1. Introduction
This manual provides detailed instructions for the installation, configuration, and operation of your HIKVISION DS-KIS603-P(C) Video Intercom Kit. This kit is designed to provide secure and convenient communication for your home or office, featuring a multi-language interface, Power over Ethernet (PoE) support, and mobile app integration.
2. Package Contents
The DS-KIS603-P(C) kit typically includes the following components:
- 1 x DS-KV6113-WPE1(C) Villa Door Station
- 1 x Surface-mounted Rain Cover for Door Station
- 1 x DS-KH6320-WTE1 Indoor Station
- 1 x PoE Switch (for kits with PoE)
- 2 x Power Supplies (for kits without PoE switch, or as spares)
- 6 x RFID Cards
- Mounting Templates and Screws


3. Specifications
3.1. DS-KV6113-WPE1(C) Villa Door Station
| Feature | Specification |
|---|---|
| Size | 138mm x 65mm x 27mm |
| Power | IEEE802.3af standard PoE, 12 VDC |
| Viewing Angle | H: 131°, V: 78° |
| Sensor Size | 1/3 inch |
| Camera Sensor Type | CMOS |
| Waterproof | Yes |
| Installation | Surface |
| Connection Type | Wired |
| Access Control | Inductive Card |
| Doorbell | Yes |
| Material | Plastic |
| Smart Home Interface | Yes |
| IP Camera Interface | No |
| Power (W) | 10 W |
3.2. DS-KH6320-WTE1 Indoor Station
| Category | Feature | Specification |
|---|---|---|
| System Parameters | Operation System | Linux |
| ROM | 32 MB | |
| RAM | 128 MB | |
| Processor | Embedded high-performance processor | |
| Display Parameters | Screen Size | 7-inch |
| Operation Method | Capacitive touch screen | |
| Type | Colorful TFT | |
| Resolution | 1024 × 600 | |
| Audio Parameters | Audio Input | 1 built-in omnidirectional microphone |
| Audio Output | 1 built-in loudspeaker | |
| Audio Quality | Noise suppression and echo cancellation | |
| Volume Adjustment | Adjustable | |
| Capacity | TF Card | Support TF card, up to 128 G |
| Message Capacity | TF card inserted: 200 captured pictures, 200 alarm records; Without TF card: 2 MB RAM for picture storage | |
| Linked Indoor Extensions | 16 | |
| Linked Doorphone Capacity | 17 | |
| Linked Network Camera Capacity | 16 | |
| Network Parameters | Network Protocol | TCP/IP, SIP, RTSP |
| Wi-Fi | 2.4 GHz, IEEE802.11b, IEEE802.11g, IEEE802.11n | |
| Device Interfaces | Alarm Input | 8 |
| Network Interface | 1 RJ-45 10/100 Mbps self-adaptive | |
| General | Weight | Net: 355 g (0.8 lb), Gross: 683 g (1.5 lb) |
| Working Temperature | -10°C to 55°C (14°F to 131°F) | |
| Dimension (W x H x D) | 200 mm × 140 mm × 15.1 mm (7.9" × 5.5" × 0.6") |
4. Setup and Installation
Before starting, ensure all related equipment is powered off. You will need a drill (Ø2.8-6mm) and a gradienter for installation.
4.1. Door Station Installation (DS-KV6113-WPE1(C))
The door station supports surface mounting. You can choose to install it with or without a protective shield.
4.1.1. Surface Mounting without Protective Shield
- Stick the mounting template on the wall. Drill screw holes according to the template. Remove the template.
- Secure the mounting plate on the wall with 4 supplied screws.
- Install the villa door station to the mounting plate. Fix the device with the set screw.
Note: Apply silicone sealant around the cable wiring area to prevent water entry.
4.1.2. Surface Mounting with Protective Shield
- Stick the mounting template on the wall. Drill screw holes according to the template. Remove the template.
- Align the protective shield with the mounting template.
- Secure the mounting plate and protective shield on the wall with 4 supplied screws.
- Install the villa door station to the mounting plate. Fix the device with the set screw.
Note: If installing outdoors, it is advised to install the device with a protective shield.



4.2. Indoor Station Installation (DS-KH6320-WTE1)
The indoor station supports wall mounting. There are two installation modes:
4.2.1. Wall Mounting with Junction Box
- Chisel a hole in the wall (76mm W x 76mm L x 50mm D).
- Insert the junction box into the hole.
- Fix the wall mounting plate to the junction box with 2 screws.
- Hook the indoor station to the wall mounting plate by inserting the plate hooks into the slots on the rear panel.
4.2.2. Wall Mounting without Junction Box
- Insert 2 expansion tubes into the wall.
- Fix the wall mounting plate to the wall with 2 screws.
- Hook the indoor station to the wall mounting plate by inserting the plate hooks into the slots on the rear panel.

