1. Introduction
The Yeelight Aurora Smart Light Strip 1S is a versatile RGB LED light strip designed to enhance your living space with customizable lighting. It offers 16 million colors, adjustable brightness from 0-100%, and the ability to set custom schedules. This smart light strip integrates seamlessly with various smart home ecosystems, including Xiaomi Mi Home, Apple HomeKit, Amazon Alexa, and Google Assistant, providing convenient control options.

2. Product Components
The Yeelight Aurora Smart Light Strip 1S package typically includes the following components:
- Lightstrip (80 inches / 2 meters)
- Data cable (60 inches)
- Controller
- Connector
- Adapter
- Power cable
An optional Lightstrip Plus Extension (40 inches / 1 meter each) can be purchased separately to extend the length of your light strip up to 10 meters.



3. Setup Instructions
3.1 Physical Installation
- Prepare the Surface: Clean the installation surface thoroughly to ensure proper adhesion.
- Connect the Adapter: Plug the power cable into the adapter. Rotate the adapter by 45 degrees clockwise and snap it into place.
- Attach the Lightstrip: Remove the back adhesive tape from the lightstrip and paste it to your desired location. Ensure it is fixed securely.
- Power On: Connect the lightstrip to the controller, then plug the power supply into an electrical outlet.

3.2 Extending the Lightstrip
To extend the lightstrip, purchase Yeelight Lightstrip Plus Extension units. Match the end of the original lightstrip with the connection port of the Lightstrip Plus Extension and put it into the fastener. Ensure each strip is tightly connected to the other before mounting the next strip. The maximum extension length is 10 meters.
4. Operating Instructions
4.1 Basic Control
Once powered on, you can use the physical button on the controller:
- Tap the button once to turn on the lightstrip.
- Tap the button again to turn off the lightstrip.
- Press and hold the button to cycle through desired colors.
4.2 Intelligent Control (Yeelight App)
For advanced features and smart control, use the Yeelight App:
- Download the App: Search for "Yeelight" in your app store or scan the QR code provided in the manual to download the Yeelight App.
- Connect to Wi-Fi: Ensure your Wi-Fi network is available and you have proper internet access. The product is not compatible with 5G networks.
- Pair the Device: Turn on the lightstrip. Open the Yeelight App and follow the on-screen prompts to connect your device.


4.3 Apple HomeKit Smart Control
To control your lightstrip with Apple HomeKit:
- Open Home App: On your iPhone or iPad, open the Home App.
- Add Accessory: Click the "+" button and follow the prompts to add an accessory.
- Scan QR Code: Scan the QR code located on the product base or in the manual, or input the 8-digit code above the QR code to complete access.
Important Notes for HomeKit:
- Ensure your Wi-Fi network is available and you have proper internet access. This product is not compatible with 5G networks.
- For proper HomeKit compatibility, iOS 9 or above is recommended.
- HomeKit codes are required for reset every time.
- To control HomeKit-enabled accessories away from home or automatically through triggers (time of day, location, sensor detection), you will need a Home Hub (Apple TV 4th generation or later with tvOS 10+, or an iPad with iOS 10+).
4.4 Key Features
The Yeelight Aurora Smart Light Strip 1S offers a range of features for personalized lighting:
- Colors-Changing: Access 16 million versatile colors.
- Brightness Dimming: Comfortably dim brightness from 0-100%.
- Customize Schedules Setting: Manage daily routines and create ambient moments.
- Sync with Music: Dynamic lighting effects that synchronize with your music.
- Extendable: Extend the light strip up to 10 meters with additional extensions.
- Personalized Scenes: Create and save custom lighting scenes.
- Smart Timer: Set timers for automatic on/off functions.

