EJEAS V6 Pro / V4 PLUS Mounting Clip and Base

Contents

EJEAS V6 Pro / V4 PLUS Helmet Intercom System User Manual

Model: V6 Pro / V4 PLUS (Accessories for 3.5mm Jack versions)

Brand: EJEAS (Accessories by XINOWY)

1. Product Overview

The EJEAS V6 Pro is a high-performance, stable Helmet Bluetooth Intercom system designed for motorcycle riders. It offers a maximum talking distance of up to 800 meters in open outdoor environments, typically ranging from 300 to 800 meters. It also functions as a high-performance Bluetooth headset with a range of 10 meters for phone calls and music.

Key features include automatic phone call reception for convenience and safety, a waterproof design, and HD-Voice technology. The intercom is built using a modern production process with an ultrasonic, screw-free structure, ensuring durability and reliability for safe riding.

This manual specifically covers the EJEAS V6 Pro and V4 PLUS intercom systems, and the compatible mounting accessories (clips and double-sided tape bases) provided by XINOWY.

2. Package Contents

Depending on your purchase, your package may contain:

  • 2 x Mounting Clips
  • 2 x Double-Sided Adhesive Bases
  • (Intercom unit and other accessories sold separately)
Two mounting clips
Two Mounting Clips
Two mounting clips and two adhesive bases
Two Mounting Clips and Two Adhesive Bases

3. Installation

The EJEAS V6 Pro / V4 PLUS intercom unit can be mounted to your helmet using either a mounting clip or a double-sided adhesive base. Ensure compatibility with your specific intercom model (V6 Pro / 3.5mm V4 PLUS, not V6 Pro+).

3.1 Compatibility Check

Compatibility diagram showing V6 Pro and V6 Pro+ intercoms, clip interfaces, and mounting clips. V6 Pro is compatible, V6 Pro+ is not.
Ensure your intercom is compatible (V6 Pro or V4 PLUS with 3.5mm jack, not V6 Pro+).

As shown in the diagram, the mounting accessories are designed for the EJEAS V6 Pro and V4 PLUS (with 3.5mm jack) models. They are NOT compatible with the V6 Pro+ model, which has a different clip interface and mounting mechanism.

3.2 Mounting Options

You have two primary options for attaching the intercom to your helmet:

  1. Using the Mounting Clip:

    Slide the mounting clip onto the edge of your helmet. Ensure it is securely fastened. The intercom unit then slides into this clip.

    Intercom attached to helmet using the clip
    Intercom mounted with clip.
    Intercom unit sliding onto a mounting clip
    Intercom sliding onto clip.
  2. Using the Double-Sided Adhesive Base:

    Peel off the protective backing from the double-sided adhesive base and firmly press it onto a clean, flat surface on your helmet. Allow sufficient time for the adhesive to bond before attaching the intercom unit. The intercom unit then slides into this base.

    Intercom unit attached to helmet using the adhesive base
    Intercom mounted with adhesive base.

Ensure the intercom unit is securely seated in either the clip or the adhesive base before riding.

4. Operation of the Intercom System

This section details the functions of the EJEAS V6 Pro / V4 PLUS intercom unit.

4.1 Button Functions Overview

EJEAS V6 Pro intercom unit with buttons labeled A, B, C, D, E, MOTOR, Phone, Volume +, Volume -, and Antenna.
EJEAS V6 Pro Intercom Unit with Labeled Buttons.
No. Button/Interface Function
1MOTOR/A buttonPower on / Intercom A pairing
2B buttonIntercom B pairing
3C buttonIntercom C pairing
4D buttonIntercom D pairing
5E buttonIntercom E pairing
6Phone buttonPhone functions (answer, end, redial, music play/pause)
7Volume +Increase volume / Next music
8Volume -Decrease volume / Previous music
9Power offPower off the device
10AntennaFor signal reception
11Earphone / USB charger interfaceConnect earphones / Charge device

4.2 Phone Operations

  • Power On/Off:
    • Power On: Long press the MOTOR button for approximately 2 seconds until the main device light flashes.
    • Power Off: Press the Power off button.
  • Connect with Phone (GPS/MP3):

    Long press the Phone button for 5 seconds until red and blue lights flash. Turn on Bluetooth on your phone (or GPS/MP3 device if it supports Bluetooth) and search for "V6" to connect. Upon successful pairing, the intercom's blue light will flash.

