1. Introduction
Thank you for choosing the XSDTS K10-2 Smart Door Lock. This electronic lock offers multiple unlocking methods including fingerprint, mechanical keys, card, password, and Bluetooth via the Tuya Smart APP. Designed for ease of use and enhanced security, it is suitable for various door types including steel, wooden, brass, and stainless steel doors, with a thickness range of 35-75mm.
XSDTS K10-2 Smart Door Lock Overview
2. Safety Information
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Important: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment.
3. Packing List
Please unpack the product package and check whether the following accessories are included:
Included Components Diagram
- Smart Lock (Front and Rear Knobs) x 1
- Latch x 1
- Strike Plate x 1
- Keys x 2
- Pin x 1
- Screws x 6
- Gusset Plate x 1
- Gusset Box x 1
- Installation Key x 1
- Pull Bolt x 1
- Lock Body Screw x 1
4. Installation
4.1. Installation Video Guide
Official Smart Lock Installation Video
4.2. Step-by-Step Installation Instructions
Follow these steps to install your smart door lock:
Visual Guide for Installation Steps
- Remove the Rear Lock:
- Remove the front panel.
- Use the Installation Key to align with the hole and press down the spring.
- Remove the rear lock handle.
- Install the Lock Body (Latch):
- Install the single latch into the corresponding slot in the door.
- Fix it with screws.
- Install the Front Lock:
- Insert the spindle and standoffs into the corresponding holes of the single latch.
- Pass the tail measure through the square rod hole of the lock body.
- Install the Rear Lock:
- Insert the pin into the hole, separating the rosette from the Interior Knob.
- Pass the tail measure through the square rod hole of the rear lock.
- Align the gap in the rear lock handle with the gap in the lock body.
- Put the rear lock handle on.
- Secure the Knobs:
- Use the screws to secure the interior knob, ensuring the UP face is upward.
- Screw on the rosette screws.
- Adjust Knob Direction:
- Adjust the direction of the knob horizontally and vertically so that the knob and the tail measure are in the same direction.
- Make sure the spindle bar is in the vertical position and rotate the thumb turn to the circular mark. Last, insert the Interior Knob into the rosette.
5. Usage and Operation
5.1. Fingerprint Recognition
The lock features fast fingerprint identification (0.1S). It can store up to 20 fingerprints (the first 3 are administrators, and the remaining 17 are regular users).
Fingerprint Recognition
5.2. Mechanical Knob Operation
Locking and Unlocking Modes
- Normally Open Mode: Rotate the knob in the door to open vertically. When the lock is in the normally open state, the fingerprint is continuously verified twice within 3 seconds, and the fingerprint unlock is verified once after the lock is closed.
- Locked Mode: When the knob in the door is rotated to the horizontal position, it is reversed and locked.
- Anti-lock Mode: When the lock is in anti-lock mode, only the administrator's fingerprint can be matched. The lock will automatically anti-lock after 5 seconds of unlocking.
6. Advanced Features
6.1. Restore Factory Settings
There are two methods to restore the lock to factory settings and clear all data:
- Via Tuya App: Data can be emptied through the Tuya app (see section 7.3 for details).
- Local Operation: After repeatedly rotating the knob 5 times within 5 seconds, the lock will enter the factory reset state. The blue light of the fingerprint head will be continuously on. Touch any fingerprint within 10 seconds to clear the data. The buzzer will beep for a long time to indicate success.
Local Factory Reset Operation
6.2. Definition of Lights and Buzzers
- Successful Identification: Green light turns on, buzzer sounds once.
- Failed Identification: Red light flashes 3 times, buzzer sounds twice.
- Charging: Red light is on.
- Fully Charged: Green light is on.
- Low Power Alarm: Red light flashes 5 times after opening the door.
6.3. Low Power Consumption State
- Not Bound to Bluetooth: The device enters sleep mode if no fingerprint is touched or knob twisted within 15 seconds. Bluetooth cannot be searched. To wake up, touch the fingerprint or press the button.
- Bound to Bluetooth: The device enters sleep mode if no fingerprint is touched or knob twisted for 4 seconds. It does not need to be woken up, and the mobile phone can directly initiate a Bluetooth connection via the Tuya Smart APP.
6.4. Trial and Error Locking
The device will enter a 120-second lock state after 5 consecutive recognition errors. During this time, the fingerprint will not respond, and an alarm will sound for 10 seconds. The lock can only be unlocked by Bluetooth or by waiting for 120 seconds.
6.5. Aging Mode
To enter aging mode, touch the fingerprint for 10 seconds without entering a valid fingerprint. The white light will flash twice, and the buzzer will sound three times. Release your hand, and the device will be in aging mode. Touching the fingerprint head again will exit aging mode.
7. Tuya Smart APP Integration
The Tuya Smart APP allows you to configure and control your smart lock, manage users, and set up automation solutions. Fingerprint registration is done exclusively through the Tuya Smart APP via Bluetooth.
7.1. Download and Setup
- Download the Tuya Smart App from your mobile App Market (e.g., Google Play Store or Apple App Store).
