Introduction
The EJEAS Q2 is a Bluetooth 5.1 motorcycle helmet intercom system designed for clear communication and entertainment while riding. It supports real-time intercom for up to two riders, features CVC noise cancellation, IP65 waterproofing, and offers voice assistant integration. This manual provides detailed instructions for installation, operation, and maintenance of your EJEAS Q2 intercom.

Image: EJEAS Q2 Motorcycle Bluetooth Intercom highlighting Bluetooth 5.1, 2-rider talking, 800m communication, CVC noise cancellation, IP65 waterproof, voice assistant, app support, low power consumption, music control, and navigation.
Product Details
Components Overview
Familiarize yourself with the main components and controls of your EJEAS Q2 intercom system:

Image: Detailed diagram of the EJEAS Q2 intercom unit, labeling the Indicator, Antenna, Power/Phone Button, Intercom/FM Button, Volume + button, Volume - button, Type-C charging port, and Earphone interface.
- Indicator: Shows device status (pairing, connected, charging, low battery).
- Antenna: For optimal signal reception.
- Power/Phone Button: Controls power and phone call functions.
- Intercom/FM Button: Manages intercom and FM radio functions.
- Volume + Button: Increases volume.
- Volume - Button: Decreases volume.
- Type-C Port: For charging the device.
- Earphone Interface: Connects to the helmet speakers and microphone.
Mobile Application (SafeRiding APP)
The SafeRiding APP allows you to set up intercom groups, view the multi-language user guide, and access additional features. Download the app from ejeas.com/support.

Image: QR codes for downloading the SafeRiding APP for iOS and Android devices.
Setup
Charging the Device
Before initial use, fully charge the EJEAS Q2. The built-in rechargeable lithium-ion battery takes approximately 2.5 hours to fully charge using the Type-C charging cable. During charging, the indicator light will be constantly red. The red light will turn off when charging is complete.

Image: Illustration showing the 750 mAh battery capacity, 2.5 hours charging time, 30 hours music time, 24 hours intercom time, and 260 hours standby time.
Product Installation
Follow these steps to install the EJEAS Q2 on your helmet:

Image: Step-by-step visual guide for installing the intercom unit, speakers, and microphone inside a helmet. This includes attaching the mounting clip, inserting the main unit, positioning speakers, and securing the microphone.
- Step 1: Attach Mounting Bracket. Secure the mounting bracket to the side of your helmet. You can use either the adhesive tape mount or the clamp mount, depending on your helmet type.
- Step 2: Mount the Intercom Unit. Slide the EJEAS Q2 main unit onto the secured mounting bracket until it clicks into place.
- Step 3: Install Speakers. Place the speakers inside the helmet's ear pockets. Ensure they are positioned directly over your ears for optimal sound quality.
- Step 4: Position Microphone. Attach the microphone to the inside of the helmet, near your mouth. Ensure it is not obstructed and can pick up your voice clearly.
- Step 5: Connect Cables. Connect the speaker and microphone cables to the earphone interface on the EJEAS Q2 unit.
Operating Instructions
Basic Operations
The EJEAS Q2 features intuitive controls:

Image: Visual guide for button operations: single-click, double-click, long press for 5 seconds, and simultaneous click on the EJEAS Q2 control buttons.
- Power ON: Long press the Power/Phone Button for 1 second. A prompt tone will sound, and the blue light will flash slowly (standby).
- Power OFF: Press the Power/Phone Button and Intercom/FM Button simultaneously. The lights will turn off.
- Battery Level Check: With the device on, long press the Volume + or Volume - button for 3 seconds. The device will announce "Battery Level High," "Battery Level Medium," or "Battery Level Low."
Volume Control
Adjust the volume for intercom, calls, music, and FM radio:
- Increase Volume: Single-click the Volume + button.
- Decrease Volume: Single-click the Volume - button.
- When intercom and FM are used simultaneously, volume controls apply to FM.
Bluetooth Intercom
The EJEAS Q2 supports real-time intercom communication between two riders up to 800 meters apart.

