

Introduction

Thank you for choosing QCY MeloBuds Pro ANC Wireless Bluetooth Earphones. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your earphones. To enhance your experience, please download the QCY mobile APP client for more convenient control features.

Note: The images in this manual are for illustrative purposes only and may differ from the actual product. Please refer to the actual product.

Product Overview

Familiarize yourself with the components of your QCY MeloBuds Pro earphones and charging case.

QCY MeloBuds Pro Earphones and Charging Case

QCY MeloBuds Pro Earphones and Charging Case

Earbud Components

  • Sound Hole: For audio output.
  • LED Indicator: Displays status (pairing, charging).
  • Touch Panel: For touch controls.
  • Mic Hole: For voice input during calls and voice assistant.
  • Charging Contacts: For charging the earbuds in the case.

Charging Case Components

  • Charging Case Button: For pairing and factory reset.
  • Type-C Charging Port: For charging the case.
  • LED Indicator: Displays charging status and battery level of the case.

Setup and Initial Use

Initial Pairing

  1. Take out both earbuds from the charging case.
  2. Carefully peel off the isolation film from the charging contacts on each earbud.
  3. Place both earbuds back into the charging case and close the lid. This step activates the new device.
  4. Open the charging case lid again. The earbuds will automatically power on. If they do not, please charge them and try again.
  5. On your phone, refresh the Bluetooth device list.
  6. Select "QCY MeloBuds Pro" from the list to complete the pairing.
Earbuds with isolation film to be removed

Remove the isolation film from the earbud charging contacts before first use.

Wearing the Earbuds

  1. Wear the left and right earbuds correctly.
  2. After wearing, gently rotate and adjust them to find a comfortable and secure position.
  3. Ensure the microphone opening faces downwards, towards your mouth.

Tip: Incorrect earbud placement can affect call quality and hearing. If the Active Noise Cancellation (ANC) effect is weakened, try adjusting the wearing angle and direction, then re-enabling adaptive noise cancellation mode.

Operating Instructions

Touch Controls

  • Power On: Open the charging case lid (with earbuds inside).
  • Power Off: Place the earbuds into the charging case and close the lid.
  • Answer/Hang Up Call: Double-tap the touch panel.
  • Reject Call: Long-press the touch panel for 1.5 seconds.
  • Play/Pause: Double-tap the touch panel.
  • Next Track: Triple-tap the right earbud's touch panel.
  • Voice Assistant: Triple-tap the left earbud's touch panel.
  • Low Latency Mode: Long-press the left earbud's touch panel for 1.5 seconds.
  • Adaptive ANC/Normal Mode/Transparency Mode: Long-press the right earbud's touch panel for 1.5 seconds to cycle through these modes.

Note: LDAC is enabled by default. If you need to disable it, please do so in the QCY APP.

Adaptive Active Noise Cancellation (ANC) & Transparency Mode

The MeloBuds Pro features 46dB Hybrid ANC, reducing noise by up to 99%. It also offers a Dual Transparency Mode for simple communication without removing your earbuds.

Adaptive Active Noise Cancellation with ANC and Transparency Mode waveforms

Adaptive Active Noise Cancellation reduces noise by up to 46dB, covering a range of 20Hz to 2500Hz. Transparency mode allows you to stay aware of your surroundings.

Dual Transparency Mode with 6-level transparency and Vocal Enhance options

Dual Transparency Mode includes 6-level transparency and Vocal Enhance modes for clear communication.

Multi-Device Connection

The earbuds support connecting to two devices simultaneously. This feature needs to be enabled in the QCY APP settings.

One-Key Switch Paired Device (e.g., from Device A to Device B)

  1. Open the charging case lid with both earbuds inside.
  2. Long-press the charging case button for approximately 3 seconds. The earbuds will flash white once.
  3. On Device B, search for the earbuds and click to connect.

Multi-Device Connection Method

  1. Power on the earbuds to enter pairing mode. After connecting to Device A, turn off Bluetooth on Device A. The earbuds will re-enter pairing mode.
  2. On Device B, turn on Bluetooth and click the earbud's pairing name "QCY MeloBuds Pro" to complete pairing.
  3. On Device A, turn on Bluetooth and click the previously paired earbud's name. Pairing is successful. At this point, the earbuds are simultaneously connected to both devices.

Note: The one-to-two function and LDAC audio decoding format cannot be enabled simultaneously.

Multipoint Connection and In-ear Detection feature showing earbuds connected to a phone and a tablet via Bluetooth 5.3

MeloBuds Pro can connect two devices simultaneously, allowing quick switching between them.

Charging and Maintenance

Earbuds Charging

When charging, the red light on the earbuds stays on. It turns off when fully charged.

Charging Case Charging

Use the provided Type-C charging cable to charge the case.

  • During charging: The red light on the case stays on.
  • Fully charged: The white light on the case stays on.

Charging Case Battery Status Indicator

  • Sufficient battery: When the charging case is opened, the white light stays on for 5 seconds before turning off.
  • Low battery: When the charging case is opened, the red light stays on for 5 seconds before turning off.
34 Hours Playtime Quick Charge diagram showing 34 hours with charging case, 8.5 hours single charge, and 10 minutes charge for 1 hour playback

The earbuds offer 8.5 hours of single charge playtime, extending to 34 hours with the charging case. A quick 10-minute charge provides 1 hour of audio playback.

