1. Safety Information
Please read this manual carefully before installation and use. Improper installation or use may result in injury or damage to the product or monitor. Keep this manual for future reference.
- Ensure the mounting surface can safely support the combined weight of the mount and your monitor.
- Do not exceed the maximum load capacity of 6.5 kg (15 lbs).
- Always use appropriate tools and follow all installation steps precisely.
- Keep children and pets away during installation.
- Check all connections and fasteners regularly to ensure they remain secure.
- This product is certified by TÜV Rheinland and GS (Geprüfte Sicherheit) for safety.
Image: NB F120 monitor wall mount with a monitor, highlighting screen size (17"-27") and loading capacity (2-6.5kg). Also shows TÜV Rheinland and GS certifications.
2. Product Overview
The NB F120 is a gas spring full-motion monitor wall mount designed for ergonomic display positioning. It offers a wide range of adjustments to enhance your viewing experience.
Key Features:
- Screen Size Compatibility: 17-27 inches
- Load Capacity: 2 kg (4.4 lbs) to 6.5 kg (15 lbs)
- VESA Compatibility: 75x75mm, 100x100mm
- Adjustment Type: Full-Motion Gas Spring
- Lifting Distance: 155mm
- Rotation: 360 degrees
- Tilt: +35 degrees / -50 degrees
- Swivel: 180 degrees
- Installation: Wall Mounting
Image: NB F120 monitor wall mount without a monitor, clearly displaying the VESA plate and the gas spring arm mechanism.
Image: NB F120 monitor wall mount from a side angle, emphasizing cable management features.
3. Setup and Installation
Follow these steps carefully to install your NB F120 monitor wall mount. It is recommended to watch the installation video for visual guidance.
Installation Video Guide:
Video: This video demonstrates the complete installation process and how to adjust the monitor mount.
Step-by-Step Installation:
- Prepare the Wall: Choose a suitable location on a sturdy wall. Use the mount's base as a template to mark the drilling points. Ensure the mount is level using the integrated bubble level.
- Drill Holes: Drill pilot holes at the marked locations.
- Attach Wall Plate: Secure the wall plate to the wall using the provided screws and anchors.
- Attach VESA Plate to Monitor: Secure the VESA plate to the back of your monitor using the appropriate screws. Ensure the VESA plate is correctly aligned. The VESA plate can rotate 360 degrees, so you can adjust its orientation after mounting the monitor.
- Mount Monitor to Arm: Carefully attach the monitor (with the VESA plate) to the gas spring arm.
- Adjust Gas Spring Tension: After mounting the monitor, the gas spring arm may be too rigid or too loose. You need to adjust the tension.
Important Note for Gas Spring Arms: For optimal performance, you must complete the installation and attach the monitor to the mount *before* attempting to adjust the arm's rigidity. Once the monitor is attached, press the arm down to expose the torque adjustment hole if it's not easily accessible.
Monitor without VESA Holes: If your monitor does not have VESA mounting holes, even after removing its stand, you will need a separate VESA adapter (e.g., FP-1(H1) clamp-style mount) to use this product.
Image: A monitor successfully mounted on the NB F120 arm, demonstrating cable connections and a clean setup.
4. Operating Instructions
The NB F120 monitor mount allows for flexible positioning of your display. Once installed and the gas spring tension is correctly set, you can easily adjust your monitor.
Adjusting Monitor Position:
- Height Adjustment: Gently push or pull the monitor up or down to your desired height. The gas spring mechanism will hold it in place.
- Tilt Adjustment: Tilt the monitor screen up or down (+35 degrees to -50 degrees) to reduce glare and optimize viewing angles.
- Swivel Adjustment: Swivel the monitor left or right (180 degrees) to share your screen or change your viewing perspective.
- Rotation: Rotate the monitor 360 degrees to switch between landscape and portrait orientations.
Gas Spring Tension Adjustment:
The gas spring tension needs to be adjusted to match the weight of your monitor. This ensures the arm holds the monitor securely at any position.
- Locate the tension adjustment screw on the arm (refer to the installation video for exact location).
- Use an Allen key to turn the screw:
- Turn towards '-' (counter-clockwise) if the arm automatically goes up (monitor is too light, torque is too much).
- Turn towards '+' (clockwise) if the arm automatically goes down (monitor is too heavy, torque is too small).
- Adjust gradually and test the arm's movement until the monitor stays in place when released.
5. Maintenance
- Cleaning: Wipe the mount with a soft, damp cloth. Avoid abrasive cleaners or solvents.
- Periodic Checks: Periodically check all screws and connections to ensure they are tight and secure.
- Lubrication: The gas spring mechanism is maintenance-free. Do not attempt to lubricate internal components.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Arm is too rigid / cannot move or press down. | Gas spring tension not adjusted with monitor attached. | Finish installation and attach the monitor. Then, press the arm down to adjust the gas spring tension. |
| Torque adjustment hole is not reachable. | Arm is in an extended position without monitor weight. | First, finish installation and attach the monitor. Second, press the arm down firmly; the hole should then become accessible. |
| VESA plate is not in the correct position. | Incorrect initial orientation. | The VESA plate can rotate 360 degrees. Simply grasp the screen and rotate it to the desired orientation. |
| Arm goes up automatically (doesn't stay down). | Torque is too high for the monitor's weight. | Reduce the gas spring torque by turning the adjustment screw towards '-'. |
| Arm goes down automatically (doesn't stay up). | Torque is too low for the monitor's weight. | Increase the gas spring torque by turning the adjustment screw towards '+'. |
7. User Tips
- This mount is noted for its excellent quality and a large number of degrees of freedom, allowing for versatile monitor positioning.
- Ensure you have the correct VESA adapter if your monitor lacks native VESA mounting holes.
- Take your time during installation, especially when marking drill points, to ensure a level and secure mount.
8. Warranty and Support
For detailed warranty information or technical support, please refer to the official product documentation or contact the seller directly.
A user manual in PDF format is available for download: View User Manual (PDF)