NB ERGONOMIC F120

Contents

NB F120 Gas Spring Full Motion TV Wall Mount

Model: F120 | Brand: NB ERGONOMIC

Introduction

This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your NB F120 Gas Spring Full Motion TV Wall Mount. Please read this manual thoroughly before installation and keep it for future reference. This wall mount is designed for 17-27 inch screens with a load capacity of 2-7 kg (4.4-15 lbs).

Safety Information

  • Ensure the mounting surface can safely support the combined weight of the mount and your display.
  • Do not exceed the maximum load capacity of 7 kg (15 lbs).
  • Always use appropriate tools and follow all installation steps carefully.
  • If you are unsure about any part of the installation, seek professional assistance.
  • Keep children and pets away during installation.

Package Contents

Verify that all components are present before beginning installation:

NB F120 Wall Mount and accessories

Image: NB F120 Wall Mount and included accessories, showing certifications.

  • Wall Mount Assembly (Gas Spring Arm)
  • Wall Plate
  • VESA Plate
  • Mounting Hardware (screws, anchors, washers)
  • Allen Key for adjustments
  • Instruction Manual (this document)

Specifications

Feature Specification
Model Number F120
Screen Size Compatibility 17-27 inches
Load Capacity 2-7 kg (4.4-15 lbs)
VESA Compatibility 75x75mm, 100x100mm
Adjustment Type Full-Motion, Gas Spring
Lifting Distance 155mm
Rotation 360 degrees
Tilt Angle +35 degrees / -50 degrees
Swivel Angle 180 degrees
Number of Panels 1
Installation Type Wall Mounting

Setup and Installation

Follow these steps to install your NB F120 wall mount:

  1. Marking Drill Holes: Position the wall plate on your desired wall location. Use the integrated spirit level to ensure it is perfectly horizontal. Mark the drill hole positions with a pencil. Marking drill holes for wall mount

    Image: Wall mount plate with spirit level, used for marking drill holes.

  2. Drilling and Securing Wall Plate: Drill holes at the marked positions. Insert wall anchors if necessary (for drywall or concrete). Secure the wall plate to the wall using the provided screws. Ensure it is firmly attached.
  3. Attaching VESA Plate to Monitor: Attach the VESA plate to the back of your monitor using the appropriate screws. Ensure the screws are tightened securely.
  4. Mounting Monitor to Arm: Carefully lift your monitor and slide the VESA plate onto the arm's mounting head. Ensure it clicks into place or is secured with any locking mechanisms.
  5. Cable Management: Route your monitor cables through the integrated cable management channels on the arm and wall plate for a clean setup.

For a visual guide, please watch the official installation video:

Video: Demonstration of NB F120 wall mount installation and adjustment.

Operating Instructions

The NB F120 mount offers full motion capabilities:

  • Height Adjustment: The gas spring arm allows for smooth vertical adjustment. Gently push or pull the monitor to your desired height.
  • Tilt Adjustment: The monitor can be tilted +35 degrees upwards and -50 degrees downwards. Adjust by grasping the top and bottom edges of the monitor and tilting.
  • Swivel Adjustment: The arm allows for 180-degree swivel. Gently push the monitor left or right to change its horizontal angle.
  • Rotation: The VESA plate can rotate 360 degrees, allowing you to switch between landscape and portrait orientations. Simply grasp the screen and rotate it.

Maintenance

  • Regularly check all screws and connections to ensure they are tight and secure.
  • Clean the mount with a soft, dry cloth. Avoid abrasive cleaners or solvents.
  • Do not attempt to disassemble the gas spring mechanism.

Troubleshooting

Problem: The arm is too rigid, or I can't move/press it.
Solution: For gas spring arms, you must complete the installation and attach the monitor to the mount before attempting to adjust the arm's tension. The weight of the monitor is required for proper function and adjustment.
Problem: The torque adjustment hole is not reachable.
Solution: First, finish the installation and attach the monitor to the mount. Second, press the arm down. The adjustment hole should then become accessible.
Problem: The arm doesn't stay in position (goes up or down automatically).
Solution: The gas spring tension (torque) needs adjustment. Use the provided Allen key to adjust the screw on the arm. Turn towards "-" to reduce tension (for lighter monitors or if the arm goes up too easily) or towards "+" to increase tension (for heavier monitors or if the arm goes down too easily). Make small adjustments and test until the arm holds the monitor in place.
Problem: The VESA plate is not in the correct orientation.
Solution: The VESA plate is designed to rotate 360 degrees. Simply grasp the screen and rotate it to the desired position.
Problem: My monitor does not have VESA holes.
Solution: This mount is designed for VESA-compatible monitors. If your monitor lacks VESA holes, you may need a non-VESA adapter (e.g., FP-1(H1) clamp-style adapter) which is sold separately. Ensure any adapter used is compatible with your monitor and the mount's weight capacity.

User Tips

  • Always ensure the monitor is securely attached to the VESA plate and the arm before releasing your grip.
  • Take your time during installation; rushing can lead to errors or damage.
  • The gas spring mechanism requires the monitor's weight to function correctly for tension adjustment. Do not attempt to adjust tension without the monitor attached.

Further Documentation

A comprehensive user manual in PDF format is available for download. You can view it at the following link: NB F120 User Manual (PDF).

© 2023 NB ERGONOMIC. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.