Introduction
The COOSPO BK805 is a versatile bicycle sensor designed to accurately track both speed and cadence data. Utilizing Bluetooth 5.0 and ANT+ wireless technologies, it can connect to a wide range of GPS bike computers, sports watches, and smartphone applications. This manual provides detailed instructions for installation, operation, maintenance, and troubleshooting to ensure optimal performance of your BK805 sensor.
Standard Accessories
The package includes the following items:
Image: Contents of the COOSPO BK805 package, including the sensor, magnets, and mounting hardware.
- Main Device x 1 (CR2032 battery installed)
- Crank Magnet x 1
- Spoke Magnet x 1
- Rubber Band for Main Device x 1
- Rubber Pad for Main Device x 1
- Battery Cover Tool x 1
- Cable Ties x 6
- Screw Wrench x 1
- User Manual x 1 (PDF version available: View PDF Manual)
Setup and Installation
1. Remove the Insulating Sheet
Before first use, the battery's insulating sheet must be removed.
- Rotate the battery cover to the OPEN position using the provided battery cover tool, then carefully remove the battery cover.
- Remove the battery insulating sheet.
- Reinstall the battery cover by placing it in the OPEN position and rotating it back to secure.
Image: Diagram showing how to open the battery cover and remove the insulating sheet.
2. Accessories Installation Diagram
The main device detects both cadence and speed, transferring data via Bluetooth and ANT+. The crank magnet detects cycling cadence, and the spoke magnet detects cycling speed.
Image: Diagram illustrating the placement of the main device, crank magnet, and spoke magnet on a bicycle.
3. Detailed Installation Steps
- **Install Crank Magnet:** Attach the crank magnet to the crank arm using two cable ties. Do not fully tighten the ties until the final position is confirmed.
- **Install Rubber Pad:** Place the rubber pad onto the main sensor.
- **Mount Cadence Sensor:** Align the sensing position of the main device (cadence sensor) with the crank magnet. Secure it to the bicycle frame using cable ties.
- **Mount Spoke Magnet:** Attach the spoke magnet to a bicycle spoke. Align it with the sensing position of the main device (speed sensor) and tighten it. The spoke magnet can be used for both circular and flat spokes.
- **Adjust and Secure:** Ensure the crank magnet and spoke magnet are aligned with their respective sensing positions on the main device. The distance between each magnet and the sensor should be less than 12mm. Fix the tail of the sensor with the screw wrench.
Notice: When rotating the sensor's tail, do not force it beyond its rotation range to prevent damage. - **Verify Installation:** Turn the crank and rotate the back wheel. The speed LED should flash blue, and the cadence LED should flash green. Once confirmed, tighten all cable ties and trim any excess. Secure any remaining accessories with the rubber band.
Image: The BK805 sensor mounted on a bicycle, showing the crank magnet and zip tie mounts. Includes a reminder about the cadence sensor magnet.
Image: Close-up of the BK805 sensor installed on the chainstay of a green bicycle, with the spoke magnet visible on the wheel.
Image: Close-up of the BK805 sensor on a green bicycle, showing its alignment with the crank arm and magnet.
Operating Instructions
Testing Mode & LED Light
The BK805 features a testing mode to confirm correct installation of the magnets and sensor. To enter testing mode, reinstall the battery.
- If the speed sensor (spoke magnet) is correctly installed and the wheel rotates, the LED light will flash blue.
- If the cadence sensor (crank magnet) is correctly installed and the crank is turned, the LED light will flash green.
The testing mode remains active for 15 minutes after battery installation. It is recommended to run this test each time the BK805 is installed.
Image: Close-up of the BK805 sensor showing the LED indicator and the battery compartment with a CR2032 battery.
Connecting to Devices
The BK805 uses Bluetooth 5.0 and ANT+ technology. To connect to your device (GPS bike computer, sports watch, or smartphone app):
- Ensure the sensor is awake by rotating the wheel or turning the crank.
- On your receiving device, go to the sensor pairing menu.
- Select the BK805 sensor from the list of available devices.
- Confirm the connection.
The Bluetooth 5.0 and ANT+ protocols can operate simultaneously, allowing connection to multiple devices if they support both protocols.
Image: A cyclist riding with a bike computer and smartphone displaying speed, cadence, and other cycling data from the BK805 sensor.
Image: A cyclist on an indoor trainer, with a large screen displaying the Zwift application, demonstrating third-party app compatibility.
Maintenance
Battery Replacement
If the device cannot be detected or stops functioning, consider replacing the battery.
- Rotate the battery cover to the OPEN direction using the battery cover tool to take off the battery cover.
- Remove the old battery. Dispose of it properly according to local regulations.
- Install a new CR2032 battery, paying attention to the positive (+) and negative (-) poles.
- Use the battery cover tool to rotate the battery cover in the opposite direction of OPEN to secure it.
WARNING: To avoid danger, batteries should be kept away from children.
Image: Diagram illustrating the steps for battery replacement, including opening the cover, removing the old battery, and inserting a new one.
Cleaning
Wipe the sensor with a soft, damp cloth as needed. Avoid using abrasive cleaners or solvents that could damage the device.
Troubleshooting
- **Missing Cadence or Speed Data:** Check the position of the magnets and sensor. Adjust them until the data is normal. Ensure the distance between the magnets and the sensor is less than 12mm.
- **Connection Issues:** If the sensor is not detected, reinstall the battery to enter testing mode and verify LED flashes (blue for speed, green for cadence). Ensure your connecting device supports Bluetooth 5.0 or ANT+.
- **Sensor Stops Working After Inactivity:** If the sensor stops working after a period of disuse, remove and reinsert the battery to reactivate it.