General Maintenance Tips

  • Read and retain this user manual carefully.
  • Fully charge the product before first use.
  • If the product is not used for an extended period (more than 2 weeks), recharge it.
  • Always use a charger produced by a legitimate manufacturer and certified by national safety authorities.
  • Do not wipe this product with oil or other volatile liquids.

Troubleshooting

Factory Reset (Clearing Pairing Records)

This method is used when connection issues occur.

  1. Place both earbuds in the charging case.
  2. Open the charging case lid.
  3. Long-press the charging case button for 10 seconds. The earbuds will flash red 5 times.
  4. The reset is complete after the blinking stops.

Tip: After factory reset, you can connect normally using the initial pairing method.

Common Issues and Solutions

  • Only one earbud has sound: Put both earbuds back into the charging case, close the lid, then take them out again to check if both earbuds have sound. If the issue persists, perform a factory reset.
  • Phone prompts unable to connect: Delete the pairing record for "QCY MeloBuds Pro" on your phone, then search and pair again.
  • No sound during music/calls (Android phones): Go to Bluetooth settings for "QCY MeloBuds Pro", click the settings icon, turn off and then re-enable "phone audio" and "media audio". If still no sound, re-pair the earbuds with the phone.
  • Video/game latency: Latency can occur due to factors such as usage environment, network, and phone codecs when transmitting audio data to the earbuds.
  • Sound stuttering/disconnection: If there are many Wi-Fi, 5G/4G signals, or high-power electrical appliances causing interference in the surrounding environment, it may lead to stuttering or disconnection. Try changing the environment or re-pairing.
  • Phone cannot search for Bluetooth earbuds: Put the Bluetooth earbuds back into pairing mode or factory reset them. If the phone program is faulty, turn off and then turn on Bluetooth on the phone or restart the phone.

Specifications

FeatureSpecification
Brand NameQCY
ModelMeloBuds Pro (HT08)
Bluetooth Version5.3
CommunicationTrue wireless
Active Noise-CancellationYes (46dB Hybrid ANC)
Sound IsolatingYes
Driver Diameter12mm
Number Of Drivers6
CodecsLDAC
Battery Capacity (Earbuds)350mAh (Charging Case)
Battery Life (up to)34 hours (with charging case)
Charging MethodCharging case (Type-C)
Maximum wireless range10m-20m
WaterproofYes
Voice assistant built-inYes
Support APPYes
Package ListUser Manual, Charging case, Charging Cable
CertificationsCE, RoHS

Hi-Res Audio with LDAC

The 12mm drivers, Hi-Res certified, and LDAC technology deliver 3 times more sound detail than SBC, reproducing rich original sound for a live-like experience.

Hi-Res Audio with LDAC diagram showing QCY MeloBuds Pro 990kbps bit rate compared to Normal earbuds SBC 328kbps

LDAC provides significantly higher bit rates for detailed audio transmission compared to standard SBC.

Safety Information

  • Do not disassemble or modify the battery, insert foreign objects, place it in high temperature, or immerse it in water or other liquids. This can cause battery leakage, overheating, fire, or explosion. Battery replacement should only be done by the manufacturer.
  • Do not drop, crush, or puncture the battery. Avoid exposing the battery to large external pressure, which may cause internal short circuits and overheating.
  • Do not dismantle or modify the earbuds for any reason, as it may result in fire, electronic breakdown, or permanent damage to the product.
  • Do not expose the product to extremely low or high temperatures (below 0°C or above 45°C).
  • Avoid using the product indicator light near the eyes of children or animals.
  • Do not use the product during thunderstorms, as it may cause abnormal operation and increase the risk of electric shock.
  • Do not wipe this product with oil or other volatile liquids.
  • Long-term use of headphones at high volume may cause hearing damage. Please arrange usage time reasonably.

Warranty and Support

Your QCY product purchase is covered by a one-year limited manufacturer warranty from the date of delivery. Please retain your purchase receipt. If any defects occur due to quality issues within the warranty period, kindly bring both the warranty card and the purchase receipt to the authorized dealer for complimentary replacement services.

Warranty Exclusions

The manufacturer's warranty is void under the following circumstances (but not limited to):

  • Improper or inadequate maintenance or modification.
  • Accident, misuse, abuse, contamination, or other external causes.
  • The use of unspecified adapter and accessories.
  • Malfunctions or damages resulting from natural disasters, earthquakes, lightning, abnormal voltage, or environmental factors.
  • Damages that occur as a result of one's failure to follow the instructions in this manual.

Contact Information

For after-sales service or support, please contact customer service:

  • Phone: 4008-306-708
  • Website: www.qcy.com
  • Manufacturer: Dongguan Hele Electronics Co., Ltd.
  • Address: No. 325 Yuehui Rd. Daojiao Town, Dongguan City, Guangdong Province, China

A detailed user manual is also available in PDF format: User Manual (PDF).

User Tips

  • Effective Noise Cancellation: Users report that the noise cancellation is very effective, making it ideal for blocking out ambient sounds.
  • Customization via QCY App: Take advantage of the QCY app for customizable buttons, EQ tuning, and fine-tuning ANC/Transparency modes.
  • Earbud Orientation: Pay attention to the orientation of the earbuds when placing them in the charging case to ensure proper fit and charging.
  • LDAC Audio: The earbuds support LDAC for high-resolution audio. If you experience compatibility issues or prefer to save battery, you can disable LDAC in the QCY app.

Additional Media

Product Video

Official product video showcasing the QCY MeloBuds Pro features, including immersive sound, adaptive ANC, transparency mode, 6 AI ENC microphones, and Hi-Res LDAC audio.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.