1. Product Overview
The Soft Dia.3mm Black T-type Invisible Skirt Side Glow Fiber Optic Cable is designed for creating custom ambient lighting effects. It is ideal for car pickup lights, interior ambient lighting, RGB DIY modifications, mood lighting in vehicles, and other custom projects.
Key Features:
- 3mm diameter soft T-type design with black invisible skirt fin for hidden installation.
- PMMA core with side ribbon mount for easy, seamless routing.
- Flexible, bendable structure for custom car interior layouts.
- Compatible with most RGB light sources (light engine sold separately).
- Uniform side glow for soft, even lighting effects.
2. Specifications
| Parameter | Details |
|---|---|
| Cable Diameter | 3mm |
| Available Lengths | 2M / 3M / 5M |
| Outer Cable Color | Black (T-type skirt) |
| Core Material | High-quality PMMA (Polymethyl Methacrylate) |
| Operating Temperature | -20°C ~ +60°C |
| Minimum Bending Radius | ≥ 30mm (avoid sharp kinks) |
| Light Compatibility | RGB light sources (color output depends on connected light engine) |
| Voltage | 12V |
| Is Bulbs Included | No |
| Luminous Flux | <60 |
| Power Source | DC |
| Installation Method | Self-contained |
| Certification | CE |
3. Package Contents
The package includes:
- 1 x Fiber optic cable (selected length)
- 1 x Installation guide (this document)
4. Setup (Installation Instructions)
This section provides detailed instructions for installing your fiber optic cable. A compatible RGB light source/engine is required and sold separately.
Required Tools (Not Included):
- RGB light source/engine (compatible with 3mm fiber optic cables)
- Sharp fiber cutter or utility knife
- Fine-grit sandpaper (2000 grit recommended)
- Microfiber polishing cloth
- Isopropyl alcohol + lint-free cloth
- Mounting clips, cable ties, or adhesive tape
Step-by-Step Installation:
-
Plan the Layout:
- Measure the required cable length and path, accounting for curves and corners.
- Avoid tight bends (under 30mm radius) and areas where the cable will be pinched or crushed.
-
Cut the Cable:
- Use a sharp cutter to make a clean, perpendicular cut at the desired length.
- Avoid jagged or angled cuts, as these reduce light transmission efficiency.
-
Polish the Cut End:
- Sand the cut end with fine-grit sandpaper in circular motions to remove rough edges.
- Finish with a microfiber cloth to achieve a smooth, clear surface for maximum light output.
Figure 3: Close-up of the fiber optic cable end, showing the T-type skirt and the core. -
Clean the Cable:
- Wipe the entire length of the cable with isopropyl alcohol to remove dust, oil, or fingerprints, which cause uneven light.
-
Connect to Light Source:
- Insert the polished end of the fiber cable into the output port of your RGB light engine.
- Ensure a tight fit to prevent light leakage; use an adapter if required by your light source.
Figure 4: Testing the fiber optic cable with a light source (laser pointer shown for demonstration).
Figure 5: Another view of the fiber optic cable glowing blue when connected to a light source. -
Route and Secure:
- Run the cable along your planned path. The T-type skirt allows for hidden installation in trim, gaps, or interior panels.
- Use the side ribbon mount or mounting clips to secure the cable at regular intervals (do not over-tighten, as this can damage the fiber core).
Video 1: Demonstration of installing the fiber optic cable into a car interior panel gap and showcasing various ambient lighting colors.
Figure 6: A hand carefully inserting the fiber optic cable into a car's interior panel gap for hidden installation. -
Test the Installation:
- Power on the light source and check for uniform light along the entire cable length.
- Verify no dark spots or dim sections; re-polish the end or adjust the path if issues occur.
Figure 7: Example of installed fiber optic cable providing purple ambient lighting in a car interior.
Figure 8: Example of installed fiber optic cable providing blue ambient lighting in a car interior.
Figure 9: Example of installed fiber optic cable providing multi-color ambient lighting in a car interior.
For a visual guide, you can refer to the official user manual PDF: User Manual (PDF).
5. Operating Instructions
The fiber optic cable is a passive light guide and does not produce light on its own. It requires a separate RGB light source/engine to function. Follow the instructions provided with your light engine for power control, color selection, and brightness adjustments.
6. Maintenance
Cleaning:
- Periodically wipe the cable with a dry microfiber cloth to remove dust and debris.
- For stubborn dirt or grime, use a microfiber cloth lightly dampened with isopropyl alcohol.
Storage:
- When not in use, keep the cable coiled loosely.
- Avoid creating tight kinks or sharp bends, as these can permanently damage the fiber core and affect light transmission.
7. Troubleshooting
| Issue | Possible Cause | Solution |
|---|---|---|
| No light output | Light source not powered; Poor connection; Damaged cut end | Check light source power; Re-seat the cable; Re-cut and polish the end face |
| Dim or uneven light | Dirty/polished end; Dust on cable surface; Sharp bends | Re-polish the end; Clean the entire cable; Re-route to eliminate tight bends |
| Dark spots along the cable | Physical damage to fiber core; Cable pinched/crushed | Inspect for damage; Relieve pressure on the cable; Replace damaged sections if needed |
8. Safety & Warnings
- Do not install the cable where it may interfere with vehicle controls, airbags, or driver visibility.
- Ensure all electrical connections for the light source are properly insulated to prevent short circuits.
- Keep the cable away from high-temperature sources (e.g., engine components, heaters).
- Do not pull, stretch, or twist the cable excessively, as this can break the PMMA core.
- Keep out of reach of children.
9. User Tips
- The black T-type skirt is designed to hide the cable during installation; the light will emit evenly from the side once connected to a light source.
- Brightness and color are entirely dependent on your connected RGB light engine. For optimal results, ensure your light engine is compatible and provides sufficient illumination.
- For permanent installation in vehicles, test the setup thoroughly before final mounting to avoid rework.
- Some users have noted that light transmission can appear uneven if the light source is not powerful enough or if the cable ends are not properly prepared (cut and polished). Always ensure a clean, perpendicular, and polished cut for best light distribution.
10. Frequently Asked Questions (FAQ)
- Q: How does the light glow compared to transparent fiber optic cables?
- A: This fiber optic cable features a black T-type skirt designed for hidden installation. The light is intended to emit evenly from the side once connected to a light source, providing a soft, ambient glow rather than a direct, bright light like a transparent cable might. The black skirt helps to conceal the cable itself, making the light appear to emanate from the surface it's installed in.
- Q: Is the light bright, or does it produce little light?
- A: The brightness and color of the light are entirely dependent on the connected RGB light engine. To achieve desired brightness, ensure you use a compatible and sufficiently powerful light source. Proper preparation of the fiber optic cable ends (clean, perpendicular, and polished cuts) is also crucial for maximizing light output and even distribution.
11. Warranty & Support
For any questions or support regarding this product, please contact the seller or refer to the product listing for additional information. Specific warranty details may vary and are typically provided by the seller at the time of purchase.