Ritesdepot 85mm LED Module

Contents

Ritesdepot 85mm LED Module User Manual

Rechargeable Night Light / Furniture Mood Light

1. Product Overview

This 85mm diameter LED module is a wireless, rechargeable mood light with RF remote control. It features RGBW color changing, dimmable brightness, and a portable design. It is ideal for bedroom night lights, furniture ambient lighting, party decorations, or any space needing customizable mood lighting.

Ritesdepot 85mm LED Module emitting green light with its remote control on a wooden surface.
The Ritesdepot 85mm LED Module and its remote control.

2. Package Contents

Verify that all the following items are included in your package:

  • 1 x LED Light Module (85mm diameter)
  • 1 x 24-Key RF Remote Controller
  • 1 x USB Charging Cable

3. Technical Specifications

Parameter Specification
Diameter 85mm
Power Source Built-in rechargeable battery (USB charging)
Battery Life Up to 8-15 hours (depending on brightness/color mode)
Charging Time 2-3 hours (full charge)
Light Color RGBW (16 million colors + warm white)
Control Range Up to 10 meters (30ft, no line of sight required)
Working Temperature -10°C ~ 45°C
Waterproof Level IP20 (Indoor use only)
Luminous Flux <60
Certification CE
Item Type LED Modules
High-concerned chemical None

4. Safety Precautions

WARNING: Risk of electric shock or fire hazard.

  • Do not submerge in water - this unit is not waterproof.
  • Use only with a 5V USB power adapter (not included). Do not connect to 12V car power directly.
  • Do not disassemble the unit. Opening will void the warranty and risk electric shock.
  • Keep away from children under 3 years (small parts/choking hazard).
  • Dispose of properly - do not burn or incinerate the battery.

5. Setup and Charging Instructions

5.1. Initial Setup

Before first use, ensure the LED module is fully charged.

Bottom view of the Ritesdepot LED module showing the ON/OFF switch and micro-USB charging port, with the remote control nearby.
Locate the ON/OFF switch and charging port on the base.

5.2. Charging Instructions

  1. Locate the micro-USB charging port on the base of the light module.
  2. Connect the included USB cable to a 5V USB adapter (e.g., phone charger or laptop).
  3. The light will indicate charging status: a red light signifies charging, and a green light indicates a full charge.
  4. Unplug the unit once fully charged for wireless use.

Note: The charging time is approximately 2-3 hours for a full charge.

6. Operating Instructions

6.1. Remote Control Operations (24-Key RF)

The remote controls all functions without needing line of sight to the light. Ensure you remove the clear plastic paper from the remote's battery compartment before first use.

Diagram of the 24-key remote control with labels for Power OFF, Power ON, Static Brightness controls, Dynamic Speed controls, 16 Preset Colors in Static Mode, and Dynamic Modes including Flash, Strobe, Fade, and Smooth. It also indicates to remove the clear plastic piece before using.
24-Key RF Remote Control Functions.
Button/Mode Function
ON/OFF Turn the light on/off
Color Selection (16 Colors) Switch to static colors (red, green, blue, white, etc.)
RGB Mix Create custom colors by mixing RGB
Brightness +/- Adjust light intensity (10 levels: 10% - 100%)
Speed +/- Adjust the speed of fading/flashing effects
Flash/Strobe Rapid color changing or flashing mode
Fade/Gradient Smooth transition between colors
Warm White Switch to constant warm white light (normal night light mode)
Timer Set auto-off time (1H/2H/4H/8H)
Memory Save your current color/brightness settings

6.2. Pairing/Re-pairing Guide

If the remote control stops responding to the light module:

  1. Turn the light on using the power button on its base.
  2. Press and hold the "Pair" button (usually the "Dimmer +" or a specific key) on the remote for 3-5 seconds.
  3. The light will flash briefly to confirm successful pairing.

7. Troubleshooting

Issue Possible Cause Solution
Light won't turn on
  • Battery is dead
  • Remote battery is low
  • Charge the LED module fully
  • Replace remote battery (CR2025/CR2032)
Remote not working
  • Remote not paired
  • Out of range
  • Ensure remote is paired (see Section 6.2)
  • Move within 10 meters of the light
Light dims quickly
  • Battery power is low
  • Brightness set too high
  • Recharge the unit
  • Lower the brightness via the remote
Colors are incorrect
  • Remote signal interference
  • Move remote closer, or re-pair the device

8. Maintenance & Care

  • Cleaning: Wipe the surface with a soft, dry cloth. Do not use abrasive cleaners or water on the electronics.
  • Storage: Store in a cool, dry place. If not in use for long periods, recharge every 3 months to preserve battery life.
  • Battery Life: Recharge when the light becomes noticeably dimmer to extend battery health.

9. Warranty & Support

  • Warranty: 12-month limited warranty against manufacturing defects.
  • Coverage: Includes replacement for faulty lights or remotes.
  • Exclusions: Damage from misuse, water exposure, or unauthorized repair is not covered.
  • Support: For assistance, contact customer service with your order number.

10. User Tips

  • For optimal battery life, avoid completely draining the battery frequently.
  • Experiment with different color modes and brightness levels to create various ambiances for different occasions.
  • When using multiple LED modules, a single remote can often control them all simultaneously, simplifying setup for larger displays.
  • Remember to remove the clear plastic tab from the remote control's battery compartment before first use to activate it.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.