1. Introduction
The Manhot Tuya Zigbee3.0 Smart Wall Switch (Model KS-811) is an intelligent remote control switch designed to modernize your home lighting. It features physical push buttons with LED indicators and offers multiple control options including voice control via Google Home and Alexa, manual control, APP control, and timer control. This switch is compatible with Zigbee 3.0 networks and integrates seamlessly with the Smart Life app, providing a convenient and smart way to manage your lighting.


2. Safety Information
WARNING: ELECTRIC SHOCK HAZARD
- Always turn off power at the circuit breaker before installing or servicing the switch.
- Installation should be performed by a qualified electrician or a person with a thorough understanding of electrical wiring.
- Ensure all wiring connections are secure and properly insulated.
- Do not exceed the specified electrical ratings of the device.
3. Package Contents
- Manhot Tuya Zigbee3.0 Smart Wall Switch (1, 2, or 3 Gang, depending on model purchased)
- Mounting Screws
- User Manual (PDF available online for detailed diagrams)
4. Installation Guide
4.1 Wiring Requirements
This smart wall switch supports both single-fire (no neutral wire required) and zero-fire (neutral wire required) wiring configurations. Please refer to the detailed wiring diagrams in the full PDF user manual for your specific installation type.
Important: Correct wiring is crucial for safe and proper operation. If you are unsure, consult a professional electrician.
4.2 Physical Installation
- Turn off Power: Locate your circuit breaker and turn off the power to the switch box you are working on. Verify power is off using a voltage tester.
- Remove Old Switch: Carefully remove the existing wall plate and unscrew the old switch from the wall box. Disconnect the wires.
- Wire the Smart Switch: Connect the wires to the Manhot Smart Wall Switch according to the wiring diagram provided in the comprehensive PDF manual. Ensure all connections are tight and secure.
- Mount the Switch: Gently push the wired switch into the wall box and secure it with the provided screws.
- Install Wall Plate: Attach the new wall plate over the switch.
- Restore Power: Turn the power back on at the circuit breaker.

4.3 App Installation and Pairing
- Download the Smart Life App: Scan the QR code in the PDF manual or search for 'Smart Life' in your smartphone's app store (iOS or Android).
- Register/Login: Open the app and register a new account or log in if you already have one.
- Add Device: Follow the in-app instructions to add a new device. Select 'Switch (Zigbee)' or similar.
- Pairing Mode: Put the smart switch into pairing mode (usually by pressing and holding a button for a few seconds until an indicator light blinks).
- Connect to Zigbee Hub: Ensure your Zigbee hub is powered on and connected to your home network. The app will guide you through connecting the switch to your hub.
- Rename Device: Once paired, you can rename the switch for easier control (e.g., 'Living Room Light').
5. Operating Instructions
5.1 Manual Control
The switch features physical push buttons. Press a button to toggle the connected light circuit on or off. An integrated LED indicator will show the status of each gang.

5.2 App Control
Use the Smart Life app on your smartphone or tablet to control the switch remotely. You can turn lights on/off, set schedules, and create automation routines.
Video: Demonstration of controlling the smart wall switch via the Smart Life app.
5.3 Voice Control
Integrate the Smart Life app with voice assistants like Amazon Alexa or Google Home. Once linked, you can use voice commands to control your lights. For example, "Alexa, turn on Living Room Light" or "Hey Google, turn off Bedroom Light."
5.4 Timer Control
Set schedules and timers through the Smart Life app to automatically turn lights on or off at specific times, enhancing convenience and energy efficiency.
6. Maintenance
- Cleaning: Use a soft, dry cloth to clean the surface of the switch. Do not use abrasive cleaners or solvents.
- Firmware Updates: Periodically check the Smart Life app for available firmware updates for your switch to ensure optimal performance and security.
7. Troubleshooting
- Q: The switch is unresponsive or "frozen" and requires a full power cycle to work again.
- A: This can sometimes occur due to network instability or a temporary software glitch. Try the following:
- Power Cycle: Turn off the power to the switch at the circuit breaker for about 10-15 seconds, then turn it back on.
- Check Zigbee Hub: Ensure your Zigbee hub is online and functioning correctly.
- Network Interference: Check for potential sources of interference (e.g., other wireless devices) near the switch or hub.
- Firmware Update: Ensure the switch's firmware is up to date via the Smart Life app.
- Q: The switch does not connect to the Smart Life app.
- A: Ensure:
- The switch is in pairing mode.
- Your Zigbee hub is powered on and connected to the internet.
- The switch is within range of your Zigbee hub.
- Your smartphone is connected to a 2.4GHz Wi-Fi network during the initial pairing process (some smart devices prefer this band).
- Q: Voice control is not working.
- A: Verify that:
- The Smart Life app is correctly linked to your Amazon Alexa or Google Home account.
- The switch is named appropriately in the Smart Life app and recognized by your voice assistant.
- Your voice assistant device is online and functioning.
8. Specifications
| Attribute | Value |
|---|---|
| Brand Name | manhot |
| Model Number | KS-811 (Zigbee Plush light switch) |
| Switch Type | Push Button Switch |
| Current Rating | 10A |
| Material | Plastic |
| Features | Smart Life Zigbee Switch |
| Item Type | SWITCHES |
| Is Smart Device | Yes |
| Origin | Mainland China |
| Certification | RoHS, CE |
| Product Dimensions (L x W x H) | 116mm x 75mm x 35mm |
| Package Weight | 0.198 kg |

9. User Tips
- Neutral Wire: The switch supports both neutral and no-neutral wiring. Always confirm your home's wiring configuration before installation. If you have a neutral wire, it's generally recommended for more stable operation.
- Zigbee Hub: Remember that this is a Zigbee device, so a compatible Zigbee hub (e.g., Tuya Zigbee Hub) is required for smart functionality and app control. It does not connect directly to Wi-Fi.
- App Automation: Explore the automation features in the Smart Life app. You can set up scenes, schedules, and link the switch with other smart devices for a truly integrated smart home experience.
10. Warranty and Support
For detailed warranty information, technical support, and comprehensive wiring diagrams, please refer to the official user manual PDF:
You can also contact Manhot Official Store customer service for further assistance.
11. Frequently Asked Questions (FAQ)
- Q: Is a neutral wire required for this switch?
- A: No, this switch supports both single-fire (no neutral wire) and zero-fire (neutral wire) wiring configurations. Please consult the wiring diagrams in the full PDF manual for specific instructions based on your setup.
- Q: Does this switch connect directly to the internet?
- A: No, this is a Zigbee 3.0 device. It requires a compatible Zigbee hub (e.g., a Tuya Zigbee Gateway) to connect to your home network and the internet for app and voice control.
- Q: What should I do if the switch becomes unresponsive?
- A: First, try power cycling the switch by turning off the power at the circuit breaker for 10-15 seconds, then turning it back on. Also, ensure your Zigbee hub is online and check for any network interference. If the issue persists, check for firmware updates in the Smart Life app.
- Q: Is this switch available in black?
- A: The product is available in various colors/gang configurations, including Beige (1 Gang-ZigBee), Black (2 Gang-ZigBee), and Blue (3 Gang-ZigBee). Please check the product listing for current availability.