1. Introduction
Thank you for choosing QCY T13 ANC True Wireless Earbuds. This manual provides detailed instructions on how to set up, operate, maintain, and troubleshoot your earbuds. Please read it carefully before use and keep it for future reference.
QCY T13 ANC True Wireless Earbuds (White)
The QCY T13 ANC earbuds feature Active Noise Cancellation (ANC) to reduce ambient noise, a Transparency Mode to keep you aware of your surroundings, and crystal-clear call quality with 4-mic ENC and wind noise cancellation. They utilize Bluetooth 5.3 for stable connectivity and offer a low-latency gaming mode for a synchronized audio-video experience.
Active Noise Cancellation cuts out lower frequency noises.
Transparency Mode allows you to hear your surroundings.
Crystal Clear Call with 4 Mic ENC & Wind Noise Cancellation.
2. Package Contents
Please check the package for the following items:
- User Manual
- Charging case
- Charging Cable
- Replaceable Pads Set (Eartips)
Example of package contents (black version shown).
3. Safety Information and Caveats
To ensure safe and proper use of your QCY T13 ANC earbuds, please observe the following:
- Before using the earbuds, please read this manual carefully and keep it for future references.
- The earbuds need to be fully charged prior to first-time use.
- If the earbuds are left unused for over two weeks, please recharge them.
- Please use chargers made by qualified manufacturers.
- If earbuds fail to be found by phone, please re-turn them to connectable mode or restore factory settings. If a program error of phone occurs, please turn off and on Bluetooth function or reboot the phone.
Caveats:
- Never disassemble or modify your earbuds for any reasons to avoid any damages and danger.
- Do not store the earbuds in extreme temperatures (under 0°C or over 45°C).
- Avoid using the indicator close to the eyes of children or animals.
- Do not use the earbuds during a thunderstorm to avoid dysfunction and increasing risk of electric shock.
- Do not use harsh chemicals or strong detergents to clean the earbuds.
- Please do not use earbuds for a long time as it may damage your hearing. Arrange using time properly.
4. Setup and First Use
Overview of earbud components and setup steps.
4.1 Choosing Eartips
Medium eartips fit most people. It is recommended to start with the medium size and adjust as needed for comfort and sound quality.
Earbud components and eartip selection.
4.2 First Time Connection
- Pick up both earbuds, pop them back into the case, then close the lid to activate them.
- Open the lid, pick up the earbuds, and they will auto power on.
- On your phone, search for "QCY-T13 ANC" in the Bluetooth settings and tap to connect.
4.3 How to Switch Connection Between Two Devices (A device to B device)
Push the earbuds into the case, open the lid, and keep pressing the charging case button for approximately 3 seconds or until the LEDs on the earbuds blink white. Then pick up the earbuds. On the new device, search for "QCY-T13 ANC" and tap to connect.
Note: Earbuds cannot get connected with two phones at the same time. They will auto-reconnect to the last device in the connectivity record, if any.
4.4 Factory Reset
- Push earbuds into the case, open the lid, and keep pressing the charging case button for approximately 10 seconds to set earbuds to factory settings (LEDs on earbuds will blink red 5 times).
- After factory setting, earbuds will auto-pair with each other and turn connectable to the phone when picked up.
5. Operation
5.1 Wearing the Earbuds
- Please put on the earbuds properly, then adjust them to fit yourself.
- Set the microphone towards your mouth.
- Incorrect wearing may cause a bad calling or listening experience.
Correct earbud wearing technique.
5.2 Functions (Touch Controls)
The earbuds feature touch-sensitive controls. The QCY APP can be used for further customization.
| Function | Action |
|---|---|
| Power-on | Pick up earbuds or keep touching either panel for 2 seconds. |
| Power-off | Push earbuds into case (case must have power). |
| Answer/End Call | Double touch either earbud. |
| Ignore Call | Keep touching either panel for 1.5 seconds. |
| Skip Track Forward | Triple touch right earbud. |
| Volume Up | Touch right panel when playing music. (Function not available during calls, can be turned off/on via QCY APP) |
| Volume Down | Touch left panel when playing music. (Function not available during calls, can be turned off/on via QCY APP) |
| Voice Assistant | Triple touch left earbud. |
| Playback/Pause | Double touch left/right panel. |
| Gaming Mode | Keep pressing left touch panel for 1.5 seconds. |
| ANC Mode | Keep touching right panel for 1.5 seconds to switch among ANC, Normal, and Transparency mode. |
5.3 Charging Earbuds
Place the earbuds into the charging case. The LED on the earbuds will glow solid red when charging and turn white for 30 seconds when fully charged, then turn off.
5.4 Charging Case
Connect the charging case to a power source using the provided Type-C cable. The LED on the case will glow solid red when charging and turn solid white when fully charged.
5.5 Battery Level Indicator (Charging Case)
Press the button on the charging case to check the battery level:
- White LED: Battery level ≥ 20%
- Red LED: Battery level < 20%
6. Maintenance
- Keep the earbuds and charging case clean and dry.
- Avoid exposing the device to extreme temperatures, humidity, or corrosive environments.
- Do not use harsh chemicals or strong detergents to clean the earbuds. Use a soft, dry cloth.
- Store the earbuds in their charging case when not in use to protect them and keep them charged.
- Regularly clean the charging contacts on both the earbuds and the case to ensure proper charging.
7. Troubleshooting (FAQ)
-
Only one earbud has sound, how to solve it?
A: Put both earbuds back into the charging case, close the lid, then take them out again. Check if both earbuds have sound. If only one still has sound, please factory reset both earbuds.