- **Cadence Sensor Not Working Independently:** Some users report that the sensor functions as a combined unit, and cadence data may not be transmitted independently without speed detection activating automatically.
Specifications
| Feature | Specification |
|---|---|
| Weight | 19.2 g |
| Wireless | Bluetooth 5.0 & ANT+ |
| Distance (Bluetooth 5.0) | 25 m |
| Distance (ANT+) | 10 m |
| Size | 102.4 x 44.7 x 22.1 mm |
| Battery Life | 500 hours |
| Battery Type | CR2032 |
| Waterproof | IP67 |
| LED Light Indicators | Red, Blue, Green |
Applicable Smart Phones
- iOS 9.0 or above, iPhone 4s model or above
- Android 4.3 or above with Bluetooth 5.0
Compatible Apps
CoospoRide, Wahoo Fitness, Zwift, Openrider, TrainerRoad, RidewithGPS, Rouvy, Peloton, or other Apps with speed and cadence display.
User Tips
- **Installation Patience:** While installation is generally easy, take your time to ensure proper alignment of magnets and the sensor for accurate readings.
- **Magnet Compatibility:** If the provided spoke magnet is not compatible with your bike's spokes, alternative magnets can be used and secured with electrical tape.
- **Battery Check:** Pay attention to the CR2032 battery status. If the sensor is not responding, a battery check or replacement is a good first step.
- **Indoor Trainer Use:** The sensor works effectively with stationary bikes and elliptical trainers. For elliptical trainers, you may need to remove protrusions designed for bicycle frames.
- **Wheel Circumference:** For accurate speed readings, ensure the wheel circumference is correctly set in your connected bike computer or app.
Frequently Asked Questions (FAQ)
- Q: What is this item's use?
- A: The COOSPO BK805 is a dual sensor for bicycles, used to measure and transmit both speed and cadence data wirelessly to compatible devices.
- Q: Can I use only the cadence by removing the speed adapter?
- A: Some users report the sensor functions as a combined unit, and cadence cannot be used independently without speed detection activating automatically.
- Q: Is it compatible with Coospo BC-107-B or BC200 bike computers?
- A: Yes, users confirm successful pairing and operation with Coospo BC107 and BC200 bike computers, indicating reliable compatibility and seamless connectivity.
- Q: Does it work with Garmin devices (e.g., Forerunner 255, Edge, Explore, Epix Pro Gen 2, Garmin 520 Plus)?
- A: Multiple buyers confirm successful pairing and reliable performance with various Garmin devices via ANT+ or Bluetooth, including seamless connectivity and accurate data transmission.
- Q: Is it compatible with Polar V650 or Suunto 5 Peak?
- A: Several buyers confirm successful pairing with various ANT+/Bluetooth bike computers. Given that Polar V650 and Suunto 5 Peak support these protocols, it is likely compatible.
- Q: Is it compatible with iGPSPORT devices (e.g., iGPSPORT BSC100S)?
- A: Buyers report successful pairing with various GPS bike computers and apps via Bluetooth and ANT+. While specific mentions of iGPSPORT are not consistently found in positive reviews, its broad compatibility suggests it may work.
- Q: Does the package come with sensors?
- A: The package includes the dual sensor unit (main device) and mounting accessories, including both crank and spoke magnets. However, a few buyers have noted the crank magnet was occasionally missing.
- Q: How do you calibrate the wheel radius?
- A: Wheel radius calibration is typically performed within the settings of your connected bike computer or smartphone application, not directly on the sensor itself. Refer to your device's manual for specific instructions.
Warranty and Support
For warranty information, technical support, or service inquiries, please contact COOSPO customer support directly or refer to the official COOSPO website. Product must be returned to the manufacturer for any service or repair.
Disclaimer
- The information contained in this manual is for reference only. The product described above may be subject to alteration due to the manufacturer's continuing research and development plans, without prior announcement.
- We shall not bear any legal responsibility for any direct or indirect, accidental, and special damages, losses, and expenses arising from or in connection with the use of this manual and the product described herein.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Contact your local government or a retailer for additional information.
Important Safety Information:
- Do not open or modify the product.
- Do not disassemble or attempt to service this product.
- This product is safe under normal and reasonably foreseeable operating conditions.
- If the product is operating improperly, call COOSPO support.
- Product must be returned to the manufacturer for any service or repair.
Battery Statement
WARNING: INGESTION HAZARD
- This product contains a button cell or coin battery.
- DEATH or serious injury can occur if ingested.
- A swallowed button cell or coin battery can cause Internal Chemical Burns in as little as 2 hours.
- KEEP new and used batteries OUT OF REACH of CHILDREN.
- Seek immediate medical attention if a battery is suspected to be swallowed or inserted inside any part of the body.
- Remove and immediately recycle or dispose of used batteries according to local regulations and keep away from children. Do NOT dispose of batteries in household trash or incinerate.
- Even used batteries may cause severe injury or death.
- Call a local poison control center for treatment information.
- Compatible battery type: CR2032.
- Nominal battery voltage: 3V.
- Do not force discharge, recharge, disassemble, heat above 45°C or incinerate. Doing so may result in injury due to venting, leakage or explosion resulting in chemical burns.
- Ensure the batteries are installed correctly according to polarity (+ and -).
- Do not mix old and new batteries, different brands or types of batteries, such as alkaline, carbon-zinc, or rechargeable batteries.
- Remove and immediately recycle or dispose of batteries from equipment not used for an extended period of time according to local regulations.
- Always completely secure the battery compartment. If the battery compartment does not close securely, stop using the product, remove the batteries, and keep them away from children.