HIKVISION DS-KIS603-P

Contents

HIKVISION DS-KIS603-P(C) Video Intercom Kit User Manual

Model: DS-KIS603-P

1. Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your HIKVISION DS-KIS603-P(C) Video Intercom Kit. This kit typically includes a DS-KV6113-WPE1(C) Villa Door Station, a DS-KH6320-WTE1 Network Indoor Station, and may include a PoE switch or power adapters depending on the specific package. Please read this manual carefully before using the product to ensure proper functionality and safety.

2. What's in the Box

The HIKVISION DS-KIS603-P(C) Video Intercom Kit typically includes the following components:

  • DS-KV6113-WPE1(C) Villa Door Station (x1)
  • Surface-mounted rain cover (x1)
  • DS-KH6320-WTE1 Network Indoor Station (x1)
  • PoE Switch (x1) - Included with "with PoE Switch Kit" option
  • Power Supply (x2) - Included with "without poe Switch" option
  • RFID cards (x6)
HIKVISION DS-KIS603-P(C) Video Intercom Kit components including door station, indoor station, and PoE switch.
Figure 2.1: Kit overview showing door station, indoor station, PoE switch, and RFID cards.
HIKVISION DS-KIS603-P(C) Video Intercom Kit components including door station, indoor station, power supplies, and RFID cards.
Figure 2.2: Kit components for the "without PoE Switch" option, including two power supplies.

3. Specifications

3.1. DS-KV6113-WPE1(C) Villa Door Station

FeatureSpecification
Size138mm × 65mm × 27mm
MaterialPlastic
PowerIEEE802.3af Standard PoE, 12 VDC
Sensor Size1/3 inch
Viewing AngleHorizontal: 131°, Vertical: 78°
Camera Sensor TypeCMOS
Connection MethodWired
DoorbellYes
IP Camera InterfaceNo
Access ControlInductive Card
WaterproofYes
Smart Home InterfaceYes
InstallationSurface
Communication InterfaceWired
TypeIntercom System
Display Screen SizeNone
Answering ModeHands-free
Power (W)10 W
TechnologyDigital
Dimensions of the HIKVISION DS-KV6113-WPE1(C) door station with rain cover.
Figure 3.1: DS-KV6113-WPE1(C) Door Station Dimensions.

3.2. DS-KH6320-WTE1 Network Indoor Station

FeatureSpecification
System Parameters
Operation SystemLinux
ROM32 MB
RAM128 MB
ProcessorEmbedded high performance processor
Display Parameters
Screen Size7-inch
Operation MethodCapacitive touch screen
TypeColorful TFT
Resolution1024 × 600
Audio Parameters
Audio Input1 built-in omnidirectional microphone
Audio Compression StandardG.711U/G.711A
Audio Output1 built-in loudspeaker
Audio Compression Bitrate64 Kbps
Audio QualityNoise suppression and echo cancellation
Volume AdjustmentAdjustable
Capacity
Message CapacityTF card inserted: 200 captured pictures, 200 alarm records
Without TF card: 2 MB RAM for picture storage; The storage number is decided by the picture size, 200 alarm records
Notice Capacity200
Linked Indoor Extensions Capacity16
Linked Doorphone Capacity17
Linked Network Camera Capacity16
Network Parameters
Network ProtocolTCP/IP, SIP, RTSP
Wi-Fi2.4 GHz, IEEE802.11b, IEEE802.11g, IEEE802.11n
Device Interfaces
Alarm Input8
Network Interface1 RJ-45 10/100 Mbps self-adaptive
RS-4851 RS-485 (Half duplex)
TF CardSupport TF card, up to 128 G
Alarm Output2
Lock Control2 relays, Max. 30 VDC 0.3 A
General
Working Temperature-10°C to 55°C (14°F to 131°F)
Working Humidity10% to 90% (non-condensing)
Dimension (W × H × D)200 mm × 140 mm × 15.1 mm (7.9" × 5.5" × 0.6")
Power Consumption≤5 W
Supported LanguagesEnglish, Russian, Bulgarian, Hungarian, Greek, German, Italian, Czech, Slovak, French, Polish, Dutch, Portuguese (Brazil), Spanish, Hebrew, Romanian, Turkish, Estonian, Danish, Swedish, Norwegian, Finnish, Vietnamese, Croatian, Slovenian, Serbian, Arabic, Portuguese (Portugal), Lithuanian, Uzbek, Kazakh, Mongolian, Ukrainian

