1. Important Safety Information
Please read and retain this user manual carefully before using the product.
- If the product is not used for an extended period (more than 2 weeks), please recharge it.
- You must choose a charger produced by a legitimate manufacturer and certified by the national safety authority.
- If your phone cannot detect the Bluetooth earbuds, either re-enter pairing mode or perform a factory reset on the Bluetooth earbuds. If there is a phone program error, close and reopen Bluetooth on the phone or restart the phone.
- Do not disassemble or modify the battery, insert foreign objects, expose it to high temperatures, or immerse it in water or other liquids to prevent battery leakage, overheating, ignition, or explosion. Battery replacement should only be done by the manufacturer.
- Do not drop, crush, or puncture the battery. Prevent external pressure that may lead to internal short circuits and overheating.
- Do not dismantle or modify the earbuds for any reason, as it may result in fire, electronic breakdown, or permanent damage to the product.
- Do not expose the product to extremely low or high temperatures (below 0°C or above 45°C).
- Do not point the product indicator light near the eyes of children or animals.
- Do not use the product during thunderstorms, as it may cause abnormal operation and increase the risk of electric shock.
- Do not use oil or other volatile liquids to clean the product.
- Please do not use this device for long periods of time and at high volume, as there is a risk of hearing damage.
2. Package Contents
The QCY HT10 AilyBuds Pro+ package typically includes:
- User Manual
- Charging case
- Charging Cable
3. Product Overview
Familiarize yourself with the components of your QCY HT10 AilyBuds Pro+ earphones.


Key components:
- Sound Hole: For audio output.
- LED Indicator: Provides status information.
- Touch Panel: For controlling various functions.
- Pogo Pins: Charging contacts on the earbuds.
- Charging Case: Stores and charges the earbuds.
- Type-C Charging Cable: For charging the case.





4. Setup
Wearing Instructions
- Properly wear the earbuds on both the left and right sides. After wearing them, you can make slight adjustments by rotating to find a personally comfortable and secure position.
- Ensure the microphone opening is facing downward towards the mouth.
- Incorrect earbuds placement may affect both calls and hearing to varying degrees. If the fit is not snug enough, the ANC noise cancellation effectiveness may decrease. Try adjusting the wearing angle and direction before reactivating the adaptive noise cancellation mode.
Initial Pairing
- Take out both earbuds, peel off the isolation film from each, and place them back into the charging case. Close the lid to activate the new device.
- Retrieve both earbuds again.
- Refresh your phone's Bluetooth devices, pair with QCY AilyBuds Pro+ and complete the setup.
Note: Opening the charging case turns on the earbuds. If not, try again after charging.
Multi-Device Connection (Enable in the QCY APP settings)
- Power on the earbuds to initiate pairing. After connecting to Device A, turn off Bluetooth on the phone. The earbuds will enter pairing mode again.
- Enable Bluetooth on Device B and select QCY AilyBuds Pro+ for pairing.
- On Device A, turn on Bluetooth and click the paired earbuds name. Successful pairing means the earbuds are now connected to both devices simultaneously.
Note: The one-drag-two function and LDAC audio decoding format cannot be enabled simultaneously.
One-Click Device Switching (from Device A to Device B)
Open the lid, keep both earbuds in the charging case, and press the case button for about 3 seconds. The earbuds will flash red once. Search for them on the device and click to connect.
The earbuds support connecting to two devices simultaneously. (Enable in the QCY APP settings)
5. Operating Instructions
Touch Controls
- Power On: Open the charging case (earbuds inside) or, if the earbuds are outside the case, long-press the touch panel for 1.5 seconds.
- Power Off: Place the earbuds into the charging case and close the lid.
- Answer/End Call: Double-tap the touch panel.
- Reject Call: Long-press the touch panel for 1.5 seconds.
- Play/Pause: Double-tap the touch panel.
- Next Track: Triple-tap the right ear touch panel.
- Voice Assistant: Triple-tap the left ear touch panel.
- Low Latency: Long-press the left ear touch panel.
- ANC Mode: Long-press the right ear touch panel to toggle the Adaptive ANC switch.
Charging
- Earbuds Charging: While charging, the red light stays on and turns off when fully charged.
- Charging Case Charging: During charging, the red light stays on. Fully charged, the white light stays on.
Charging Case Battery Status
- Sufficient battery: When the charging case is opened, the white light will stay on for 5 seconds before turning off.
- Low battery: When the charging case is opened, the red light will stay on for 5 seconds before turning off.
- Insufficient battery: When the charging case has insufficient battery, the red light will quickly flash three times before turning off.
6. Maintenance
To ensure the longevity and optimal performance of your QCY HT10 AilyBuds Pro+ earphones, follow these maintenance guidelines:
- Keep the earbuds and charging case clean and dry. Avoid exposure to excessive moisture or liquids.
- Use a soft, dry cloth to wipe the earbuds and charging case regularly.
- Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the product.
- Store the earphones in their charging case when not in use to protect them from dust and physical damage.
- Avoid extreme temperatures. Do not leave the earphones in direct sunlight or in very cold environments.
- Charge the earphones regularly, even if not in frequent use, to maintain battery health.
7. Troubleshooting (FAQ)
Common Issues and Solutions
- Only one earbud has sound, how to solve it?
Place both earbuds back into the charging case, close the lid, then take them out again to check if both have sound. If only one earbud still has sound, perform a factory reset on both earbuds. - The phone indicates it cannot connect, how to solve it?