Image: Two motorcyclists on a road, illustrating the 800-meter communication range for the 2-way intercom system.
Intercom Pairing
- Enter Pairing Mode: Long press the Intercom Button for 5 seconds. The red and blue lights will flash fast alternately, and the device will announce "Intercom Pairing."
- Search and Pair: The device will search for other intercoms. Once found, it will announce "Intercom Pairing Successful."
- Connect: The devices are now connected and ready for communication.
Intercom Reconnection & Disconnection
- Reconnection: When in standby, single-click the Intercom Button. The device will announce "Intercom Connected."
- Disconnection: Long press the Intercom Button for 1 second. The device will announce "Intercom Disconnected."
Compatible with Old Intercom Pairing (V4/V6)
- Enter Pairing Mode: Long press both the Volume - and Intercom Button for 5 seconds. The red and blue lights will flash fast alternately.
- Enter Bluetooth Search Mode: Click the Intercom Button. The red and blue lights will flash twice alternatively, and the device will announce "Intercom Searching."
- Connect: Once pairing is successful (blue light flashes slowly), click the Intercom Button to connect.
Pairing with Other Bluetooth Devices
This function's compatibility with all Bluetooth headsets or intercoms is not guaranteed.
- Enter Pairing Mode: Long press the Intercom Button for 5 seconds. The red and blue lights will flash fast alternately, and the device will announce "Intercom Pairing."
- Enter Bluetooth Search Mode: Click the Intercom Button. The red and blue lights will flash twice alternatively, and the device will announce "Intercom Searching."
- Other Device Pairing: Ensure the other Bluetooth device is in Bluetooth search mode.
- Successful Pairing: Once pairing is successful, the device will announce "Intercom Pairing Successful."
Phone Functions
Phone Pairing
- Enter Pairing Mode: Long press the Power/Phone Button for 5 seconds. The red and blue lights will flash fast alternately, and the device will announce "Phone Pairing." (If no phone is connected, it will exit pairing mode after 2 minutes).
- Search and Pair: On your phone, open Bluetooth settings, search for "Q2," and pair with the device.
- Successful Pairing: The blue light will flash twice slowly, and the device will announce "Pairing Successful, Connected." The current battery power will be shown on your phone (phone must support HFP).
Phone Reconnection
The EJEAS Q2 will automatically connect back to the last paired phone when powered on.
Answering Calls
Incoming calls will be auto-answered within 8 seconds if no other operation is performed. You can also single-click the Power/Phone Button to answer immediately.
Rejecting Calls
Long press the Power/Phone Button for 2 seconds to reject an incoming call.
Ending Calls
Single-click the Power/Phone Button to end an active call.
Last Call Replay
Double-click the Power/Phone Button to redial the last number.
TEL Priority
When listening to music, FM, or intercom, and receiving a phone call, the phone call will take priority. Music/FM/intercom will be interrupted and restored after the call ends.
Voice Assistant
Your phone must support and have the voice assistant (Google Assistant & Siri) enabled.

Image: A motorcyclist activating the voice assistant by long-pressing the Power/Phone button for 1 second, with examples of commands like "Hey, Siri," "Play the music," "Call Jessie," and "Open the Google Map."
- Activate Voice Assistant: Long press the Power/Phone Button for 1 second.
Music Control
- Play/Pause: Single-click the Power/Phone Button.
- Next Track: Double-click the Volume + button.
- Previous Track: Double-click the Volume - button.
FM Radio
The EJEAS Q2 includes an FM radio (76-108MHz). Intercom and radio can work simultaneously.
- FM ON: Double-click the Intercom/FM Button. The blue light will be constantly on for 4 seconds, then the red light will double flash quickly. The device will announce "FM Radio."
- FM OFF: Double-click the Intercom/FM Button. The device will announce "FM Radio Off."
- Frequency Switching: Long press the Volume + button for 2 seconds to increase frequency. Long press the Volume - button for 2 seconds to decrease frequency.
EUC Remote Control (Optional)
The EJEAS Q2 supports an optional EUC Remote Control for convenient operation.
EUC Details