4. Setup and Installation

4.1. Before You Start

  • Ensure all related equipment is powered off during installation.
  • Prepare necessary tools: drill (2.8-6mm) and a gradienter.
  • If a protective shield is desired, ensure it is purchased before installation.

4.2. DS-KV6113-WPE1(C) Villa Door Station Installation

The door station supports surface mounting. It is recommended to install the device with a protective shield if installing outdoors.

4.2.1. Surface Mounting without Protective Shield

  1. Stick the mounting template on the wall. Drill screw holes according to the template. Remove the template.
  2. Secure the mounting plate on the wall using the 4 supplied screws.
  3. Install the villa door station onto the mounting plate. Fix the device with the set screw.

Note: Apply silicone sealant around the cable wiring area to prevent water from entering.

4.2.2. Surface Mounting with Protective Shield

  1. Stick the mounting template on the wall. Drill screw holes according to the template. Remove the template.
  2. Align the protective shield with the mounting template.
  3. Secure the mounting plate and protective shield on the wall using the 4 supplied screws.
  4. Install the villa door station onto the mounting plate. Fix the device with the set screw.
Diagram showing surface mounting of the door station with and without a protective shield.
Figure 4.1: Door Station Surface Mounting (A: without shield, B: with shield).

The recommended installation height (distance between the camera and the ground) is 1.4 m to 1.6 m.

4.3. DS-KV6113-WPE1(C) Villa Door Station Wiring

Ensure all wiring is done with power off to prevent damage.

4.3.1. Terminal Description

Back view of the HIKVISION DS-KV6113-WPE1(C) door station showing wiring terminals.
Figure 4.2: Back of Door Station with Wiring Ports.
Diagram of DS-KV6113-WPE1(C) door station terminals and wiring connections.
Figure 4.3: DS-KV6113-WPE1(C) Terminal and Wiring Description. Note: RS-485 terminal is not supported.

4.3.2. Door Lock Wiring

Connect the door lock to the door station terminals. Terminal NC/COM is default for magnetic lock/electric bolt; NO/COM is default for electric strike.

Wiring diagram for connecting a door lock to the DS-KV6113-WPE1(C) door station.
Figure 4.4: Door Lock Wiring Diagram.

4.3.3. Door Contact Wiring

Connect the door contact to the door station terminals.

Wiring diagram for connecting a door contact to the DS-KV6113-WPE1(C) door station.
Figure 4.5: Door Contact Wiring Diagram.

4.3.4. Exit Button Wiring

Connect an exit button to the door station terminals.

Wiring diagram for connecting an exit button to the DS-KV6113-WPE1(C) door station.
Figure 4.6: Exit Button Wiring Diagram.

4.4. DS-KH6320-WTE1 Network Indoor Station Installation

The indoor station supports wall mounting with or without a junction box.

4.4.1. Wall Mounting with Junction Box

  1. Chisel a hole in the wall (76mm width x 76mm length x 50mm depth).
  2. Insert the junction box into the chiseled hole.
  3. Fix the wall mounting plate to the junction box with 2 screws.
  4. Hook the indoor station to the wall mounting plate by inserting the plate hooks into the slots on the rear panel. The lock catch will automatically engage.

4.4.2. Wall Mounting without Junction Box

  1. Insert 2 expansion tubes into the wall.
  2. Fix the wall mounting plate to the wall with 2 screws.
  3. Hook the indoor station to the wall mounting plate by inserting the plate hooks into the slots on the rear panel. The lock catch will automatically engage.
Diagram showing wall mounting of the indoor station with and without a junction box.
Figure 4.7: Indoor Station Wall Mounting (with/without junction box).