- Alternatively, scan the QR code below to download the app:
Tuya Smart APP QR Code
- Open your phone's Bluetooth and Location services.
- Open the Tuya Smart App.
7.2. Connecting the Device
- From the main interface of the Tuya App, select "Add Device" or the '+' icon.
- The app will search for nearby devices. Ensure the lock is awake (touch fingerprint or twist knob).
- Select your smart lock from the discovered devices to start connecting.
- Once connected, the app will confirm the connection success.
Tuya App Main Interface
Select Device Manually
Discovering Devices
Connecting
Connection Success
7.3. Managing Users and Settings
From the lock's homepage in the Tuya App, you can:
- Add or remove members/fingerprints.
- Change names for registered users.
- Access other smart features and scenes.
Tuya App Homepage
7.4. Removing the Device / Unbinding
To remove the device from the app and clear its data:
- Navigate to the device settings in the Tuya App.
- Select "Remove Device".
- Confirm unbinding and choose to clear data if prompted.
Remove Device Option
Confirm Unbinding
8. Emergency Unlocking
In case of battery depletion or other issues, you can unlock the door using the following methods:
- Mechanical Key: Use the provided mechanical keys to unlock the door. It is recommended to keep at least one key outside the door for emergencies.
- External Power Supply: If the battery is completely dead, you can power the lock via the micro-USB port (located on the exterior knob) using a power bank or USB charger. Once powered, you can use your fingerprint or other electronic methods to unlock.
Unlock with a Mechanical Key
Plug the USB power cable into the connector
9. Product Specifications
| Function/Performance | Parameters | Remarks |
|---|---|---|
| Operating Voltage | 3.3-4.2V | Nominal Voltage 3.7V |
| Alarm Voltage | 3.5±0.1V | (1) Low battery detection, local voice prompts (2) Unlock more than 50 times after low voltage alarm |
| Deep Sleep Power Consumption | ≤30uA | |
| Static Power Consumption | ≤50 uA | (1) Measurement method: Long standby power consumption credit |
| Dynamic Power Consumption | ≤200 mA | |
| Working Temperature | -25°C~+70°C | |
| Storage Temperature | -40°C~+85°C | Complies with GA374-2019 Standards |
| Humidity Requirements | < 93% RH | |
| ESD Protection | Contact +/- 8kV, air +/- 15kV | |
| Fingerprint Capacity | 20 (3 administrators, 17 regular users) | |
| Product Material | Aluminum Alloy | |
| Power Supply | DRY BATTERY (Ternary lithium battery) | |
| Applicable Door Thickness | 35-75mm | |
| Unlock Method | Fingerprint/Password/APP/Mechanical Keys/Card | |
| Applicable Doors | Domestic and foreign wooden door/office door/extremely narrow door/ecological door |
10. Troubleshooting
- Fingerprint not recognized: Ensure your finger is clean and dry. Try re-registering your fingerprint through the Tuya app. If multiple attempts fail, the lock may enter trial and error locking mode (see section 6.4).
- Limited Fingerprint Capacity: The lock supports up to 20 fingerprints (3 administrators, 17 regular users). If you are unable to add more, ensure you are not exceeding this limit. If issues persist, perform a factory reset and re-register.
- Lock/Unlock Symbols Misaligned: Some users have reported that the lock/unlock symbols do not align with the actual functionality. This may be a design inconsistency. Refer to the operational instructions (section 5.2) for correct usage.
- Door does not unlock from inside: If the lock is in anti-lock mode, you may need to manually disengage the anti-lock mechanism (unsnib) before turning the handle.
- Lock unresponsive (dead battery): Use a mechanical key or connect a power bank via the micro-USB port for emergency power (see section 8).
- Bluetooth Connectivity Issues: Ensure your phone's Bluetooth and location services are enabled. Wake up the lock by touching the fingerprint sensor or twisting the knob before attempting to connect via the Tuya app.
- Gateway (Wi-Fi) Functionality: The lock primarily uses Bluetooth. If you have a gateway, ensure it is properly configured and within range to bridge the Bluetooth connection to Wi-Fi for remote access. Note that the lock itself is Bluetooth-based, not direct Wi-Fi.
11. User Tips
- Keep a Spare Key: Always keep at least one mechanical key in a safe, accessible location outside the door for emergency unlocking.
- Monitor Battery Life: Pay attention to the low power alarm (red light flashes 5 times after opening the door). Charge the lock promptly to avoid being locked out.
- Understand Lock Modes: Familiarize yourself with the 'Normally Open' and 'Locked' modes, as well as the 'Anti-lock' feature, to ensure smooth operation.
- Tuya App for Full Control: Utilize the Tuya Smart APP for managing fingerprints, passwords, and other advanced settings. It provides the most comprehensive control over your smart lock.
- Installation Check: After installation, double-check that all screws are tightened and the knob operates smoothly.
12. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the official product documentation or contact your retailer. Keep your purchase receipt as proof of purchase.
You can also refer to the official user manual PDF for additional guides and documents: View User Manual (PDF)