  • Last Number Redial:

    After connecting to a phone, long press the Phone button for 3 seconds. The device will automatically dial the last called number.

  • Receiving a Call:

    When a call comes in, if no operation is performed within 5 seconds, the phone will automatically answer.

  • Refuse a Call:

    When a call comes in, press the Phone button to end the call.

  • Play/Suspend Music:

    Short press the Phone button (95% compatible with cellphone music players).

  • Volume Control:
    • Add Volume: Press Volume +
    • Down Volume: Press Volume -
  • Choose Music:
    • Previous Music: Long press Volume - for 2 seconds.
    • Next Music: Long press Volume + for 2 seconds.
  • Charging Tip:

    When charging, the red light will be continuously on. After a full charge, the red light will turn off.

4.3 Intercom Operations

The V6 system supports up to six riders, with two riders able to talk simultaneously. One main device can be paired with five sub-devices. The main device can select one sub-device to communicate with at a time.

Important: The main device cannot communicate with all five sub-devices simultaneously. It can only choose one sub-device to talk to at any given moment. The other five sub-devices cannot communicate with each other directly.

4.3.1 Pairing with Sub-Devices (A, B, C, D, E)

Diagram showing a main intercom unit connected to five sub-intercom units labeled A, B, C, D, E.
Main intercom unit pairing with sub-devices.
  • Pairing with Device A:

    Long press the MOTOR button on the main device and the A device simultaneously for about 5 seconds. Both devices' red and blue lights will flash. Once they find each other, one device will automatically initiate a pairing connection, and the blue light will flash quickly. After a short period, both blue lights will flash slowly, indicating successful pairing and normal communication. To pair the next sub-device, first press the MOTOR button to disconnect the current pairing.

  • Pairing with Device B:

    Long press the B button on the main device and the B device simultaneously for about 5 seconds. Both devices' red and blue lights will flash. Similar to Device A pairing, a connection will be established, and blue lights will flash slowly upon success. To pair the next sub-device, first press the B button to disconnect.

  • Pairing with Devices C, D, and E:

    Follow the same pairing procedure as above, using the corresponding C, D, or E button on the main device and the respective sub-device.

Note: Once paired, you do not need to pair again for subsequent uses. Simply click the corresponding MOTOR/B/C/D/E button on the main device to connect and talk.

5. EUC Remote Controller (Optional)

If you have an optional EUC Remote Controller, refer to the following instructions for its use and pairing.

5.1 EUC Buttons Introduction

Diagram of EUC Remote Controller with labeled buttons for Volume, Phone, and Intercom A, B, C.
EUC Remote Controller Button Layout (Example Intercom Unit shown for context).
Button Action Function
Volume -Short pressVolume -
Long pressPrevious song (when music is playing)
Double clickNone
Phone ButtonShort pressAnswer call / Hang up / Music play/pause / Connect last connected phone
Long pressCall rejection / Voice assistant
Double clickLast number redial
Volume +Short pressVolume +
Long pressNext song (when music is playing)
Double clickNone
Button AShort pressIntercom A pairing
Long pressDisconnecting the intercom
Double clickIntercom D pairing
Button BShort pressIntercom B pairing
Long pressDisconnecting the intercom
Double clickIntercom E pairing
Button CShort pressIntercom C pairing
Long pressDisconnecting the intercom
Volume - + Button FMSuper Long PressClear EUC handle pairing records

5.2 EUC Pairing

  1. Clear Existing Pairing Records:

    Long press both the <Button FM> and <Volume -> buttons on the EUC for 5 seconds to clear any previous pairing records. Both red and blue lights will be on simultaneously.

  2. Enter Handle Pairing Mode:

    Long press both the <Phone Button> and <Button E> buttons on the EUC for 5 seconds. The red and blue lights will flash alternately and quickly, indicating it's in pairing mode.

  3. Connect:

    Click any button on the EUC to initiate connection with the intercom. If the EUC is not successfully paired within 2 minutes, it will automatically exit pairing mode.

