EPever MT11

Contents

EPEVER MT11 Remote Meter User Manual

Model: MT11 | Brand: EPever

1. Product Overview

The EPEVER MT11 Remote Meter is designed to work with DuoRacer series controllers. It allows users to monitor the controller's running data and working status in real-time. This remote meter offers ease of installation and operation, displays fault alarms, and provides locally readable real-time parameters. It is powered directly by the connected controller.

EPEVER MT11 Remote Meter front view
Figure 1: Front view of the EPEVER MT11 Remote Meter.

Product Classification

The MT11 Remote Meter is available in several configurations, primarily differing by the length of the communication cable included:

  • MT11 (with 1.5m communication cable): Includes Remote meter MT11, 1.5m communication cable (Model: CC-RS485-RS485-3.81-4P-150), and MT11 base.
  • MT11 (with 5m communication cable): Includes Remote meter MT11, 5m communication cable (Model: CC-RS485-RS485-3.81-4P-500), and MT11 base.
  • MT11 (with 10m communication cable): Includes Remote meter MT11, 10m communication cable (Model: CC-RS485-RS485-3.81-4P-1000), and MT11 base.
  • MT11 (without communication cable): Includes Remote meter MT11, 1.5m communication cable (Model: CC-RS485-RS485-3.81-4P-150), but does not include the MT11 base.

Customers should select the product configuration that best suits their installation requirements.

2. Important Safety Instructions

Please read and understand these safety instructions before installing or operating the MT11 remote meter to ensure safe and efficient use.

  • Inspect the product upon receipt. If any damage is found, contact the supplier or transportation company immediately.
  • Do not install the remote meter in environments that are humid, exposed to salt spray, corrosive, greasy, flammable, explosive, dusty, or other severe conditions.
  • Keep the product away from direct rain, excessive exposure, severe dust, vibrations, corrosive gases, and intense electromagnetic interference.
  • Prevent water from entering the product.
  • The product contains no user-serviceable parts. Do not attempt to disassemble or repair it.
  • The MT11 is designed to connect only with DR-N series charge controllers. Verify compatibility before purchase and installation.
  • Avoid installing the MT11 in areas with strong electromagnetic fields.

3. Setup and Installation

The MT11 remote meter can be installed using an optional base for wall mounting or surface mounting.

3.1 MT11 Base (Optional Accessory)

The MT11 base provides a secure mounting solution. Refer to the dimensions below for planning your installation.

Mechanical ParameterValue
Dimension114mm x 114mm x 44.41mm
Mounting Size88.6mm x 88.6mm
Mounting Hole SizeΦ5mm
EPEVER MT11 Remote Meter front and back views with mounting frame
Figure 2: MT11 Remote Meter with its mounting frame, showing front and back views.

3.2 Wall Installation

  1. Step 1: Locate and drill screw holes on the wall based on the Frame Mounting dimension of the base. Insert plastic expansion bolts into the drilled holes.
  2. Step 2: Use four PA4.2×32 self-tapping screws to securely fix the Frame to the wall.
  3. Step 3: Remove the decorative shell from the MT11 meter.
  4. Step 4: Use four M4×8 pan head screws to mount the MT11 meter surface onto the fixed Frame.
  5. Step 5: Re-install the decorative shell onto the MT11 meter.

3.3 Surface Installation

  1. Step 1: Locate and drill screw holes on the desired surface based on the installation size of the MT11.
  2. Step 2: Remove the decorative shell from the MT11 meter.
  3. Step 3: Use four M4×8 cross-recessed pan head screws with M4 nuts to mount the MT11 meter surface onto the panel.
  4. Step 4: Install the decorative shell onto the MT11 meter.

NOTE: When installing, ensure there is sufficient space for plugging/unplugging the communication cable and that the cable length is appropriate for your setup.

EPEVER MT11 Remote Meter with communication cable
Figure 3: MT11 Remote Meter with its communication cable.

4. Operating the MT11 Remote Meter

4.1 Product Features and Controls

The MT11 features an LCD screen for display and three buttons for operation.

  • LCD Screen: Provides a man-machine interaction operation interface to display various parameters and statuses.
  • Buttons: Two function buttons and one power switch button.
Button IconActionFunction
☰PressBrowse PV array parameters, Storage battery parameters, or automatically browse start battery parameters (Auto).
△/⚙️PressBrowse PV array parameters, Storage battery parameters, or Start battery parameters.
△/⚙️Press and hold 5sAccess Temperature units / Battery type settings.
⏻PressPower ON the meter.
⏻Press and hold 5sPower OFF the meter.

4.2 Rear View and Connections

The rear of the MT11 features an RS485 communication port, which is used to connect the controller and supply power to the MT11.

EPEVER MT11 Remote Meter back view showing RS485 port
Figure 4: Rear view of the MT11 showing the RS485 communication port.

RS485 Communication Cable Pin Definition

PINDefinition
1DC5V
2RS485-B
3RS485-A
4GND

4.3 Display and Navigation

The LCD screen provides clear visual feedback. For optimal viewing, ensure your line of sight is within a 90-degree angle to the display.

Auto Global-View Mode

  1. Step 1: Press the ☰ button. The

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.