4.3. Wiring Diagrams
Proper wiring is crucial for the correct functioning of your intercom system. Refer to the diagrams below for terminal connections.
4.3.1. Door Station Terminal Description
The door station has various terminals for power, network, and external devices:
- 12 VDC IN: Power Supply Input (Red wire)
- GND: Grounding (Black wire)
- NC: Door Lock Relay Output (Normally Closed)
- NO: Door Lock Relay Output (Normally Open)
- COM: Common Interface
- AIN1: For the access of Door Contact
- AIN3: For the access of Exit Button
- RS-485+ / RS-485-: RS-485 Interface (Reserved, Orange/Yellow wires)
- Network Interface: For Ethernet connection.
Note: The RS-485 terminal is not supported for this model.
4.3.2. Door Lock Wiring
Connect your door lock to the door station using the NC/NO and COM terminals. The default setting for accessing magnetic lock/electric bolt is NC/COM, and for electric strike is NO/COM.
4.3.3. Door Contact Wiring
Connect a door contact sensor to the AIN1 and GND terminals to detect the door's open/closed status.
4.3.4. Exit Button Wiring
Connect an exit button to the AIN3 and GND terminals to allow exiting from the premises.
4.4. Initial Device Activation and Configuration
You must activate the devices by setting a strong password before use.
4.4.1. Activate Door Station via Web
- Power on the door station and connect it to the network.
- Enter the default IP address (192.0.0.65) into a web browser to access the activation page.
- Create and confirm a strong password.
- Click OK to activate the device.
Note: The computer and the device must be on the same subnet.
4.4.2. Activate Indoor Station
- Power on the indoor station. It will automatically enter the activation page.
- Create and confirm a strong password.
- Tap OK to activate the indoor station.
4.4.3. Quick Configuration (Indoor Station)
- Choose Language and tap Next.
- Set network parameters (Local IP, Subnet Mask, Gateway) or enable DHCP.
- Configure indoor station parameters: Edit Floor and Room No., create SIP register password.
- Link related devices: The door station should appear in the list if on the same LAN. Tap to link.
- Tap Finish to save settings.
5. Operating Instructions
5.1. Communication with Indoor Station
From the indoor station, navigate to Settings > Intercom Press Button to Call. Set the call number for each button or configure the Call Management Center. Pressing the button on the door station will initiate a call to the indoor station.
5.2. Issue RFID Cards
To issue new RFID cards for access control:
- On the indoor station, go to Settings > Access Control and Elevator Control.
- Select "Issue Card".
- Present the RFID card to the card reading area on the door station.
- A confirmation message will appear on the indoor station when the card is successfully issued.
Note: The system supports up to 10,000 cards. Only Mifare cards are supported.
5.3. Unlock Door
After issuing RFID cards, you can unlock the door by presenting the issued card to the door station's card reading area.
5.4. Motion Detection and Call Recording
The system supports motion detection recording and call recording. These recordings can be reviewed on the indoor station.
5.5. Mobile App Integration (Hik-Connect)
The DS-KH6320-WTE1 indoor station supports convenient Hik-Connect APP Mobile Control. This allows you to receive calls, open the door, and view live video remotely from your smartphone.

6. Maintenance
- Cleaning: Use a soft, dry cloth to clean the surfaces of the door station and indoor station. Avoid using harsh chemicals or abrasive cleaners.
- Firmware Updates: Regularly check for and install firmware updates to ensure optimal performance and security. Refer to the HIKVISION official website for the latest firmware.
- Environmental Conditions: Ensure the devices are operated within their specified temperature and humidity ranges to prevent damage.
- Cable Management: Periodically inspect all wiring for any signs of wear or damage. Ensure connections are secure.
7. Troubleshooting
- No Power: Check all power connections and ensure the power adapter or PoE switch is functioning correctly. Verify that the power supply matches the device requirements (12 VDC for door station, 12 VDC for indoor station).
- No Video/Audio: Ensure network cables are securely connected. Check network settings (IP address, subnet mask, gateway) for both devices. Restart both the door station and indoor station.
- Door Not Unlocking: Verify the door lock wiring (NC/NO/COM) is correct. Check the power supply to the door lock. Ensure the RFID card is properly issued and presented.
- Cannot Access Device via Web: Confirm the device's IP address and ensure your computer is on the same network subnet. Clear browser cache or try a different browser.
- Mobile App Issues: Ensure the indoor station is connected to the internet and the Hik-Connect app is updated to the latest version. Check network connectivity on your mobile device.
- Poor Wi-Fi Signal: If using Wi-Fi for the indoor station, ensure it is within range of your router and there are no significant obstructions. Consider using a wired connection if Wi-Fi is unstable.
8. User Tips
- For optimal outdoor performance and longevity of the door station, always use the provided surface-mounted rain cover.
- When setting up the network, using DHCP can simplify initial configuration, but a static IP address is often recommended for stability in a permanent installation.
- Regularly back up any important recordings or captured images from the indoor station's TF card.
- Familiarize yourself with the Hik-Connect app's features for remote monitoring and control, which significantly enhances the system's convenience.
9. Warranty and Support
For detailed warranty information, technical support, and the complete user manual, please refer to the official HIKVISION documentation or visit their support website. A comprehensive user manual in PDF format is available for download:
User manual (PDF): View PDF Manual