CYCPLUS M2 GPS Bike Computer User Manual

1. Introduction

The CYCPLUS M2 is a smart GPS bike computer designed to provide comprehensive cycling data. It features a large display, long battery life, and connectivity options for external sensors and popular cycling platforms.

Key Features:

• Accurate GPS Positioning: Rapid 10-second positioning in open environments.
• Long Battery Endurance: Up to 70+ hours of battery life.
• Large Display: 2.5-inch LCD screen for clear data visibility.
• Waterproof: IPX6 rating, suitable for rain (not soakable).
• Connectivity: ANT+ and Bluetooth 5.0 for external devices and app connection.
• Automatic Features: Auto backlight and auto awakening.
• Data Tracking: Records speed, cadence, heart rate, power, altitude, gradient, trip time, distance, and more.

2. Package Contents

Ensure all items are present in the package:

• CYCPLUS M2 GPS Bike Computer
• Bike Computer Mount
• Rubber Pad
• Instruction Manual
• Rubber Band x 3
• Type-C Charging Cable

3. Setup and Installation

Mounting the Bike Computer

1. Select a mounting location that does not obstruct safe riding.
2. Combine the rubber pad and bike computer mount.
3. Use two rubber bands to cross-fix the mount to the handlebar or stem. Ensure the two recessed parts of the mount are parallel to the frame.
4. Align the convex part on the back of the device with the mount, gently push, and rotate clockwise until it locks (a click sound may be heard).

Note: A CYCPLUS Z1/Z2 bike computer mount may be purchased separately for alternative mounting options.

4. Operating Instructions

4.1. Quick Start Guide (GPS Location)

For accurate satellite signal reception, ensure the device is static and used in an open, barrier-free area.

1. Turn On: Press the L1 button [▶II] briefly to turn on the device.
2. GPS Signal Acquisition: After turning on, it takes a few minutes to acquire a GPS signal. The GPS icon will appear to indicate the device is ready.
3. Start Recording: Press the L1 button [▶II] again to start recording. The recording icon will appear.
4. Save Recording Data: Long press the L2 button [◎] to save the recording data. The recording icon will disappear once data is saved.
5. Turn Off: Long press the L1 button [▶II] to turn off the device.

4.2. Current Data Display

The 2.5-inch screen displays various cycling metrics. The layout may vary slightly between new and old versions, but core data remains consistent.

4.3. Settings

To access and navigate settings:

• Enter Settings: Long press the R1 button [⇒].
• Switch Setting Pages: Press the R1 button [⇒] briefly to cycle through 8 setting pages.
• Return to Home Page: Long press the R1 button [⇒] after finishing settings.

4.4. ANT+ Sensors Connection

The device supports external ANT+ peripherals such as speed sensors, cadence sensors, heart rate monitors, and powermeters.

1. Start Search: In the ANT+ sensor setting page, press the L1 button to start searching for ANT+ sensors.
2. Connect: Once a sensor is found and connected, its data will appear on the screen. Unlinked sensor digits will flash.

4.5. Wheel Circumference Setting

Setting the correct wheel circumference is crucial for accurate speed and distance readings.

1. Start Setting: In the wheel circumference setting page, press the L1 button to start.
2. Modify Digit: Press the R1 button to change the flashing digit.
3. Switch Digit: Press the L2 button to move to the next digit.
4. Finish Setting: Press the L1 button to confirm and finish.

Refer to the User Manual (PDF) for a detailed Tire Circumference Chart (Page 36).

4.6. Time Zone Setting

1. Start Setting: In the time zone setting page, press the L1 button to start.
2. Modify Time Zone: Press the R1 button to change the time zone.
3. Finish Setting: Press the L1 button to confirm and finish.

4.7. Speed Unit Setting

1. Start Setting: In the speed unit setting page, press the L1 button to start.
2. Switch Unit: Press the R1 button to switch between KMH and MPH.
3. Finish Setting: Press the L1 button to confirm and finish.

