QCY MeloBuds Pro

Contents

QCY MeloBuds Pro Adaptive ANC Earbuds

User Manual

1. Introduction

Thank you for choosing QCY MeloBuds Pro Adaptive ANC Earbuds. These truly wireless earbuds are designed to provide an immersive audio experience with advanced features such as 46dB Hybrid Active Noise Cancellation (ANC), Hi-Res Audio with LDAC codec, multipoint connection, and crystal-clear calls. This manual will guide you through the setup, operation, and maintenance of your new earbuds.

For the best experience and access to advanced features like EQ tuning and firmware updates, please download the official QCY app.

2. Package Contents

Your QCY MeloBuds Pro package includes:

  • User Manual
  • Charging Case
  • Charging Cable (Type-C)
  • Eartips (various sizes)

3. Product Overview

Earbud Components

  • Sound Hole
  • LED Indicator
  • Touch Panel
  • Microphone Hole
  • Pogo Pins (Charging Contacts)

Charging Case Components

  • Charging Contacts
  • Type-C Charging Port
  • Indicator Light
  • Charging Case Button
QCY MeloBuds Pro earbuds and charging case
QCY MeloBuds Pro Earbuds and Charging Case
Diagram illustrating Adaptive Active Noise Cancellation (ANC) at -46dB and Transparency Mode
Adaptive Active Noise Cancellation (-46dB) and Transparency Mode
Diagram showing Hi-res Audio with LDAC, 12mm drivers, and 3x data transmission compared to SBC
Hi-Res Audio with LDAC Technology
Image depicting Dual Transparency Mode with 6-level transparency and Vocal Enhance mode
Dual Transparency Mode for situational awareness
Image showing Multipoint Connection and In-ear Detection with Bluetooth 5.3, connecting to a phone and tablet
Multipoint Connection and In-ear Detection
Infographic on 34 Hours Playtime and Quick Charge capabilities
Extended Playtime and Quick Charge Feature
Official product video showcasing key features and design.

4. Setup

Initial Pairing

  1. Take both earbuds out of the charging case. Remove the isolation film from the charging contacts on each earbud.
  2. Place both earbuds back into the charging case and close the lid. This step activates the new device.
  3. Open the charging case lid again and retrieve the earbuds.
  4. On your smartphone or Bluetooth device, refresh the Bluetooth device list and select "QCY MeloBuds Pro" to complete the pairing.
  5. If the earbuds do not automatically power on when opening the case, please charge them and try again.

One-Click Device Switching

To switch between previously paired devices (e.g., from Device A to Device B):

  1. With both earbuds in the charging case and the lid open, press and hold the charging case button for approximately 3 seconds.
  2. The earbuds will flash white once.
  3. On your desired device (Device B), search for the earbuds and click to connect.

Multi-Device Connection (Connect to two devices simultaneously)

This feature allows the earbuds to be connected to two devices at the same time. This function needs to be enabled in the QCY APP settings.

  1. Power on the earbuds to initiate pairing. After connecting to Device A, turn off Bluetooth on Device A. The earbuds will re-enter pairing mode.
  2. On Device B, enable Bluetooth and select "QCY MeloBuds Pro" for pairing.
  3. On Device A, turn on Bluetooth and click the paired earbuds name. The earbuds are now connected to both devices simultaneously.

Note: The one-drag-two function and LDAC audio decoding format cannot be enabled simultaneously.

Factory Reset (Clearing Pairing Records)

This method is useful if you encounter connection issues.

  1. Place both earbuds in the charging case and open the lid.
  2. Press and hold the charging case button for 10 seconds.
  3. The earbuds will flash red 5 times, indicating the reset is complete after the blinking stops.
  4. After the factory reset, follow the initial pairing method to connect for normal usage.

5. Operation

Wearing the Earbuds

  1. Properly wear the earbuds on both the left and right sides.
  2. After wearing them, you can make slight adjustments by rotating them to find a comfortable and secure position.
  3. Ensure the microphone opening is facing downward towards your mouth.

Incorrect earbud placement may affect call quality and hearing. If the fit is not snug enough, the ANC effectiveness may decrease. Try adjusting the wearing angle and direction before reactivating the adaptive noise cancellation mode.

