1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your GMAIPOP 1080P WIFI Dual Camera Dash Cam. Please read this manual thoroughly before using the product to ensure proper function and safety.
2. Important Safety Information
- SD Card: A 32GB SD card is included. Ensure the SD card is inserted in the correct direction as shown in the figure.
- Battery & Charger: The built-in 150mAh battery is for saving settings only. The dash cam requires constant power from the car charger or USB connection to operate. If power is interrupted, the unit will shut down. Always use the original car charger to prevent faults or incompatibility.
- High Temperature Cautions: Do not leave the product in temperatures exceeding 70°C (160°F) for extended periods. When using a sunshade, avoid placing the dash cam between the windshield and sunshade to prevent heat damage.
- Reset Function: If the dash cam freezes, gets stuck, or encounters a format error, press the reset hole with a tool to restart the device.
3. Product Overview
Familiarize yourself with the components and controls of your dash cam.

Components:
- Power/OK Button
- Down Button
- Up Button
- Menu Button
- Reset Hole
- AV-IN Port
- TF Card Slot
- Mini USB Power Interface
4. Button Functions
| Button | Function |
|---|---|
| Power/OK | Long-Press (2-3s): Turn ON/OFF the camera. Short-Press: Start/stop video recording; Play/pause current video in Playback Status; Enter/save settings in Menu. |
| Down | Short-Press: Scroll DOWN in Menu; Switch display windows (front/cabin camera) in recording status; Scroll to next video files in Playback Status. Long-Press: Turn ON/OFF Dash Cam WiFi. |
| Up | Short-Press: Scroll UP in Menu; Mute Audio Recording (when recording). Long-Press: Enter file management. |
| Menu | Long-Press (Non-Recording): Enter/Exit Menu. |
| Reset Hole | Reset the Dash Cam. |
| AV-IN Hole | Connect with cabin camera. |
| TF Card Slot | Insert Micro SD card. |
| Power Slot | Mini USB Power Interface. |
5. Installation
Step 1: Install Electrostatic Film
- Clean the windshield glass thoroughly using the provided accessories. This is crucial for proper adhesion. If the glass is dirty, the bracket may easily detach.
- Peel off the cover marked with "1" in red from the electrostatic film.
- Carefully apply the electrostatic film to the cleaned windshield glass.
- Once the film is in place, peel off the remaining cover marked with "2" in green.



Step 2: Install the Bracket
Remove the protective film from the bracket cover, then firmly attach the bracket onto the electrostatic film.
Step 3: Connect Car Charger and Route Cable
- Connect the car charger to the camera's Mini USB power port.
- Route the power cable carefully to avoid interference with driving or vehicle safety features.




Important Notes for Cable Routing:
- If your vehicle has side curtain airbags, exercise extreme caution when routing cables along windows. Ensure cables do not pass any airbags, as this can prevent them from deploying.
- Ensure the cigarette lighter socket is clean for a secure connection.
- Check if the car charger's red indicator light is on to confirm power supply.


6. Operating Instructions
6.1 Using WiFi & App
- Download the App: Search for "Viidure" in Google Play Store or Apple App Store, or scan the QR code below to download the free app.

- Turn on the D50's WiFi:
Method 1: Long-Press the UP button while the dash cam is in working status.
Method 2: Go to the Menu settings, long-press the MENU button, then use UP and DOWN buttons to find the "WiFi&APP" option and turn it on. - Connecting WiFi: On your mobile phone, go to WiFi settings and search for the network named "D50 ******". Enter the default password "12345678" to connect. Note: Connect via WLAN, not Bluetooth.

- Operate the App: Once connected via WiFi, open the app to view real-time video, download footage, and adjust camera settings. When the app is connected and operating, the dash cam buttons cannot be used.

