QCY HT07 ArcBuds

Contents

QCY HT07 ArcBuds ANC Wireless Earphones User Manual

Model: HT07 ArcBuds

1. Setup

1.1 Know Your Earbuds

The QCY HT07 ArcBuds consist of two earbuds and a charging case. Each earbud features an indicator light, a multi-function touch panel, and a microphone. The charging case has a charging metal contact area and a Type-C charging port.

QCY HT07 ArcBuds earbuds and charging case
QCY HT07 ArcBuds earbuds and charging case.

1.2 Eartips Selection

Medium-sized eartips are suitable for most users. It is recommended to start by trying the medium eartips to find the most comfortable and secure fit.

1.3 Wearing Earbuds

  1. Insert the left and right earbuds into your ears correctly. Gently rotate and adjust them to find a comfortable and stable position.
  2. Ensure the microphone opening is pointing downwards, towards your mouth.
  3. Incorrect wearing may lead to a poor calling or listening experience.

1.4 First-Time Connection (Pairing)

Follow these steps for initial pairing:

  1. Pick up both earbuds from the charging case, then place them back into the case and close the lid. This step activates the new earbuds.
  2. Open the lid of the charging case. The earbuds will automatically power on.
  3. On your phone, open Bluetooth settings, search for "QCY ArcBuds", and tap to connect.
Video demonstrating how to connect the QCY HT07 ArcBuds to a device.

1.5 Factory Reset

To reset your earbuds to factory settings and clear all relative connectivity records:

  1. Place both the left and right earbuds into the charging case and open the lid.
  2. Simultaneously touch both earbud panels 5 times.
  3. The earbud LEDs will blink white 5 times, indicating that the factory reset is complete.
  4. After the reset, take the earbuds out of the case. They will automatically pair with each other and then enter pairing mode, allowing you to connect them to your phone again.
Video demonstrating how to perform a factory reset on the QCY HT07 ArcBuds.

1.6 Charging

Charging Earbuds:

  • When charging, the earbud indicator light will glow solid red.
  • Once fully charged, the indicator light will turn white for 30 seconds and then turn off.

Charging Case:

  • When charging, the charging case LED will blink white.
  • When fully charged, the charging case LED will glow solid white.

Charging Case Battery Level Indication:

  • High battery level: The LED turns red for 4 seconds and then turns off.
  • Low battery level: The LED blinks red for 4 seconds and then turns off.

2. Operating Instructions

2.1 Basic Controls

  • Power On: Open the charging case lid and take out the earbuds.
  • Power Off: Place the earbuds back into the charging case.
  • Answer/End Call: Double touch either earbud panel.
  • Ignore Call: Keep touching either earbud panel for approximately 1.5 seconds.
  • Music Play/Pause: Double touch the left or right earbud panel.
  • Skip Track Forward: Triple touch the right earbud panel.
  • Voice Assistant: Triple touch the left earbud panel.
  • Gaming Mode: Keep touching the left earbud panel for approximately 1.5 seconds.
  • ANC Mode Switching: Keep touching the right earbud panel for approximately 1.5 seconds to cycle through Active Noise Cancellation (ANC), Normal, and Transparency modes.

2.2 Music Control

Video demonstrating music control functions on the QCY HT07 ArcBuds.

2.3 Call Control

Video demonstrating call control functions (answer, end, ignore) on the QCY HT07 ArcBuds.

2.4 Voice Assistant

Video demonstrating how to activate the voice assistant on the QCY HT07 ArcBuds.

2.5 Active Noise Cancellation (ANC) Modes

The QCY HT07 ArcBuds feature 40dB Hybrid Active Noise Cancellation with four distinct modes to optimize your listening experience:

  • Indoor Mode: Ideal for quiet environments like offices or homes.
  • Commuting Mode: Reduces noise from public transport and busy streets.
  • Outdoor Mode: Minimizes environmental sounds for a clearer audio experience outdoors.
  • Anti-wind noise: Specifically designed to reduce wind interference during outdoor activities.