Touch Controls

  • **Power On**: Open the charging case (if earbuds are inside) or long-press the touch panel for 1.5 seconds (if earbuds are outside).
  • **Power Off**: Place the earbuds into the charging case and close the lid.
  • **Answer/End Call**: Double-tap the touch panel.
  • **Reject Call**: Long-press the touch panel for 1.5 seconds.
  • **Play/Pause**: Double-tap the touch panel.
  • **Next Track**: Triple-tap the touch panel of the right earbud.
  • **Voice Assistant**: Triple-tap the touch panel of the left earbud.
  • **Low Latency Mode**: Long-press the touch panel of the left earbud for 1.5 seconds.
  • **Adaptive ANC/Normal Mode/Transparency Mode**: Long-press the touch panel of the right earbud for 1.5 seconds to cycle through these modes.

Note: LDAC is activated by default. If you need to disable it, please do so via the QCY app.

Charging

  • **Earbuds Charging**: While charging, the red light on the earbuds stays on and turns off when fully charged.
  • **Charging Case Charging**: During charging, the red light on the case stays on. When fully charged, the white light stays on.
  • **Charging Case Battery Status**:
    • Sufficient Battery: When the charging case is opened, the white light will stay on for 5 seconds before turning off.
    • Low Battery: When the charging case is opened, the red light will stay on for 5 seconds before turning off.

6. Specifications

FeatureSpecification
Brand NameQCY
ModelMeloBuds Pro (also referred to as HT08)
MaterialPVC, ABS
Battery Capacity (Earbuds)350mAh (Charging Case capacity not specified, but provides 34 hours total playtime)
Battery Life (Single Charge)Up to 8.5 hours
Total Playtime (with Charging Case)Up to 34 hours
Quick Charge10 minutes charge = 1 hour audio playback
Voice Assistant Built-inYes
Maximum Wireless Range10m-20m
NFC TechnologyNo
Sound IsolatingYes
Earcups TypeSealed
Number Of Drivers6
Charging MethodCharging case
Driver Diameter12mm
Bluetooth Version5.3
FeaturesWaterproof, Active Noise Cancelling, Dual Connection (Multipoint)
CodecsLDAC
With MicrophoneYes (6 ENC Mics with AI)
Is WirelessYes
Support APPYes
Waterproof RatingYes (IPX5 - from product description images)
Line Length0m (True Wireless)
FunctionFor Video Game, Common Headphone, For Mobile Phone, HiFi Headphone, Sport, For Outdoor, For Office
Active Noise-CancellationYes (Hybrid ANC up to 46dB)
Volume ControlYes
Control ButtonYes (Touch Panel)
Vocalism PrincipleDynamic
Wireless TypeBluetooth
ConnectorsType-C
CommunicationTrue wireless
StyleTws in-ear headphones
CertificationCE, RoHS, BQB
OriginMainland China

7. Maintenance & Care

  • Clean the earbuds and charging case regularly with a soft, dry cloth.
  • Do not use oil or other volatile liquids to clean the product.
  • Avoid exposing the earbuds to extreme temperatures (below 0°C or above 45°C).
  • Store the earbuds in their charging case when not in use to protect them and conserve battery.
  • Ensure the charging contacts on both the earbuds and the case are clean and free from debris for proper charging.

8. Troubleshooting

Common Issues & Solutions

  • **One earbud has no sound / Earbuds not working**: Place both earbuds back in the charging case, close the lid, then re-open and retrieve them. If the issue persists, perform a factory reset.
  • **Unable to connect / Pairing issues**: Delete previous pairing records for "QCY MeloBuds Pro" from your phone's Bluetooth device list. Then, re-scan and pair. If still unable to connect, try charging the earbuds and case, then re-attempt pairing or factory reset.
  • **No sound during music playback or calls**: For Android phones, check Bluetooth settings for "QCY MeloBuds Pro" and ensure "Phone audio" and "Media audio" are enabled. If still no sound, re-pair the earbuds with your phone.
  • **Audio delay (video/games)**: Audio delay can be influenced by environmental factors, network conditions, and phone codecs. Try changing your environment or re-pairing. Activate Low Latency mode by long-pressing the left earbud's touch panel for 1.5 seconds.
  • **Audio stuttering / Disconnection**: Interference from strong Wi-Fi, 5G/4G signals, or high-power electrical appliances in the vicinity can cause this. Try moving to a different environment or re-pairing the earbuds.
  • **Active Noise Cancellation (ANC) not effective**: Ensure the earbuds are worn correctly and fit snugly in your ears. Adjust the wearing angle and direction, then reactivate the adaptive ANC mode. Experiment with different ear tip sizes for a better seal.
  • **Microphone volume is low / Unclear calls**: Ensure the microphone hole is facing downwards towards your mouth. Microphone quality may vary depending on the environment. If volume is consistently low, check your phone's audio settings or re-pair the earbuds.
  • **LDAC not working with iPhone**: LDAC is not compatible with iOS devices.

