XSDTS F2

Contents

XSDTS F2 Smart Door Lock User Manual

Model: F2 | Brand: XSDTS

1. Introduction

The XSDTS F2 Smart Door Lock is an advanced security solution designed for modern homes and offices. It offers multiple convenient unlocking methods including fingerprint, password, mechanical key, IC card, and app control via Bluetooth and the Tuya smart home platform. This manual provides detailed instructions for installation, setup, operation, and maintenance to ensure optimal performance and security.

XSDTS F2 Smart Door Lock with fingerprint sensor and keypad
The XSDTS F2 Smart Door Lock, featuring fingerprint and keypad access.

2. Package Contents

Please verify that all the following items are included in your package:

  • Front Lock Handle (with fingerprint sensor and keypad)
  • Rear Lock Handle (with battery compartment)
  • Lock Body (latch mechanism)
  • Square Bar (spindle)
  • Keys (mechanical override)
  • Shell Gasket
  • Spiral Tube Screw
  • Data Cable (for emergency power)
  • Buckle Accessories
  • Pulling Screws
  • Screwdriver
All components of the XSDTS F2 Smart Door Lock laid out
All components included with the XSDTS F2 Smart Door Lock.

3. Specifications

FeatureSpecification
Brand NameXSDTS
Model NumberF2
Power SupplyDRY BATTERY
Protection LevelNo Waterproof
Fit Door Thickness40-90cm
Suitable Door TypeSteel Door, Wooden Door, Brass Door, Stainless Steel Door
Special FeaturesBuilt-in Doorbell
Doorknob FunctionBiometric, Key & Keypad
ConnectivityBluetooth
Ways To UnlockApp, Bluetooth, Mechanical Keys, Card, Password, FINGERPRINT
MaterialZinc Alloy
Handle DirectionDirection Reversible
CertificationCE, FCC
Smart Home PlatformTuya
Package DimensionsLength: 23cm, Width: 18cm, Height: 8cm
Package Weight0.746 kg
Diagram showing dimensions of the XSDTS F2 Smart Door Lock and its latch mechanism
Detailed dimensions of the lock and its components.

4. Installation Guide

Follow these steps carefully to install your XSDTS F2 Smart Door Lock. A video tutorial is also available below for visual guidance.

  1. Prepare the Front Lock: Install the front lock bolt. Insert the front lock sleeve and tighten it with pliers.
  2. Prepare the Square Rod: Thread the power cable through the square rod. Align the square rod with the square gold casting inside the hole of the front lock, and insert the square rod completely to the bottom.
  3. Prepare the Rear Lock: Unscrew the rear lock battery cover and open the battery box cover.
  4. Install Lock Body: Insert the lock body into the door edge. Ensure the square rod hole of the lock body is centered with the door hole. If not, adjust the lock body by grasping the square rod holes on both sides and pulling them back to switch between 60mm and 70mm backsets. Pushing inward can switch from 70mm to 60mm.
  5. Secure Lock Body: Tighten the screw on the lock body.
  6. Install Front Lock: Thread the power cable from the front lock through the lock body's square rod hole. Pass the square rod through the lock body's square rod hole.
  7. Install Rear Lock: Thread the power cable from the rear lock through the rear lock handle. Install the rear lock onto the door, ensuring the square rod aligns.
  8. Secure Rear Lock: Tighten the screw on the rear lock.
  9. Adjust Panels: Adjust the front and rear panels to ensure they are flush and properly aligned.
  10. Tighten Panel Screws: Securely tighten the screws for both the front and rear panels.
  11. Connect Power: Connect the front panel power cord to the rear panel's power port.
  12. Install Batteries: Insert the required dry batteries into the battery compartment of the rear lock.
  13. Close Rear Lock: Carefully insert the power cord inside the rear lock handle and fasten the rear lock battery cover.
  14. Final Tightening: Tighten the screw on the rear lock battery cover.

Your installation is now complete.

Video tutorial demonstrating the installation process of the XSDTS F2 Smart Door Lock.
Diagram showing how to adjust the handle direction for left or right-handed doors
The door handle is reversible for both left and right-handed doors. Adjust the set screw as shown to change direction.

