HIKVISION DS-KV6113-WPE1(C)

Contents

HIKVISION DS-KV6113-WPE1(C) IP Doorbell User Manual

Model: DS-KV6113-WPE1(C)

1. Introduction

This manual provides detailed instructions for the installation, configuration, and operation of the HIKVISION DS-KV6113-WPE1(C) IP Doorbell. This device is a multi-language, waterproof IP doorbell with Wi-Fi connectivity, supporting standard IEEE802.3af PoE and IC card unlock functionality. It can be used as a standalone unit to call a mobile phone app.

Front view of the HIKVISION DS-KV6113-WPE1(C) IP Doorbell with key features like Wi-Fi, PoE, and IC card unlock.

Front view of the HIKVISION DS-KV6113-WPE1(C) IP Doorbell highlighting Wi-Fi, PoE, and IC card unlock features.

2. Package Contents

Please check the package for the following items:

  • 1 x DS-KV6113-WPE1(C) IP Doorbell Unit
  • 1 x Surface-Rain Cover
  • 6 x IC Cards
Image showing the package contents: one DS-KV6113-WPE1(C) doorbell unit, one surface rain cover, and six IC cards.

Contents included in the product package.

3. Specifications

Feature Specification
Model NumberDS-KV6113-WPE1(C)
Dimensions (Size)138mm x 65mm x 27mm
Power SupplyIEEE802.3af Standard PoE, 12 VDC
Power Consumption10 W
Camera Sensor TypeCMOS
Sensor Size1/3 inch
Viewing AngleHorizontal: 131°, Vertical: 78°
WaterproofYes
Access ControlInductive Card
Installation TypeSurface
Connection TypeWired
Answering ModeHands-free
MaterialPlastic
CertificationCE
Dimensions of the HIKVISION DS-KV6113-WPE1(C) IP Doorbell, showing height (149.78mm) and width (79.56mm).

Detailed dimensions of the doorbell unit.

4. Diagram References

4.1. Appearance

  1. Microphone
  2. Camera
  3. Indicator
  4. Loudspeaker
  5. Terminals
  6. Debugging Port (Note: For debugging only)
  7. Set Screw
  8. TF Card Slot
  9. Button
  10. Card Reading Area
  11. TAMPER
  12. Network Interface

4.2. Indicator Description

  • Unlock: Green
  • Call: Orange
  • Communicate: White
Detailed diagram of the HIKVISION DS-KV6113-WPE1(C) IP Doorbell components and terminal wiring.

Diagram illustrating the components and terminal layout of the doorbell.

5. Installation

The video intercom villa door station supports surface mounting.

5.1. Before You Start

  • Ensure all related equipment is powered off before installation.
  • Tools required: Drill (Φ2.8-6) and gradienter.
  • Purchase the protective shield separately if desired.

5.2. Surface Mounting without Protective Shield

  1. Stick the mounting template on the wall. Drill screw holes according to the template. Remove the template.
  2. Secure the mounting plate on the wall with 4 supplied screws.
  3. Install the villa door station to the mounting plate. Fix the device on the mounting plate with the set screw.

Note: Apply silicone sealant around the cable wiring area to prevent water entry.

5.3. Surface Mounting with Protective Shield

  1. Stick the mounting template on the wall. Drill screw holes according to the template. Remove the template.
  2. Align the protective shield with the mounting template.
  3. Secure the mounting plate and protective shield on the wall with 4 supplied screws.
  4. Install the villa door station to the mounting plate. Fix the device on the mounting plate with the set screw.

Note: If installing outdoors, it is advised to install the device with a protective shield.

The recommended distance between the camera and the ground is 1.4 m to 1.6 m.

Diagram illustrating recommended installation heights for the HIKVISION DS-KV6113-WPE1(C) IP Doorbell camera, showing horizontal and vertical viewing angles.

Recommended installation heights and viewing angles.

6. Terminal and Wiring Description

6.1. Terminal Description

  • NC: Door Lock Relay Output (Normally Closed)
  • NO: Door Lock Relay Output (Normally Open)
  • COM: Common Interface
  • AIN1: For the access of Door Contact
  • AIN3: For the access of Exit Button
  • AIN2 & AIN4: Reserved
  • 485-: RS-485 Interface (Reserved)
  • 485+: RS-485 Interface (Reserved)
  • 12 VDC IN: Power Supply Input
  • GND: Grounding

Note: RS-485 terminal is not supported for this model.