In stereo mode, ANC is activated by default. ANC is not available in mono mode.

Diagram showing 40dB Active Noise Cancellation effect
Illustration of 40dB Active Noise Cancellation in action.
Illustration of 4 different Noise Cancellation Modes
The four different noise cancellation modes: Indoor, Commuting, Outdoor, and Anti-wind noise.

The earbuds also feature an Upgraded Transparency Mode, allowing you to hear your environment and human voices clearly without removing the earbuds. This mode includes vocal enhancement and offers 6 levels of adjustment via the QCY APP.

Image showing a person talking, illustrating the Upgraded Transparency Mode
Upgraded Transparency Mode allows you to hear your surroundings.
Video demonstrating how to switch between ANC, Normal, and Transparency modes.

3. Maintenance

3.1 General Care

  • Do not use harsh chemicals or strong detergents to clean the earbuds.
  • Never disassemble or modify your earbuds for any reason to avoid damage or danger.
  • Do not store the earbuds in extreme temperatures (below 0°C or above 45°C).
  • Avoid using the indicator light close to the eyes of children or animals.
  • Do not use the earbuds during a thunderstorm to avoid dysfunction and increased risk of electric shock.

3.2 Charging and Storage

  • The earbuds need to be fully charged prior to first-time use.
  • If the earbuds are left unused for over two weeks, please recharge them to maintain battery health.
  • Always use chargers made by qualified manufacturers.

4. Troubleshooting (FAQ)

4.1 Only one earbud has sound. How to fix it?

Place both earbuds back into the charging case, close the lid, then take them out again. Check if both earbuds have sound. If only one still has sound, perform a factory reset on both earbuds.

4.2 My phone cannot connect to the earbuds. How to fix it?

Delete the pairing record for "QCY ArcBuds" on your phone. Then, search for "QCY ArcBuds" again in your phone's Bluetooth settings and attempt to connect.

4.3 No sound during music playback or calls. How to fix it?

For Android phones, go to your Bluetooth settings, click the settings icon next to the connected "QCY ArcBuds", and ensure that both "Phone audio" and "Media audio" are enabled. If there's still no sound, re-pair the earbuds with your phone.

4.4 Why is there latency in video/games?

Latency can occur due to various factors such as environmental interference, network conditions, and phone codec issues when transmitting audio data to the earbuds.

4.5 Why is the audio stuttering or disconnecting?

If there are strong Wi-Fi, 5G/4G signals, or high-power electrical appliances nearby, they may cause interference, leading to audio stuttering or disconnection. Try changing your environment or re-pairing the earbuds.

5. Specifications

FeatureSpecification
Brand NameQCY
ModelHT07 ArcBuds
MaterialABS, Plastic
Battery Capacity (Case)350mAh
Battery Capacity (Earbud)43mAh
Battery Life (Total)Up to 32 Hours
Voice Assistant Built-inYes
Maximum Wireless Range10m-20m
CategoryEarphones & Headphones
Earcups TypeSealed
Number Of Drivers6
Charging MethodCharging case (Type-C)
Headphone Pads MaterialSilicone
Driver Diameter10mm
Impedance RangeUp to 32 Ω
Bluetooth Version5.2 (Wuqi WQ7003AR Chip)
Package ListUser Manual, Charging case, Charging Cable, Replaceable Pads Set
FeaturesWaterproof, With microphone, Active Noise Cancelling, Smart Touch Control, Customizing APP, Sleep mode
CodecsSBC
With MicrophoneYes (6 Mics ENC & AI-Enhanced Calls)
Is WirelessYes
Support APPYes
Waterproof RatingIPX5
Frequency Response Range20 - 20000Hz
Sensitivity40dB
FunctionVideo Game, Common Headphone, Mobile Phone, HiFi Headphone, Sport, Outdoor, Office
Active Noise-CancellationYes (40dB Hybrid ANC, 4 Modes, Intelligent Anti-wind Noise)
Volume ControlYes
Vocalism PrincipleDynamic
Wireless TypeBluetooth
ConnectorsType-C
CommunicationWireless
StyleTrue Wireless Stereo (TWS) Earbuds
CertificationCE, FCC, RoHS, BQB
OriginMainland China
Resistance32 Ω
Support Memory CardNo
Available SystemiOS/Android
Sound Quality360° Surround Stereo Sound, HiFi Quality Sound
Low Latency0.08s for gaming
Diagram of earbud internal components highlighting 6 Mics ENC & AI-Enhanced Calls
Internal diagram showing the 6-microphone system for ENC and AI-enhanced calls.
Diagram illustrating Bluetooth 5.2 chip, 10mm dynamic driver, and 360° surround stereo sound
Diagram highlighting the Wuqi WQ7003AR Bluetooth 5.2 chip and 10mm dynamic driver for excellent sound quality.

