VGR V-613 2-in-1 Nose & Hair Trimmer User Manual
Model: V-613
Introduction
This manual provides detailed instructions for the safe and effective use of your VGR V-613 2-in-1 Nose & Hair Trimmer. Please read this manual thoroughly before first use and keep it for future reference to ensure optimal performance and longevity of your device.

Figure 1: VGR V-613 2-in-1 Nose & Hair Trimmer
Product Components
Familiarize yourself with the parts of your trimmer for proper operation and maintenance:
- Nose trimmer head
- ON/OFF button
- Indicator light
- Charging port protection cap
- Protection cap (for nose trimmer)
- Hair trimmer head
- Cleaning brush
- Guide comb for hair trimmer (2mm/4mm)
- USB charging cable (Type-C)

Figure 2: Component Overview
Safety Warnings
- Always check the appliance for damage before use. Do not use if damaged, and replace any damaged part with an original type.
- Do not open the appliance to replace the rechargeable battery.
- This appliance is suitable for cleaning under running water and can be used in a bathtub or shower. For safety reasons, it can only be operated cordless.
- Never use compressed air, scouring pads, abrasive cleaning agents, or aggressive liquids (such as petrol or acetone) to clean the appliance.
- This trimmer has a built-in rechargeable battery. Do not throw into fire, apply heat, or charge, use, or leave in a high-temperature environment.
- The appliance should not be used on animals.
- Children aged from 8 years and above, and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge, may use this product if supervised or instructed on safe use and understanding of hazards. Children should not play with the appliance. Cleaning and maintenance should not be performed by children without adult supervision.
Setup
Unboxing
Carefully remove all items from the packaging. The package should contain:
- 1 x Trimmer body
- 1 x Nose trimmer head
- 1 x Hair trimmer head
- 1 x Guide comb (2mm/4mm)
- 1 x Protection cap (for nose trimmer)
- 1 x Cleaning brush
- 1 x USB Type-C charging cable
- 1 x Instruction manual (this document)

Figure 3: Package Contents
Charging the Trimmer
Before first use, fully charge the trimmer. The trimmer has a built-in 500 mAh rechargeable Li-ion battery.
- Locate the charging port protection cap at the bottom of the trimmer. Rotate it counter-clockwise to open.
- Insert the USB Type-C charging cable into the trimmer's charging port.
- Connect the other end of the USB cable to a power source (e.g., power bank, USB adapter 5V=1A, or computer USB port).
- The indicator light will illuminate during charging.
- A full charge takes approximately 1.5 hours and provides about 150 minutes of cordless runtime.
- After charging, remove the cable and securely close the charging port protection cap by rotating it clockwise to ensure waterproof integrity.

Figure 4: Charging Options and Times
Attaching/Detaching Trimmer Heads
Always switch off the product before attaching or removing accessories.
- To remove a trimmer head: Gently twist the head counter-clockwise and pull it upwards to detach.
- To attach a trimmer head: Align the desired head with the trimmer body, push it down gently, and then twist clockwise until it locks into place.
Operating Instructions
The VGR V-613 is designed for safe, easy, and hygienic grooming above the neck.

Figure 5: Safe and Hygienic Grooming
General Operation
- To turn ON: Press the ON/OFF button once. The indicator light will illuminate.
- To turn OFF: Press the ON/OFF button again.
Video 1: Product demonstration showing assembly and operation.
Using the Nose Trimmer
Use the nose trimmer head to safely and effectively trim unwanted hair in your nose and ears.
- Ensure the nose trimmer head is securely attached.
- Remove the protection cap from the nose trimmer head.
- Turn on the trimmer.
- Gently insert the trimmer tip into your nostril or ear canal. Move it slowly in a circular motion to trim hair. Avoid inserting too deeply.
- The three-dimensional cutting head is designed to protect the nasal cavity and capture nose hair effectively.

Figure 6: Three-Dimensional Cutting Head
Using the Hair Trimmer
Use the hair trimmer head for precise trimming of eyebrows, sideburns, beard lines, and neckline.
- Ensure the hair trimmer head is securely attached.
- Turn on the trimmer.
- For even trimming, attach the guide comb (2mm/4mm) if desired.
- Gently move the trimmer against the direction of hair growth to remove unwanted hair.

Figure 7: Detail Trimmer Head with Guide

Figure 8: Grooming Areas
Maintenance
Cleaning
The VGR V-613 trimmer is IPX5 waterproof, meaning the whole body is washable for easy cleaning.

Figure 9: IPX5 Waterproof Feature
- Before cleaning, ensure the trimmer is switched off.
- Remove the cutting head (nose or hair trimmer) from the body.
- Use the provided cleaning brush to remove any trapped hairs from the blade and inside the head.
- Rinse the trimmer head under running water. You can also rinse the main body, ensuring the charging port protection cap is securely closed.
- Dry all parts thoroughly with a soft cloth before reassembling or storing.
- Do not use detergents or abrasive liquids for cleaning.
Storage
- Always store the product away from heating sources, direct sunlight, dampness, and sharp objects.
- Keep the protection cap on the nose trimmer head when not in use to protect the blades.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|
| Trimmer does not turn on | Battery is low or depleted. | Charge the trimmer for 1.5 hours. |
| Trimmer pulls hair or cuts poorly | Blades are clogged with hair. Battery is low. | Clean the trimmer head thoroughly. Charge the trimmer. |
| Indicator light not working during charge | Charging cable or power source issue. | Check cable connection and try a different USB port or adapter. |
If the problem persists, please refer to the Warranty/Support section.
Specifications
| Model Number | V-613 |
| Power Type | Rechargeable/Electric Both Work |
| Power Source | Rechargeable (USB Type-C) |
| Voltage | 110V-120V |
| Power Supply | 5V=1A |
| Battery Type | 500 mAh Li-ion battery |
| Charge Time | 1.5 Hours |
| Usage Time | 150 Minutes (continuous operation) |
| Blade Material | Stainless Steel |
| Product Material | Plastic (ABS) |
| Waterproof Rating | IPX5 |
| Certification | CE, Dot, EAC, EPA, FCC, GMP, RoHS, TGA, UL, KC, pse, weee |
User Tips
- For best results, ensure your skin is clean and dry before trimming.
- Trim hair against its growth direction for a closer cut.
- Regularly clean the trimmer heads after each use to maintain performance and hygiene.
- Keep the trimmer charged to avoid performance degradation during use.
- Always replace the protection cap on the nose trimmer head when not in use to prevent damage to the blades.
Warranty and Support
This product comes with a 12-month warranty from the date of purchase. Please retain your proof of purchase for warranty claims.
For technical support or warranty inquiries, please contact your retailer or the manufacturer's customer service. Refer to the original product packaging or seller's information for contact details.
A PDF version of this manual may be available for download from the seller's product page or by contacting support. (Reference: User Manual PDF)
The device (including its removable parts and accessories) must not be disposed of together with municipal waste at the end of its life. It must be handled in compliance with European Directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE). Please take it to a separately-collected waste disposal center for electrical and electronic appliances or return it to the retailer when purchasing a new device for the same purpose. Proper disposal helps prevent potential negative consequences for the environment and human health.