9. User Tips

  • **Optimal Fit**: Experiment with the included ear tip sizes to find the most comfortable and secure fit. A good seal is crucial for effective Active Noise Cancellation (ANC) and sound quality.
  • **Charging Case Click**: When placing earbuds into the charging case, ensure they "click" into place to guarantee proper charging contact.
  • **QCY App Customization**: Download the official QCY app to customize touch controls, adjust EQ settings, switch between ANC/Transparency modes, and access other advanced features for a personalized experience.
  • **Microphone Performance**: While the microphone is generally good for calls, some users report it might not be the strongest feature. For important calls, ensure you are in a quiet environment.
  • **Authenticity Check**: To verify the originality of your QCY MeloBuds Pro, check for a QR code on the box and use the QCY app for full functionality and updates.

10. Safety Precautions

  • Please read and retain this user manual carefully before using the product.
  • Fully charge the product before first use.
  • If the product is not used for an extended period (more than 2 weeks), please recharge it.
  • Use only chargers produced by a legitimate manufacturer and certified by national safety authorities.
  • Do not disassemble or modify the battery, insert foreign objects, expose it to high temperatures, or immerse it in water or other liquids to prevent battery leakage, overheating, ignition, or explosion. Battery replacement should only be done by the manufacturer.
  • Do not drop, crush, or puncture the battery. Avoid external pressure that may lead to internal short circuits and overheating.
  • Do not dismantle or modify the earbuds for any reason, as it may result in fire, electronic breakdown, or permanent damage to the product.
  • Do not expose the product to extremely low or high temperatures (below 0°C or above 45°C).
  • Do not point the product indicator light near the eyes of children or animals.
  • Do not use the product during thunderstorms, as it may cause abnormal operation and increase the risk of electric shock.
  • Do not use oil or other volatile liquids to clean the product.
  • Avoid using this device for long periods at high volume, as there is a risk of hearing damage.

11. Warranty & Support

Warranty Policy

Your QCY product purchase is covered by a one-year limited manufacturer warranty from the date of delivery. Please retain your purchase receipt. If any defects occur due to quality issues within the warranty period, please bring both the warranty card and the purchase receipt to the authorized dealer for complimentary replacement services.

  • Within 7 days of purchase: Repair, replacement, or return service.
  • Within 15 days of purchase: Repair or replacement service.
  • Within 12 months of purchase: Repair service.

Warranty Exclusions

The manufacturer's warranty is void under the following circumstances (but not limited to):

  • Improper or inadequate maintenance or modification.
  • Accident, misuse, abuse, contamination, or other external causes.
  • Use of unspecified adapter and accessories.
  • Malfunctions or damages resulting from natural disasters (e.g., earthquakes, lightning), abnormal voltage, or environmental factors.
  • Damages that occur as a result of failure to follow the instructions in this manual.

Contact Information

Manufacturer: Dongguan Hele Electronics Co., Ltd.

Address: No. 325 Yuehui Rd. Daojiao Town Dongguan City, Guangdong Province, China

Customer Service Phone: 4008-306-708

Website: www.qcy.com

12. Environmental Information

Hazardous Substances Table

This table is prepared in accordance with SJ/T 11364 regulations.

Part NameLead (Pb)Mercury (Hg)Cadmium (Cd)Hexavalent Chromium (Cr(VI))Polybrominated Biphenyls (PBB)Polybrominated Diphenyl Ethers (PBDE)
Outer CasingOOOOOO
Circuit Board ComponentsXOOOOO
BatteryOOOOOO
Charging CableOOOOOO
AccessoriesOOOOOO

O: Indicates that this hazardous substance in all homogeneous materials of this part is below the limit requirements specified in GB/T 26572.

X: Indicates that this hazardous substance in at least one homogeneous material of this part exceeds the limit requirements specified in GB/T 26572.

Environmental Protection Use Period

Under normal operating conditions, the environmental protection use period for this product is 10 years. During this period, the product will not leak any hazardous substances and can be recycled in accordance with local regulations.

CE and RoHS logosWEEE symbol indicating separate collection of electrical and electronic equipment

This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.