6. Warranty and Support

6.1 Warranty Period

The warranty period for this product is 12 months from the date of purchase. Please retain your purchase receipts for verification.

6.2 Free Service Conditions

Free exchange service is provided for defects caused by quality issues within the warranty period. Please present your warranty card and purchase receipts to your distributor for service.

6.3 Non-Warranty Conditions

The following circumstances are not covered under warranty:

  • Damage caused by unauthorized disassembly.
  • Defects or physical damage caused by leaking or dropping.
  • Damage due to acts of God (e.g., natural disasters, earthquakes, lightning strikes).
  • Damage resulting from improper use, such as not following the user manual, water immersion, corrosion, crushing, or use in abnormal temperatures.

6.4 Contact Information

  • Customer Service Phone: 4008-306-708
  • Website: www.qcy.com
  • Manufacturer: Dongguan Hele Electronics Co., Ltd.
  • Address: No. 325 Yuehui Rd, Daojiao Town, Dongguan City, Guangdong Province, China

6.5 Environmental Information

Under normal use conditions, the environmental service life of this product is 10 years. During this period, the product will not leak any hazardous substances. This product is recyclable and should be disposed of according to local regulations.

Hazardous Substance Names and Content:

ComponentLead (Pb)Mercury (Hg)Cadmium (Cd)Hexavalent Chromium (Cr(VI))Poly Brominated Biphenyls (PBB)Poly Brominated Diphenyl Ethers (PBDE)
Outer CasingOOOOOO
Circuit Board ComponentsXOOOOO
BatteryOOOOOO
Charging CableXOOOOO
AccessoriesOOOOOO

This table is prepared in accordance with SJ/T 11364. 'O' indicates that the hazardous substance content in all homogeneous materials of this component is below the limit specified in GB/T 26572. 'X' indicates that the hazardous substance content in at least one homogeneous material of this component exceeds the limit specified in GB/T 26572.

7. User Tips

  • Explore Features: These headphones offer 40dB hybrid active noise cancellation, intelligent anti-wind noise, 32 hours ultra-long battery life, a customizing app, smart touch control, 360° surround sound, HiFi quality sound, transparency mode, voice assistant, and sleep mode. Take time to explore these features for an enhanced experience.
  • Versatile Use: The QCY HT07 ArcBuds are suitable for various activities including office work, video gaming, mobile phone usage, outdoor activities, sports, and general listening.
  • Optimal Sound: Users often praise the good sound quality and effective ANC. Ensure a proper fit with the correct eartips to maximize sound performance and noise cancellation.
  • App Customization: For the best experience and to customize settings like transparency mode levels, download and use the official QCY APP.
  • Hearing Protection: Please manage your listening time appropriately, as prolonged use of audio devices can potentially damage your hearing.
  • Regular Charging: If you don't use the earbuds for more than two weeks, remember to recharge them to prevent battery degradation.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.