4.8. Temperature Unit Setting

1. Start Setting: In the temperature unit setting page, press the L1 button to start.
2. Switch Unit: Press the R1 button to switch between °C and °F.
3. Finish Setting: Press the L1 button to confirm and finish.

4.9. Odograph Setting

1. Start Setting: In the odograph setting page, press the L1 button to start.
2. Modify Digit: Press the R1 button to change the flashing digit.
3. Switch Digit: Press the L2 button to move to the next digit.
4. Finish Setting: Press the L1 button to confirm and finish.

4.10. XOSS App Connection

The CYCPLUS M2 can connect to the XOSS app for data synchronization and analysis.

1. Download App: Scan the QR code provided in the manual or download the XOSS app from Google Play or the Apple App Store.
2. Register: Register an account using your email.
3. Enable Bluetooth: Turn on Bluetooth on your phone.
4. Connect: Open the XOSS app, select 'CYCPLUS M2', click 'Connect', and choose your paired computer from the found devices.

4.11. Connecting to STRAVA/Training Peaks

You can sync your cycling data from the XOSS app to STRAVA or Training Peaks.

1. Find in App: In your personal files section of the XOSS app, find 'Strava / Training Peaks' and click to connect.
2. Log In: Log in to your Strava / Training Peaks account with your credentials. (Note: Google and Facebook account logins are not supported for direct connection).
3. Sync Data: Click 'Sync' in the XOSS app. Your ride records will be synchronized to the app. If Strava is connected, the data will automatically sync to Strava.
4. View Analysis: On the exercise page, select your activity to view cycling data and analysis.

5. Maintenance

5.1. General Care

• Cleaning: Wipe the device with a soft, damp cloth. Avoid harsh chemicals.
• Water Resistance: The device is IPX6 waterproof, meaning it is rain-proof. Do not immerse it in water for extended periods.
• Storage: Store the device in a cool, dry place when not in use.

5.2. Battery and Charging

The CYCPLUS M2 features a 1100 mAh 3.7 V battery with an endurance of 70+ hours.

• Charging Mode: Type-C.
• Charging Time: Approximately 3.5 hours.
• Automatic Sleep: The device enters hibernation after 10 minutes of no displacement and no vibration. Move the device to wake it up.
• Automatic Backlight: The backlight automatically turns on between 18:00 and 9:00 the next day. You can also manually turn it on/off using the R2 button.

6. Troubleshooting

• GPS Signal Issues: Ensure the device is in an open, barrier-free area and remains static during initial signal acquisition.
• Memory Full: If memory is full, the computer will overwrite previous records chronologically. Regularly sync data to the app to avoid data loss.
• Device Unresponsive/Frozen: Try performing a factory reset.
• Factory Reset: Long press the L2 button to restore factory settings. The computer will turn off after the reset.
• App Connection Issues: Ensure your phone's Bluetooth is on and the XOSS app is updated to the latest version. Some users reported issues connecting to the CYCPLUS Fit app on iPhone but good connectivity with Android.
• Time Setting Difficulty: If you have trouble setting the time, long press the top right button (R1), then press it briefly to navigate to item S4, and then press the top left button (L1) to select your time zone.

7. Specifications

8. User Tips

• GPS Accuracy: Users report good GPS accuracy, often within 1-2 km/h compared to other GPS devices. Signal acquisition is generally fast.
• Battery Life: The long battery life is a frequently praised feature, making it suitable for extended rides.
• External Sensors: The device pairs easily with ANT+ speed and cadence sensors.
• App Compatibility: While the XOSS app is recommended, some users noted better compatibility with Android phones for the CYCPLUS Fit app compared to iPhone.
• Durability: The device is reported to withstand water and mud well, confirming its IPX6 rating.

9. Warranty and Support

9.1. Warranty

The CYCPLUS M2 GPS Bike Computer comes with a 1-year warranty for free replacement or repair from the date of purchase.

9.2. After-sales Support

For any after-sales inquiries or technical support, please contact:

Email: steven@cycplus.com

A detailed user manual in PDF format is also available for download: CYCPLUS M2 User Manual (PDF)