-
Phone shows "connection failed", how to solve it?
A: Delete the pairing record on your phone, then search and pair again.
-
No sound when listening to music/making calls, how to solve it?
A: For Android phones, there is a settings icon on the right side of the Bluetooth connection name. Click to enter, turn off phone audio and media audio, then turn them on again. If there is still no sound, re-pair the earbuds with the phone.
-
Why is there a delay in video/games?
A: Due to the influence of the usage environment, network, mobile phone codec, and other factors, there may be different degrees of delay when the mobile phone transmits audio data to the earbuds.
-
Why does the sound stutter/disconnect?
A: If there are a large number of Wi-Fi, 5G/4G signals, high-power electrical appliances, etc. around during use, it may cause stuttering or disconnection. Try changing the environment or re-pairing to connect.
-
What are the features of these headphones?
A: Some important features of these headphones include sound isolating technology, dynamic vocalism principle, and a battery life of up to 30 hours.
-
What functions do these headphones have?
A: These headphones have voice assistant integration, wireless communication, volume control, and more.
-
What type of input does it support?
A: These headphones support Bluetooth connectivity as their primary input method.
-
What type of output does it produce?
A: It produces audio output through its dynamic drivers.
-
How do these headphones fit?
A: These headphones have an in-ear design for a secure fit.
8. Specifications
Wireless 5.3 for more powerful performance.
Gaming Mode with 68ms low latency.
| Attribute | Value |
|---|---|
| Brand Name | QCY |
| Model Name | T13 ANC |
| Material | PVC, ABS |
| Battery Capacity | 380mAh (Charging Case) |
| Battery life up to | 30 hours |
| Voice assistant built-in | Yes |
| Maximum wireless range | 10m-20m |
| NFC Technology | No |
| Sound Isolating | Yes |
| Category | Earphones & Headphones |
| Number Of Drivers | 4 |
| Charging Method | Charging case |
| Driver Diameter | 10mm |
| Bluetooth Version | 5.3 |
| Codecs | sbc |
| Is wireless | Yes |
| Support APP | Yes |
| Waterproof | Yes |
| Active Noise-Cancellation | Yes |
| Volume Control | Yes |
| Control Button | Yes |
| Vocalism Principle | Dynamic |
| Wireless Type | Bluetooth |
| Communication | Wireless |
| Style | Tws in-ear headphones |
| Certification | CE, FCC, RoHS, BQB |
| Origin | Mainland China |
9. User Tips
Based on user experiences, here are some helpful tips for your QCY T13 ANC earbuds:
- Sound Customization: Utilize the QCY app to equalize the sound and apply different audio profiles (e.g., rock, bass, hip hop, gaming mode) to suit your preferences.
- Battery Life: Users consistently praise the long battery life. Ensure regular charging, especially if unused for extended periods.
- Fit: If the included rubber eartips don't provide a good fit, consider exploring third-party options for better comfort and noise isolation. A good fit is crucial for optimal sound and ANC performance.
- Active Noise Cancellation (ANC): While effective, manage expectations; it may not completely cancel all noise at a professional level, but it significantly reduces lower frequency sounds.
- Microphone Quality: The microphone is generally considered functional but not exceptional. For critical calls, be aware of this limitation.
- App Functionality: The QCY app is useful for basic functions and sound customization, despite some users finding it basic.
10. Warranty and Support
10.1 Warranty Period
The product comes with a 12-month warranty period from the date of purchase. Please inquire with your local retailer for more details.
10.2 Free Service
If any defects caused by quality issues occur within the warranty period, please present your warranty card and purchase receipts to your distributor for free exchange or service.
Free exchange service will NOT be provided under the following circumstances:
- Damages caused by unauthorized disassembly.
- Defects or physical damages caused by leaking or dropping off.
- Damages by act of God.
If your item is within warranty and has damages or defects not listed above, please return it to us or your distributor for free repair.
10.3 Contact Information
For after-sales service, please contact customer service:
- Telephone: 4008-306-708
- Website: www.qcy.com
Manufacturer: Dongguan Hele Electronics Co., Ltd.
Address: No. 325 Yuehui Rd, Daojiao Town, Dongguan City, Guangdong Province, China.
A user manual in PDF format is also available for download: Download User Manual (PDF)
11. Regulatory Information
11.1 FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
11.2 Product Hazardous Substances Name and Content (RoHS)
This table is prepared in accordance with SJ/T 11364 regulations.
| Part Name | Lead (Pb) | Mercury (Hg) | Cadmium (Cd) | Hexavalent Chromium (Cr(VI)) | Polybrominated Biphenyls (PBB) | Polybrominated Diphenyl Ethers (PBDE) |
|---|---|---|---|---|---|---|
| Outer Casing | O | O | O | O | O | O |
| Circuit Board Components | X | O | O | O | O | O |
| Battery | O | X | O | O | O | O |
| Charging Cable | X | O | O | O | O | X |
| Accessories | O | O | O | O | O | O |
O: Indicates that the hazardous substance content in all homogeneous materials of the component is below the limit requirements specified in GB/T 26572.
X: Indicates that the hazardous substance content in at least one homogeneous material of the component exceeds the limit requirements specified in GB/T 26572.
11.3 Environmental Protection Use Period
As described in this manual, under normal use conditions, the environmental protection use period of this product is 10 years. During this period, the product will not leak any hazardous substances and can be recycled in accordance with local regulations.
CE, RoHS, and Environmental Protection Mark.