Ritesdepot Dia. 3mm T-Type skirt PMMA cable

Contents

Dia.3mm T-type Invisible Skirt Side Glow Fiber Optic Cable User Manual

Product: Ritesdepot Dia.3mm T-type Invisible Skirt Side Glow Fiber Optic Cable

1. Product Overview

The Dia.3mm T-type Invisible Skirt Side Glow Fiber Optic Cable is designed for various lighting applications, including car interior ambient lighting, pickup light modification, RGB lighting decoration, DIY light projects, and mood lighting for homes/vehicles.

Key Features:

  • 3mm diameter T-type design with invisible skirt fin for seamless installation.
  • Side glow effect for uniform, soft light distribution.
  • Available in black, milk (frosted), or transparent cable options.
  • Flexible, bendable design for custom routing.
  • Compatible with most RGB light sources/engines (sold separately).
Milky T-type fiber optic cable
Figure 1: Milky T-type Side Glow Fiber Optic Cable.
Comparison of black, milky, and transparent fiber optic cables
Figure 2: Cable color options: Black, Milky (Frosted), and Transparent.

2. Specifications

Parameter Details
Cable Diameter 3mm
Available Lengths 2M / 3M / 5M / 10M / 20M
Cable Color Black / Milk (Frosted) / Transparent
Emitting Light Color RGB (depends on your light source)
Material High-quality PMMA fiber core + PVC outer layer
Operating Temperature -20°C to +60°C
Minimum Bending Radius ≥ 30mm (avoid sharp kinks)
Voltage 12V
Luminous Flux <60
Power Source DC
Installation Method Self-contained
Item Type Optic Fiber Lights
Diagram showing 3mm fiber diameter and 6mm skirt width
Figure 3: Dimensions of the T-type fiber optic cable, showing 3mm fiber diameter and 6mm skirt width.

3. Package Contents

  • 1 x Fiber optic cable (selected length)
  • 1 x Quick installation guide (this document)

4. Installation Instructions (Setup)

Tools You May Need:

  • RGB light source/engine (sold separately)
  • Sharp utility knife or fiber cutter
  • Fine sandpaper (2000 grit)
  • Isopropyl alcohol and cloth
  • Cable ties or mounting clips (for securing)
  • Optional: heat-shrink tubing or clear tape

Step-by-Step Installation:

  1. Plan Your Layout:
    • Measure the path for your fiber cable to determine the required length.
    • Avoid tight bends, sharp corners, or areas where the cable will be pinched or crushed.
  2. Cut the Cable:
    • Use a sharp utility knife or fiber cutter to cut the cable to your desired length.
    • Ensure the cut is perfectly perpendicular to the cable axis.
  3. Polish the End Face:
    • Use fine sandpaper to gently polish the cut end of the cable.
    • Finish with a polishing cloth or microfiber to achieve a smooth, clear surface. This ensures maximum light transmission.
  4. Clean the Cable:
    • Wipe the entire length of the cable with isopropyl alcohol to remove dust, oil, or fingerprints, which can block light.
  5. Connect to Light Source:
    • Insert the polished end of the fiber cable into the output port of your RGB light source.
    • Ensure a snug fit to prevent light leakage. Some light sources may require an adapter.
  6. Route and Secure the Cable:
    • Run the cable along your planned path. The T-type skirt fin allows for hidden installation in trim, gaps, or custom channels.
    • Use cable ties or mounting clips to secure the cable at regular intervals, avoiding over-tightening which can damage the fiber.
  7. Test the Installation:
    • Power on the light source and check for uniform light along the entire length of the cable.
    • Verify no dark spots or dim sections, which may indicate poor polishing, a tight bend, or damage to the cable.
Car interior with multi-color ambient lighting installed
Figure 4: Example of fiber optic cable installed in a car interior, providing multi-color ambient lighting.
Car interior with blue ambient lighting installed
Figure 5: Another view of fiber optic cable installed in a car interior, showcasing blue ambient lighting.

5. Operating Instructions

Power On/Off:

Operate your light source according to its instructions. The fiber cable itself does not require power; it acts as a light guide.

6. Maintenance

Cleaning:

Periodically wipe the cable with a soft, dry cloth to remove dust. For stubborn dirt, use a cloth lightly dampened with isopropyl alcohol.

Avoid These:

  • Do not expose the cable to high temperatures (e.g., near heaters or engine components).
  • Do not pull, stretch, or twist the cable excessively.
  • Do not use harsh chemicals or abrasive cleaners on the cable.

7. Troubleshooting

Issue Possible Cause Solution
No light at all Light source not powered on; Poor connection; Damaged fiber end Check light source power; Re-seat the cable; Re-cut and polish the end face
Dim light overall Dirty end face; Incorrect light source power; Long cable length Clean/polish the end; Use a more powerful light source; Reduce cable length
Dark spots along cable Physical bends/kinks; Sharp damage to the fiber; Cable pinched or crushed Re-route the cable to eliminate tight bends; Inspect for damage; Relieve pressure on the cable
Uneven light output Poorly polished end; Dust on the cable surface Re-polish the end face; Clean the entire cable with alcohol

8. Safety & Warnings

  • Keep out of reach of children.
  • Do not install the cable in areas where it may interfere with vehicle controls, airbags, or visibility while driving.
  • Ensure all electrical connections for the light source are properly insulated to prevent short circuits.
  • Do not attempt to modify or disassemble the fiber optic cable itself.

9. User Tips

  • This product is a passive light guide; it requires a separate RGB light source to function.
  • The brightness and color of the light depend entirely on the specifications of your light source.
  • The "invisible skirt" design is intended for flush mounting and will be hidden once installed in your chosen location, providing a seamless aesthetic.

10. Warranty & Support

For detailed warranty information and technical support, please refer to the official product documentation or contact the seller directly. A user manual in PDF format is available for download: View User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.