Image: Diagram of the EUC Remote Control, labeling buttons for FM, Useless Button (A, B, C), Intercom Button, Volume +, Phone, and Volume -.
EUC Pairing
- Clear Pairing Record: Long press both the FM Button and Volume - on the EUC for 5 seconds. The red and blue lights will consistently be on.
- Enter Pairing Mode: Long press both the Phone Button and Volume - on the EJEAS Q2 for 5 seconds. The red and blue lights will flash alternately and quickly, indicating "Remote Control Pairing."
- Connect: Click any key on the EUC. Pairing is successful when the device announces "Pairing Successful." (If EUC cannot be successfully paired in 2 minutes, it will automatically exit pairing mode.)
EUC FM ON/OFF
- Open FM: Click the FM Button on the EUC.
- Close FM: Click the FM Button on the EUC again.
Maintenance
Waterproof Design
The EJEAS Q2 features an IP65 waterproof design, meaning it is protected against dust and low-pressure water jets from any direction. This allows for free use in rainy conditions.

Image: The EJEAS Q2 intercom unit shown with water splashing on it, illustrating its IP65 waterproof design for use in drizzling or dusty conditions.
General Care
- Keep the device dry. Do not expose it to extreme temperatures.
- Clean the device gently with a soft, damp cloth. Avoid harsh chemicals.
- Ensure the Type-C port cover is securely closed when not charging to maintain water resistance.
Troubleshooting
Factory Reset
If you experience persistent issues, a factory reset may resolve them:
- Perform Reset: Long press the Volume +, Volume -, and Power/Phone Button for 5 seconds simultaneously.
- The red and blue lights will quickly flash four times simultaneously, and the device will announce "Restore Default Setting."
FCC Compliance Note
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Specifications
| Feature | Specification |
|---|---|
| Brand Name | EJEAS |
| Model Name | Q2/Quick2 |
| Item Type | Helmet Headset |
| Bluetooth Version | 5.1 (Qualcomm Chip) |
| Maximum Intercom Distance | 500-1000m (typically 800m for 2 riders) |
| Maximum Number of Speakers | 2 |
| Special Features | Universal Pairing Function, With Remote Control (optional), Waterproof, Noise Reduction (CVC), Quick Pair, Voice Assistant |
| Waterproof Rating | IP65 |
| Battery Capacity | 750 mAh |
| Charging Time | Approx. 2.5 hours |
| Music Time | Up to 30 hours |
| Intercom Time | Up to 24 hours |
| Standby Time | Up to 260 hours |
| Power Supply Mode | Built-in Battery |
| Connection Mode | Wire, Bluetooth |
| Applicable Helmet Type | MODULAR, MOTOCROSS, Open face, Full Face, Flip Up Helmet, Universal |
| Item Weight | 28g |
| Item Dimensions (L x W x H) | 16cm x 11cm x 7cm |
| Certifications | CE, FCC |
User Tips
- Speaker Placement: For optimal sound quality, ensure the speakers are positioned directly over your ears inside the helmet. Some users found it necessary to adjust helmet padding for a perfect fit.
- Mounting Security: While the adhesive mount is generally firm, for angled helmet surfaces, consider reinforcing the attachment if you notice any looseness over time.
- App Language: Some users have reported the SafeRiding APP interface appearing in Chinese. Check for language settings within the app or updates that may address this.
- Music Sharing: The EJEAS Q2 does not explicitly support music sharing between communicators. Music is typically streamed from a single paired phone.
- Volume Expectations: While generally good, individual experiences with maximum volume may vary. If you find the volume lower than expected, ensure speakers are correctly positioned and the device is fully charged.
Warranty and Support
For detailed warranty information, technical support, or to access the full user manual in PDF format, please visit the official EJEAS website or refer to the provided documentation.
You can view the user manual (PDF) directly from the seller's provided link: EJEAS Q2 User Manual (PDF)
For further assistance, please contact EJEAS customer support through their official channels.