5. Operation

5.1. Activate Device via Web

Before using the device, you must activate it by setting a strong password.

  1. Power on the device and connect it to the network.
  2. Enter the device's IP address (default: 192.0.0.65) into a web browser.
  3. Create and confirm a strong password.
  4. Click OK to activate the device.

5.2. Access to the Device by Web Browsers

  1. In the browser address bar, enter the device's IP address and press Enter.
  2. Enter the user name (default: admin) and password, then click Login.

5.3. Communicate with Indoor Station

  1. On the indoor station, go to Settings > Intercom Press Button to Call.
  2. Set the call number for each button or enable Call Management Center.
  3. Press the button on the door station to call the indoor station.

5.4. Issue Card

  1. On the indoor station, go to Settings > Access Control and Elevator Control.
  2. Click Issue Card. Present the RFID card on the card reading area of the door station.
  3. A confirmation window will pop up on the settings page when issuing is finished.

Note: The door station supports up to 10,000 cards. A voice prompt will indicate if the card limit is exceeded.

5.5. Unlock Door

After issuing cards, you can unlock the door by presenting the issued RFID cards to the card reading area on the door station.

5.6. Remote Access and Control via Mobile App

The intercom system can be integrated with a mobile application (e.g., Hik-Connect) for remote access and control. When a visitor presses the doorbell, you will receive a notification on your smartphone, allowing you to view the visitor, communicate, and unlock the door remotely.

Screenshots of the mobile application interface for the HIKVISION intercom, showing call, live view, and settings options.
Figure 5.1: Mobile App Interface for Intercom Control.

Video 5.1: Demonstration of calling, remote unlocking via mobile app, motion detection recording, and call recording playback.

5.7. Motion Detection Recording

The indoor station can record video clips when motion is detected by the door station's camera. These recordings can be reviewed from the indoor station's interface under the 'Video Record' section.

5.8. Call Recording

The system automatically records video of calls made from the door station. These call recordings can be accessed and played back from the indoor station's interface.

6. Maintenance

6.1. Cleaning

  • Regularly clean the camera lens and screen with a soft, dry cloth.
  • Avoid using harsh chemicals or abrasive cleaners that could damage the surfaces.

6.2. Firmware Updates

Periodically check the HIKVISION official website for any available firmware updates for your devices. Keeping the firmware updated ensures optimal performance, security, and access to new features.

7. Troubleshooting

  • No Power/Device Not Turning On: Check all power connections. Ensure the PoE switch is powered and connected correctly, or that the 12VDC power adapters are securely plugged in.
  • No Video/Audio During Call: Verify network connections for both the door station and indoor station. Ensure cables are properly seated in the RJ-45 ports. Check microphone and speaker settings on the indoor station.
  • Door Not Unlocking: Check the wiring to the door lock (refer to Section 4.3.2). Ensure the RFID card is correctly issued and presented to the card reading area.
  • Cannot Access Device via Web: Ensure the device is activated with a strong password. Verify that the computer and the device are on the same subnet. Check the IP address.
  • Language Issues: The indoor station supports multiple languages as listed in the specifications (Section 3.2). Navigate to the language settings on the indoor station to select your preferred language.

8. User Tips

  • Initial Inspection: Upon receiving your kit, carefully inspect all components to ensure they are in good condition. This helps ensure a smooth installation process.
  • Wiring Verification: Double-check all wiring connections, especially for the door lock and power, before powering on the system to prevent potential issues.
  • Mobile App Integration: Utilize the mobile application (e.g., Hik-Connect) for enhanced convenience, allowing you to answer calls and unlock doors from anywhere.
  • Regular Review of Recordings: Periodically check motion detection and call recordings on the indoor station to monitor activity and ensure proper system function.

9. Warranty and Support

For detailed warranty information, technical support, and further documentation, please refer to the official HIKVISION website or contact your local distributor.

A comprehensive user manual in PDF format is available for download. You can access it here: HIKVISION DS-KIS603-P(C) User Manual (PDF)

© 2023 HIKVISION. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.