5. Initial Setup & App Configuration

To fully utilize the smart features of your XSDTS F2 lock, you will need to set it up with the Tuya Smart app.

  1. Download the App: Scan the QR code provided on the product packaging or in the image below to download the Tuya Smart app from your device's app store.
  2. Create Account: Open the Tuya Smart app and register for a new account or log in if you already have one.
  3. Add Device: Follow the in-app instructions to add your smart door lock. Ensure Bluetooth is enabled on your smartphone.
  4. Register Fingerprints: Once the lock is paired, navigate to the device settings in the app to register fingerprints. Follow the on-screen prompts to scan your finger multiple times for accurate recognition.
  5. Set Passwords: Create and manage user passwords through the app. You can also set temporary passwords for guests.
  6. Add IC Cards: If your model supports IC card unlocking, use the app to register your IC cards.
QR codes for app installation, operation, and app setup
Scan the QR code for App setup to configure your smart lock.

6. Operating Instructions

Your XSDTS F2 Smart Door Lock offers multiple ways to unlock your door:

  • Fingerprint Unlock: Place your registered finger on the fingerprint sensor. The lock will unlock if the fingerprint is recognized.
  • Password Unlock: Enter your registered password on the keypad, followed by the '#' key. The lock will unlock if the password is correct.
  • Mechanical Key Unlock: In case of emergency or battery depletion, insert the mechanical key into the keyhole and turn to unlock.
  • App Unlock (Bluetooth): Use the Tuya Smart app on your smartphone to unlock the door via Bluetooth when you are within range.
  • IC Card Unlock: Present a registered IC card to the card reader area on the lock to unlock.
  • Temporary Password Unlock: Generate temporary passwords via the Tuya Smart app for one-time or time-limited access.
Image showing various unlocking methods: Temporary Password, IC Card, Password, Fingerprint, Manual Key, App Unlock
Multiple convenient unlocking methods are available for your smart lock.

7. Maintenance

  • Battery Replacement: The lock is powered by dry batteries. Replace them promptly when the low battery indicator appears or when the lock's performance degrades. Always use new, high-quality batteries of the specified type.
  • Cleaning: Clean the lock's exterior with a soft, dry cloth. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish and electronic components. Keep the fingerprint sensor clean and free of debris.
  • Water Exposure: This lock is not waterproof. Avoid exposing it to rain, excessive moisture, or direct water spray to prevent damage to internal electronics.
  • Mechanical Key: Keep the mechanical keys in a safe and accessible location outside the locked area for emergency access.

8. Troubleshooting

  • Lock not responding: Check if the batteries are depleted. Replace them if necessary. Ensure the power cord connection inside the lock is secure.
  • Fingerprint not recognized: Ensure your finger is clean and dry. Try re-registering your fingerprint in the app. Ensure the sensor is clean.
  • Password not working: Double-check the entered password. Ensure the keypad is clean and responsive. Try re-setting the password via the app.
  • Door not locking/unlocking smoothly: Verify that the lock body and strike plate are correctly aligned. Check for any obstructions in the door frame or latch mechanism.
  • App connectivity issues: Ensure Bluetooth is enabled on your phone and the lock is within range. Restart the app or your phone. Check the Tuya Smart app for any updates or server issues.
  • Emergency Power: If batteries are completely dead, you can use the data cable to provide temporary power via a power bank to unlock the door using a registered method.

9. User Tips

  • For optimal security, register multiple fingerprints for each authorized user.
  • Regularly check the battery status through the Tuya Smart app to avoid unexpected lockouts.
  • Consider using a strong, unique password and changing it periodically.
  • Ensure the door closes properly and the latch aligns with the strike plate to prevent wear and tear on the lock mechanism.
  • Keep the mechanical keys in a secure, easily accessible location outside your home for emergency use.

10. Warranty & Support

The XSDTS F2 Smart Door Lock comes with a standard manufacturer's warranty. For specific warranty details, technical support, or service inquiries, please refer to the official product page or contact the seller directly. Keep your purchase receipt as proof of purchase.

A user manual in PDF format is also available for download: Download User Manual (PDF)


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.