5. Maintenance and Safety Warnings
To ensure the longevity and safe operation of your Yeelight Aurora Smart Light Strip 1S, please observe the following:
- Voltage Check: Always check the voltage before using the product. Improper voltage can cause damage and safety hazards.
- Indoor Use Only: This product is designed for indoor use only.
- Operating Environment: Install the lightstrip in an operating environment ranging between -10°C to +40°C (10°F to 104°F) to prevent early product failure.
- Not Waterproof: The lightstrip is not waterproof. Avoid exposure to water or high humidity.
- Regular Inspection: Regularly check the cable, power supply, and all other parts for any damage. Do not use the luminaire if any part is damaged.
- Cable Integrity: The external flexible cable or cord of this luminaire cannot be replaced. Do not use the luminaire if the cable or cord is damaged.
- Non-Replaceable Lamps: The lamps are not replaceable. When the light source reaches its end of life, the entire luminaire must be replaced.
- No Disassembly: Do not disassemble the product privately.
- Keep Away from Children: Keep the lightstrip away from children under 3 years old.
- Extension Limit: The maximum interconnected length is 10 meters (400 inches).
- Bending Limit: Do not bend the LED inside the lightstrip in more than 90 degrees to avoid damage.
- Packaging Connection: Do not connect the lightstrip to the power supply while it is still in its packaging.
- Compatibility: The Lightstrip Plus 1S is only compatible with Yeelight Lightstrip Plus Extension.
- Connectors: Interconnection must only be made using the supplied connectors. Any open end must be sealed off before use.
- Avoid Covering: Do not use the rope light when covered or recessed into a surface.
- No Cutting: Do not open or cut the rope light.
- Separation Distance: Under normal use, maintain a separation distance of at least 20cm between the antenna and your body.
6. Troubleshooting
6.1 How to Reset the Lightstrip
If you experience issues or need to connect the lightstrip to a new network environment, you can perform a reset:
- Disconnect Power: Unplug the lightstrip from the power supply.
- Press and Reconnect: Press and hold the power button on the controller, then reconnect the power supply without releasing the button.
- Observe Light Pattern: Continue holding the button for five seconds until the lightstrip cycles through red, green, and blue, and then turns yellow.
- Release Button: Release the button. The reset is now complete.
It is recommended to reset the lightstrip before using it in a new network environment.
6.2 FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. If this equipment causes harmful interference to radio or television reception, try the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
7. Specifications
| Attribute | Value |
|---|---|
| Model No. | YLDD05YL |
| Brand Name | Yeelight |
| Luminous Flux | 200 lm |
| Operating Temperature | -10 ~ 40°C |
| Frequency Bands | 2400MHz-2483.5MHz (Wi-Fi), 2402MHz-2480MHz (BT) |
| Rated Input (Lightstrip) | 24 VDC, 0.21A, 5.1W (80 in, 2m) 24 VDC, 0.88A, 21W (400 in, 10m) |
| Rated Input (Adapter) | 100-240V ~ 50/60Hz, 0.17A, 7.5W (80 in, 2m) 100-240V ~ 50/60Hz, 0.6A, 24W (400 in, 10m) |
| Maximum Output Power | 15.7 dBm (Wi-Fi), 5.7 dBm (BT) |
| Connectivity | Wi-Fi IEEE 802.11 b/g/n 2.4GHz |
| System Requirements | Android 4.4 & iOS 9.0 or above |
| Power Source | AC |
| Inbox Adaptor | Yes |
| Hign-concerned Chemical | None |
| Communication Method | Wi-Fi |
| State of Assembly | Ready-to-Go |
| Control Channels | 2 CHANNELS |
| Origin | Mainland China |
| Certification | CE |
8. User Tips
- Smart Control is Key: Many users find the Wi-Fi control via the app to be a significant benefit, offering great flexibility and features.
- White Color Tone: Be aware that when set to white, the light may have a slightly yellowish tint.
- Value for Money: Users often praise the product as a cost-effective alternative to more expensive smart lighting solutions, offering comparable quality and features.
9. Frequently Asked Questions (FAQ)
- Q: What equipment does it support?
- A: It supports Wi-Fi communication methods and integrates with platforms like Xiaomi Mi Home, Apple HomeKit, Amazon Alexa, and Google Assistant.
- Q: What are the highlights of this product?
- A: Key highlights include its origin from Mainland China, CE certification, and its ready-to-go state of assembly.
- Q: What are the benefits of using it?
- A: Benefits include versatile control channels and a broad range of applications due to its adaptable scale.
- Q: Does it support WPA3 encryption protocol?
- A: The device uses Wi-Fi IEEE 802.11 b/g/n 2.4GHz for connectivity. Specific WPA3 support is not explicitly stated in the specifications, but it supports standard Wi-Fi security protocols.
- Q: Does this work with Homey Pro?
- A: The product is officially compatible with Apple HomeKit, Amazon Alexa, and Google Assistant. Compatibility with other third-party smart home hubs like Homey Pro may depend on community integrations or specific Yeelight support for those platforms.
10. Warranty and Support
10.1 EU Declaration of Conformity
Qingdao Yeelink Information Technology Co., Ltd., declares that this equipment is in compliance with the applicable Directives and European Norms, as indicated by the CE certification.
10.2 WEEE Disposal and Recycling
This product should not be disposed of with other household waste throughout the EU. To prevent harm to the environment and human health from uncontrolled waste disposal, please recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can facilitate environmentally safe recycling.
10.3 Additional Resources
For a complete and detailed user manual, including further technical specifications and safety information, please refer to the official PDF document: View User Manual (PDF)