Delete the pairing record on your phone, then search and pair again. - No sound during music playback/calls, how to solve it?
For Android phones, go to the Bluetooth settings for the connected earbuds, turn off and then re-enable 'Phone audio' and 'Media audio'. If there is still no sound, re-pair the earbuds with your phone. - Why is there a delay in video/games?
Due to factors such as the usage environment, network, and phone codec, there may be varying degrees of delay when the phone transmits audio data to the earbuds. - Why does the sound stutter/disconnect?
If there are many Wi-Fi, 5G/4G signals, high-power appliances, etc., causing interference in the surrounding environment, it may lead to stuttering or disconnection. Try changing the environment or re-pairing the earbuds.
Factory Reset (Use in case of connection issues)
Place the earbuds in the charging case, open the lid, and press the charging case button for 10 seconds. The earbuds will flash red 5 times, indicating the reset is complete after the blinking stops. After the factory reset, follow the initial pairing method to connect for normal usage.
8. Specifications
| Attribute | Value |
|---|---|
| Brand Name | QCY |
| Model | Other (HT10 AilyBuds Pro+) |
| Material | ABS, Plastic |
| Battery Capacity [mAh] | 350 |
| Battery life up to [hours] | 28 |
| Voice assistant built-in | Yes |
| Maximum wireless range [m] | 10m-20m |
| NFC Technology | No |
| Sound Isolating | Yes |
| Category | Earphones & Headphones |
| Earcups Type | Semi-open |
| Number Of Drivers | 6 |
| Charging Method | Charging case |
| Headphone Pads Material | Other |
| Magnet Type | Other |
| Driver Diameter | 13mm |
| Bluetooth Version | 5.3 |
| Features | Waterproof, Active Noise Cancelling, Dual Connection |
| Codecs | LDAC |
| With Microphone | Yes |
| Is wireless | Yes |
| Support APP | Yes |
| Waterproof | Yes |
| Function | For Internet Bar, for Video Game, Common Headphone, For Mobile Phone, HiFi Headphone, Sport, For Outdoor, For Study |
| Active Noise-Cancellation | Yes |
| Volume Control | Yes |
| Control Button | No |
| Vocalism Principle | Dynamic |
| Wireless Type | Bluetooth |
| Connectors | Type C |
| Communication | True wireless |
| Style | Wired in-ear headphones (Note: This seems to be a misclassification, as the product is 'True wireless') |
| Certification | CE, RoHS, BQB |
| Origin | Mainland China |
| Support Memory Card | No |
Package Dimensions
- Length: 12 cm
- Width: 8 cm
- Height: 3 cm
- Weight: 0.12 kg
9. User Tips
To enhance your experience with the QCY HT10 AilyBuds Pro+ earphones:
- Utilize the QCY App: Download and install the QCY mobile app to access advanced features like ambient sound modes, EQ tuning, and firmware updates for a personalized audio experience.
- Proper Fit: Ensure a snug and comfortable fit for optimal sound quality and effective Active Noise Cancellation. Adjust the earbuds slightly if you notice reduced ANC performance.
- Battery Management: Regularly charge your earbuds and charging case to avoid interruptions, especially if you plan for extended listening sessions.
10. Warranty & Support
Warranty Information
Your QCY product purchase is covered by a one-year limited manufacturer warranty from the date of delivery. Please ensure you retain your purchase receipt. If any defects occur due to quality issues within the warranty period, kindly bring both the warranty card and the purchase receipt to the authorized dealer for complimentary replacement services.
The manufacturer's warranty is void under the following circumstances (but not limited to):
- Improper or inadequate maintenance or modification.
- Accident, misuse, abuse, contamination, or other external causes.
- The use of unspecified adapter and accessories.
- Malfunctions or damages resulting from natural disasters, earthquakes, lightning, abnormal voltage, or environmental factors.
- Damages that occur as a result of one's failure to follow the instructions.
Contact Information
For after-sales service, please contact customer service:
- Phone: 4008-306-708
- Website: www.qcy.com
- Manufacturer: Dongguan Hete Electronics Co., Ltd.
- Address: No. 325 Yuehui Rd. Daojiao Town Dongguan City, Guangdong Province, China
Additional Resources
A detailed user manual in PDF format is available for download. You can view it here: QCY HT10 AilyBuds Pro+ User Manual (PDF)
11. Environmental Information
Product Hazardous Substance Names and Content
| Part Name | Lead (Pb) | Mercury (Hg) | Cadmium (Cd) | Hexavalent Chromium (Cr(VI)) | Polybrominated Biphenyls (PBB) | Polybrominated Diphenyl Ethers (PBDE) |
|---|---|---|---|---|---|---|
| Outer Casing | O | O | O | O | O | O |
| Circuit Board Components | X | O | O | O | O | O |
| Battery | O | O | O | O | O | O |
| Charging Cable | X | O | O | O | O | O |
| Accessories | O | O | O | O | O | O |
Note:
- O: Indicates that the hazardous substance content in all homogeneous materials of this component is below the limit requirements specified in GB/T 26572.
- X: Indicates that the hazardous substance content in at least one homogeneous material of this component exceeds the limit requirements specified in GB/T 26572.
Service Life
As stated in this manual, under normal use conditions, the environmental protection service life of this product is 10 years. During this period, the product will not leak any hazardous substances and can be recycled according to local regulations.