6.2. Door Lock Wiring

Terminal NC/COM is set as default for accessing magnetic lock/electric bolt; terminal NO/COM is set as default for accessing electric strike.

Wiring diagram for door lock connection.

Wiring diagram for connecting a door lock to the doorbell.

6.3. Door Contact Wiring

Wiring diagram for door contact connection.

Wiring diagram for connecting a door contact sensor.

6.4. Exit Button Wiring

Wiring diagram for exit button connection.

Wiring diagram for connecting an exit button.

7. Configuration via Web

7.1. Activate Device via Web

You must activate the device by setting a strong password before use.

  • Default IP Address: 192.0.0.65
  • Default Port No.: 8000
  • Default User Name: admin
  1. Power on the device and connect it to the network.
  2. Enter the IP address into the address bar of a web browser and press Enter to access the activation page. (Ensure the computer and device are on the same subnet).
  3. Create and enter a strong password in the password field.
  4. Confirm the password.
  5. Click OK to activate the device.

Note: If the device is not activated, basic operation and remote configuration cannot be performed.

7.2. Access to the Device by Web Browsers

  1. In the browser address bar, enter the device's IP address and press Enter to access the login page.
  2. Enter the user name and password, then click Login.

7.3. Communicate with Indoor Station

  1. Navigate to Settings > Intercom Press Button to Call to enter the settings page.
  2. Set the parameters:
    • Edit call No. for every button.
    • Check Call Management Center to set the button calling center. (Note: If both Call Management Center and call No. are set, the call management center has higher priority).
  3. Press the button to call the indoor station.

7.4. Issue Card

  1. Navigate to Settings > Access Control and Elevator Control to enter the settings page.
  2. Click Issue Card. Present the card on the card reading area.
  3. When issuing is finished, a window will pop up on the settings page.

Note: Only Mifare cards are supported. Up to 10,000 cards can be managed. A voice prompt "No more cards can be issued" will be heard if the limit is exceeded.

8. Operation

8.1. Calling via Hik-Connect App

When a visitor presses the call button on the doorbell, a notification will be sent to your Hik-Connect mobile application. You can answer the call and communicate with the visitor.

8.2. Remote Unlocking via Hik-Connect App

During an active call on the Hik-Connect app, you can remotely unlock the door by tapping the 'Open Lock' icon on the app interface.

8.3. Motion Detection Notifications

To receive motion detection alerts, enable the 'Report Events' and 'Receive and Push Event Notifications' options within the doorbell's settings in the Hik-Connect app. When motion is detected, an alarm notification will be pushed to your phone.

8.4. RFID Card Unlock

After successfully issuing RFID cards (as described in Section 7.4), you can unlock the door by simply presenting an authorized IC card to the card reading area on the doorbell.

Video demonstrating app call, remote unlock, motion detection setup, and RFID card unlock.

9. Maintenance

  • Regularly clean the camera lens and microphone/speaker areas with a soft, dry cloth to ensure optimal performance.
  • Avoid using harsh chemicals or abrasive cleaners.
  • Ensure the protective shield (if installed) is free from obstructions and damage.
  • Check wiring connections periodically for any signs of wear or corrosion.
  • Keep the device firmware updated to the latest version for improved security and features.

10. Troubleshooting

10.1. No Power

  • Check if the power adapter is correctly connected and supplying 12V DC.
  • If using PoE, ensure the PoE switch or injector is functioning correctly and providing power according to IEEE802.3af standard.
  • Verify all power cables are securely connected.

10.2. Cannot Connect to Network

  • Ensure the Ethernet cable is properly connected to the network interface.
  • Verify that the device's IP address is on the same subnet as your router/network.
  • Check network settings in the Hik-Connect app or web interface.
  • Restart the doorbell and your network equipment.

10.3. App Notifications Not Received

  • Ensure 'Report Events' and 'Receive and Push Event Notifications' are enabled in the app settings (refer to Section 8.3).
  • Check your phone's notification settings for the Hik-Connect app to ensure they are not blocked.
  • Verify your phone has a stable internet connection.

10.4. RFID Card Not Unlocking Door

  • Ensure the RFID card has been successfully issued and registered with the doorbell (refer to Section 7.4).
  • Confirm the card is a Mifare type, as other card types are not supported.
  • Present the card firmly and correctly to the card reading area.

11. Support & Further Information

For more detailed information, including advanced configurations and troubleshooting, please refer to the official user manual PDF:

View User Manual (PDF)

You can also visit the HIKVISION official website for product support and FAQs.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.