Introduction
Thank you for choosing the QCY HT05 ANC Wireless TWS Bluetooth 5.2 Earphones. This manual provides detailed instructions on how to set up, operate, maintain, and troubleshoot your new device. Please read it carefully to ensure optimal performance and longevity of your earphones.

Image: QCY HT05 ANC Wireless TWS Bluetooth 5.2 Earphones and Charging Case.
Package Contents
Ensure all items are present in your package:
- QCY HT05 ANC Wireless TWS Bluetooth 5.2 Earphones
- Charging Case
- Charging Cable (Type-C)
- Replaceable Pads Set (Eartips)
- User Manual
Product Overview
Earbud Components

Image: Diagram showing earbud components including LED, Touch panel, Pogo pins, and Mic.
- Touch Panel: For controlling music playback, calls, and modes.
- LED Indicator: Shows status (pairing, charging, etc.).
- Pogo Pins: For charging the earbuds in the case.
- Microphone: For calls and voice assistant.
Charging Case Components

Image: Diagram showing charging case components including Charging case, Type-C cable, and Eartips.
- Charging Case: Stores and charges the earbuds.
- Type-C Cable: Used to charge the charging case.
- Eartips: Replaceable silicone tips for comfort and fit.
Setup
1. Choosing and Assembling Eartips
The medium-sized eartips fit most people. It is recommended to start by trying the medium eartips first to find the most comfortable and secure fit.

Image: Illustration of eartip selection and assembly.
2. First Time Connection
- Pick up both earbuds, pop them back into the case, then close the lid to activate them.
- Open the lid, and the earbuds will automatically power on.
- On your phone, search for "QCY Melobuds ANC" in the Bluetooth settings and tap to connect.
3. How to Switch Connection Between Two Devices
To switch between previously paired devices (e.g., from Device A to Device B):
- Push the earbuds into the case.
- Open the lid and keep pressing the charging case button for approximately 3 seconds until the LEDs on the earbuds blink white.
- Then pick up the earbuds.
- On the new device (Device B), search for "QCY Melobuds ANC" and tap to connect.
Note: Earbuds cannot be connected to two phones at the same time. They will auto-reconnect to the last phone in the connectivity record, if available.
4. Factory Reset
- Push the earbuds into the case.
- Open the lid and keep pressing the charging case button for approximately 10 seconds.
- The LEDs on the earbuds will blink white 5 times, indicating a successful factory reset.
After factory resetting, the earbuds will auto-pair with each other and become connectable to your phone when picked up.
5. Wearing the Earphones

Image: Proper wearing of the earbuds for optimal sound and call quality.
- Please put on the earbuds properly then adjust them to fit yourself.
- Set the microphone towards your mouth.
- Wearing them in a wrong way may cause bad calling or listening experience.
6. Charging
Charging Earbuds
When the earbuds are placed in the charging case, the LED indicator on the earbuds will glow solid red while charging and turn white for 30 seconds when fully charged, then turn off.
Charging Case
The LED indicator on the charging case will glow solid red while charging and turn solid white when fully charged.

Image: QCY HT05 earbuds in their charging case, illustrating the charging process.
Battery Level Indicator on Case:
- White LED: Battery level ≥ 20%
- Red LED: Battery level < 20%
Note: The earbuds need to be fully charged prior to first-time use. If the earbuds are left unused for over two weeks, please recharge them.
Operating Instructions
Touch Controls
- Power-on: Keep pressing the touch panel for 1.5 seconds.
- Power-off: Push earbuds into case.
- Answer/End Call: Double press the touch panel.
- Ignore Call: Keep pressing the touch panel for 1.5 seconds.
- Skip Track Forward: Triple press the right touch panel.
- Voice Assistant: Triple press the left touch panel.
- Playback/Pause: Double press the left/right touch panel to play/pause.
- Gaming Mode: Keep pressing the left touch panel for 1.5 seconds. (Features 70ms of low latency for gaming).
- ANC Mode: Keep pressing the right touch panel for 1.5 seconds to switch among ANC, Normal, and Transparency modes.
Active Noise Cancellation (ANC)
The QCY HT05 features 40dB in-depth Active Noise Cancellation, allowing ambient sound to disappear for pure audio experience. There are 3 adjustable levels for noise canceling:
- Indoor Mode: Ideal for quiet environments.
- Commuting Mode: Reduces noise in public transport or busy areas.
- Outdoor Mode: Effective in open, noisy environments.

Image: QCY app interface demonstrating the three noise cancellation modes.
The earbuds also feature noise cancellation against wind up to 45km/h, ensuring clear audio even on windy days.

Image: Diagram showing how wind noise cancellation works.
Transparency Mode
Hear ambient sounds clearly while still enjoying your music. This mode has 6 levels for customization, allowing you to stay aware of your surroundings.

Image: Transparency Mode in use, allowing interaction with surroundings.
HD Call with 6-Mic ENC
Equipped with six noise-canceling microphones and Environmental Noise Cancellation (ENC) technology, the HT05 ensures clear calls wherever you are.