6. Mobile App

The EJEAS SafeRiding mobile application provides enhanced control and features for your intercom system.

6.1 Installation and Connection

  1. Download and Install:

    Download and install the SafeRiding mobile APP for the first time. Scan the QR codes below or search for "SafeRiding" in your app store.

    iOS App QR Code
    iOS
    Android App QR Code
    Android

    (Note: Generic QR code image used as specific app QR codes were not provided. Please refer to the official EJEAS website or app store for correct QR codes.)

  2. Prepare Intercom for App Connection:

    Press and hold the <Phone Button> on the intercom for approximately 5 seconds until the red and blue lights flash alternately and quickly.

  3. Connect via App:

    Open the SafeRiding APP. Click on the Bluetooth icon in the top right corner. The interface will show the name of the searched intercom device. Select the intercom device to be connected and click to connect.

    (For iOS systems, you may need to re-enter phone pairing in system settings -> Bluetooth to connect audio Bluetooth.)

  4. Subsequent Connections:

    The next time you use the app, simply open it, click the Bluetooth icon in the top right corner, and select your intercom from the paired devices list for connection.

6.2 App Functions

The SafeRiding APP provides various functions including intercom group management, music control, FM control, device switch off, authenticity checks, and other features.

7. Precautions for Use

  • Installation: Please install correctly. When riding in rainy conditions, ensure the headphone jack is fully inserted into the device to prevent water ingress.
  • Charging: To ensure optimal battery life, always use the standard charger provided or recommended by the manufacturer.
  • Riding Safety: For your safety, it is not recommended to listen to music while riding.
  • Device Operation While Riding: Do not manually operate the device buttons while riding. Pay full attention to safety.
  • Communication Distance: To achieve the best communication distance, it is recommended to use the intercom in open areas.

8. Specifications

Attribute Value
Brand NameXINOWY (Accessories) / EJEAS (Intercom System)
Model Namefor EJEAS V6 Pro/3.5mm V4 PLUS
Item TypeHelmet Bluetooth headset accessories (Mounting Clip/Base)
Maximum Intercom Distance<500m (Intercom system spec, up to 800m in open areas)
Maximum Number of Speakers2 (simultaneously, from 6 paired)
Bluetooth Headset Range10 meters
External Testing CertificationCE
CertificationCE
OriginMainland China
Item Weight10g (approximate for accessories)
Item Height2cm (approximate for accessories)
Item Width2cm (approximate for accessories)
Item Length3cm (approximate for accessories)

Note: Some specifications like "Maximum Intercom Distance" refer to the intercom unit itself, not the mounting accessories.

8.1 Compliance Information

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's license-exempt RSS(s). Operation is subject to the following two conditions:

  1. This device may not cause interference.
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

9. Troubleshooting

9.1 Clear Pairing (Restore Factory Settings for Intercom)

If you experience pairing issues or wish to reset the intercom's pairing records:

  • Press the Phone button and B button simultaneously.
  • The indicator light will flash red three times and then blue once. This indicates that the pairing records have been cleared.

9.2 Restore Default Settings (for EUC Remote Controller)

To clear pairing records for the optional EUC Remote Controller:

  • Press and hold both the <B button> and <Phone button> on the EUC for about 2 seconds.
  • The red light will flash 3 times quickly to delete the pairing record. The intercom will then automatically power on again. You will hear "Di, Di, Di".

10. User Tips

  • Mounting Choice: Many users appreciate the flexibility of attaching the intercom without a helmet clip, opting for the adhesive base for a cleaner look or when a clip isn't suitable for their helmet design. Consider which mounting method best suits your helmet and riding style.
  • Spare Parts: These mounting accessories are excellent as spare parts or replacements for lost or damaged original components.
  • Full Manual: For a complete understanding of your EJEAS V6 Pro / V4 PLUS intercom system, please refer to the full user manual available in PDF format: EJEAS V6pro User Manual (PDF).

11. Warranty and Support

For any issues, technical support, or warranty claims regarding your EJEAS V6 Pro / V4 PLUS intercom system or these mounting accessories, please contact the seller or the official EJEAS support channels. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.