6.2 Playback Videos
There are three methods to playback recorded videos:
- Playback on PC: Remove the SD card from the dash cam and insert it into a card reader connected to your computer. You can then play the video files directly on your PC.
- Download via WiFi: Connect your phone to the dash cam's WiFi and use the "Viidure" app to download video files directly to your phone (refer to Section 6.1).
- Playback on Dash Cam:
- Long-Press the DOWN button to enter Playback Mode.
- Use the UP and DOWN buttons to scroll through and select video files.
- Long-Press the MENU button to delete or protect the current file.
- Short-Press the DOWN button to exit Playback Mode.
7. Specifications
| Feature | Specification |
|---|---|
| Brand Name | GMAIPOP |
| Item Type | Car DVR |
| Assembly Mode | Portable Recorder |
| Camera Resolution | 1920x1080 |
| Pixels | 200Mega |
| Number Of Lenses | 2 |
| View Angle | 170° |
| Aperture | F2.0 |
| Video Code | H.264 |
| Frames Per Second | 30 |
| Maximum Video Frame Rate | 30 |
| Display | IPS |
| Screen Ratio | 16:9 |
| Built-in Screen | Yes |
| Touch Screen | No |
| Imaging Sensor | AR0330 |
| Special Features | G-Sensor, Motion Detection, Real Time Surveillance, WiFi Function, 3D DNR, NightShot Function, Loop-Cycle Recording Feature, Audio Recorded |
| Max External Memory | 64G |
| Memory Card Required Reading Speed | Class 10 |
| Data Storage Capacity | 64G |
| Power Source | Corded Electric |
| Battery | Built-in (150mAh) |
| Battery Life | The battery is not powered, the camera needs to be plugged in! |
| Is Batteries Included | Yes |
| Cable Length | 3.5m |
| Weight | 0.35kg |
| Dimensions (W x H x D) | as show |
| OSD Language | Arabic, Chinese (Simplified), Chinese (Traditional), English, French, German, Hebrew, Italian, Japanese, Korean, Polish, Portuguese, Russian, Spanish, Turkish |
| Interface | AV-In, Wi-Fi, Micro SD/TF |
| Certification | CE, FCC |
| Origin | Mainland China |
8. Maintenance
- Keep the dash cam clean by wiping it with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.
- Regularly check the SD card for errors and format it periodically (e.g., once a month) to ensure optimal performance and prevent data corruption. Back up important footage before formatting.
- Ensure the power cable and connections are secure and free from damage.
- Store the dash cam in a cool, dry place when not in use, especially if removing it from the vehicle for extended periods.
9. Troubleshooting
- Dash Cam Freezes/Stucks/Format Error: Use a tool to press the reset hole.
- WiFi Keeps Disconnecting:
- Ensure your phone's settings allow connections to the dash cam's WiFi hotspot.
- Check for other strong auto-WiFi connections (e.g., wireless CarPlay) that might be kicking out the dash cam's WiFi.
- Solution: Forget the dash cam's WiFi network on your phone and reconnect. Ensure your phone's WiFi settings are correct. If strong auto-WiFi is present, turn it off when using the dash cam's WiFi.
- SD Card Not Recognized: Ensure you are using a high-quality Class 10 Micro SD card. Format the card to FAT32 before use.
- Dash Cam Not Recording When Car is Off: The dash cam requires constant power. It typically stops recording when the car engine is off. Parking mode functionality may require additional wiring or an external power source.
- Screen Turns Off Automatically: The screen can be configured to turn off after a period of inactivity or via settings to avoid distraction while driving.
- No USB Output for Power Cable: The device uses a proprietary car charger. While some users have modified cables, it is designed to work with the included car charger.
- Interior Camera Angle Limited: The interior camera's angle may be fixed. Adjust the dash cam's overall position during installation to optimize interior coverage.
10. User Tips
- The WiFi feature is highly convenient for downloading recorded videos directly to your smartphone.
- Consider using a power bank for initial setup and configuration before permanent installation in your car. This can simplify the process.
- Take your time routing the power cable to ensure it is neatly hidden and does not interfere with vehicle operation or safety. The provided cable is long enough for most installations.
- The dash cam's WiFi connection automatically updates the camera's time, ensuring accurate timestamps on your recordings.
- The infrared night vision is effective for clear interior recording even in low-light or dark conditions.
- While video download to your phone can take a minute or two, the quality is generally good for documentation purposes.
11. Warranty and Support
For detailed warranty information, technical support, and further assistance, please refer to the official user manual PDF provided by the manufacturer. You can access the PDF manual here.