Image: Exploded view of the earbud, highlighting the 10mm LCP graphene dynamic driver and 6-Mic ENC system.
QCY APP Customization
For a better user experience, download and install the QCY mobile APP client to get more convenient earphone control and customization options.
Sleep Mode
The earbuds support a dedicated Sleep Mode for comfortable use during rest.
Product Video
Video: Official product overview of the QCY Melobuds ANC Truly Wireless Earbuds, showcasing features like ANC, call quality, and battery life.
Maintenance and Care
- Before using the earbuds, please read the manual carefully and keep it for future references.
- Do not disassemble or modify your earbuds for any reason to avoid damages and danger.
- Do not store the earbuds in extreme temperatures (under 0°C or over 45°C).
- Avoid using the indicator close to the eyes of children or animals.
- Do not use the earbuds during a thunderstorm to avoid malfunction and increasing the risk of electric shock.
- Do not use harsh chemicals or strong detergents to clean the earbuds.
- Use only chargers produced by qualified manufacturers.
- Please arrange your listening time properly, as prolonged use may damage your hearing.
Troubleshooting (FAQ)
1. Only one earbud has sound, how to solve it?
Push both earbuds back into the charging case, close the lid, then take them out again. Check if both earbuds now have sound. If only one earbud still has sound, perform a factory reset.
2. Phone prompts unable to connect, how to solve it?
Delete the pairing record on your phone, then search for and pair with the earbuds again.
3. No sound when listening to music/calling, how to solve it?
For Android phones, check the Bluetooth settings for the connected earbuds. Ensure "Phone audio" and "Media audio" are enabled. If still no sound, re-pair the earbuds with your phone. If the phone program is at fault, try turning off and on the Bluetooth function or rebooting the phone.
4. Why is there a delay in video/games?
Delays can occur due to factors such as the usage environment, network conditions, and phone codec. The earbuds feature a 70ms low latency mode for gaming to minimize this.
5. How to solve sound stuttering/interruption?
If there are many Wi-Fi, 5G/4G signals, or high-power electrical appliances nearby, interference may cause stuttering or interruption. Try changing the environment or re-pairing the earbuds.
Specifications
| Feature | Specification |
|---|---|
| Brand Name | QCY |
| Model | HT05 |
| Material | ABS, Plastic |
| Weight | 50g |
| Battery Capacity (Case) | 350mAh |
| Battery Life (Total with Case) | Up to 30 hours |
| Bluetooth Version | 5.2 |
| Maximum Wireless Range | 10m-20m |
| Active Noise-Cancellation (ANC) | Yes, 40dB (3 levels: Indoor, Commuting, Outdoor) |
| Microphones | 6-Mic ENC for HD Call |
| Wind Noise Cancellation | Yes, against 45km/h wind |
| Transparency Mode | Yes (Upgraded, 6 levels) |
| Driver | 10mm LCP graphene dynamic driver |
| Sound Quality | HIFI Quality Sound |
| Chipset | Wuqi WQ7003AR |
| Low Latency | 70ms (Game Mode) |
| Waterproof Rating | IPX5 |
| Support APP | Yes (QCY APP) |
| Voice Assistant Built-in | Yes |
| Control | Touch Control, Control Button |
| Frequency Response Range | 20 - 20000Hz |
| Sensitivity | 40dB |
| Impedance Range | Up to 32 Ω |
| Certification | CE, FCC, RoHS, BQB |
| Communication Style | True Wireless In-ear |
User Tips
- Microphone Quality: Users report excellent microphone quality for calls, with effective noise cancellation, making conversations clear even in noisy environments.
- Sound Customization: The QCY app allows for personalized sound adjustments, which can significantly enhance your listening experience.
- Eartip Fit: Experiment with different eartip sizes to find the best fit for comfort and optimal sound isolation. A good seal is crucial for effective noise cancellation.
- iPhone Compatibility: The earbuds are compatible with iPhones, functioning well with iOS devices.
- Water Resistance: With an IPX5 waterproof rating, the earbuds are suitable for workouts and light rain, but should not be submerged in water.
Warranty and Support
Warranty Period
A 12-month warranty is provided from the date of purchase. Please keep your purchase receipt for warranty claims.
Free Service Conditions
Free service is provided for defects caused by quality issues within the warranty period. To claim free service, present your warranty card and purchase receipts to your distributor.
Exclusions from Free Service
Free service will not be provided under the following circumstances:
- Damages caused by unauthorized disassembly or modification.
- Defects or physical damages caused by leaking or dropping off.
- Damages by acts of God (e.g., natural disasters), abnormal voltage, or environmental factors.
- Failure to operate according to the user manual or damage caused by improper use (e.g., water immersion, crushing, use in abnormal temperatures).
Contact Information
- Phone: 4008-306-708
- Website: www.qcy.com
- Manufacturer: Dongguan Hele Electronics Co., Ltd.
- Address: No. 325 Yuehui Rd., Daojiao Town, Dongguan City, Guangdong Province, China
For further details, you can refer to the official user manual PDF: View User Manual (PDF)
Environmental Information
Product Hazardous Substance Names and Content
| Part Name | Lead (Pb) | Mercury (Hg) | Cadmium (Cd) | Hexavalent Chromium (Cr(VI)) | Polybrominated Biphenyls (PBB) | Polybrominated Diphenyl Ethers (PBDE) |
|---|---|---|---|---|---|---|
| Outer Casing | O | O | O | O | O | O |
| Circuit Board Components | X | O | O | O | O | O |
| Battery | O | O | O | O | O | O |
| Charging Cable | X | O | O | O | O | O |
| Accessories | O | O | O | O | O | O |
Note: This table is prepared in accordance with SJ/T 11364.
- O: Indicates that the hazardous substance content in all homogeneous materials of this component is below the limit requirements specified in GB/T 26572.
- X: Indicates that the hazardous substance content in at least one homogeneous material of this component exceeds the limit requirements specified in GB/T 26572.
Service Life
Under normal operating conditions as described in this manual, the environmental protection service life of this product is 10 years. During this period, the product will not leak any hazardous substances and can be recycled according to local regulations.