1. Product Overview
This manual provides essential information for the installation, operation, and maintenance of the A1707 Logic Board for the MacBook Pro 15-inch models from 2016 and 2017.
1.1 Product Identification
- Product Name: Logic Board (Motherboard)
- Model: A1707
- Compatible Years: 2016, 2017
- Part Numbers (APN): 820-00281-A (2016 models), 820-00928-A (2017 models)
- Manufacturer: Shenzhen Manbei Trading Co., Ltd
1.2 Compliance Information
This product meets CE RoHS certification standards and has passed EMC LVD testing, ensuring it complies with relevant European safety and environmental requirements.
Video: Overview of the A1707 Logic Board, showcasing its physical appearance and key components.
2. Safety & Warnings
Please read all instructions carefully before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Keep the device and its cord out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
- Do not expose to water or moisture.
- Handle with care to avoid cuts or injuries.
- Always take anti-static precautions (e.g., use an anti-static wrist strap) when handling electronic components to prevent damage from electrostatic discharge.
3. Setup and Installation
This section outlines the steps for safely installing the A1707 Logic Board into your MacBook Pro.
3.1 Pre-Installation Steps
- Power Disconnection: Before beginning any work, ensure your MacBook Pro is completely powered off. Disconnect the power adapter (charger) and the internal battery.
- Workspace Preparation: Prepare a clean, well-lit, and static-free workspace.
- Tooling: Gather necessary tools, which typically include pentalobe screwdrivers, Torx screwdrivers, spudgers, and thermal paste.
3.2 Installation Procedure
- Remove Old Logic Board: Carefully disassemble your MacBook Pro and remove the existing logic board, noting the placement of all screws and connectors.
- Clean Computer: Thoroughly clean the interior of your computer, especially any dust or debris from the chassis and fan areas.
- Install New Logic Board: Carefully place the new A1707 Logic Board into the computer chassis. Ensure all mounting points align correctly.
- Apply Thermal Grease: Apply a small, even amount of high-quality thermal grease to the CPU and GPU chips on the logic board. This is crucial for proper heat dissipation.
- Connect Components: Reconnect all internal components (e.g., display cable, keyboard/trackpad cables, SSD, fans, speakers) to the new logic board.
- Install Battery: Reinstall the internal battery and connect its cable to the logic board.

Image: Main view of the A1707 Logic Board, showing CPU, GPU, and Touch ID connector.

Image: Close-up view of the CPU and GPU components on the A1707 Logic Board, where thermal grease should be applied.
3.3 Post-Installation Steps
- Connect Power: Connect the power adapter (charger) to your MacBook Pro.
- Initial Power On: Press the power button. The computer should turn on. Observe for any error messages or unusual behavior.
- System Check: Once the operating system loads, perform a basic check of all functionalities (e.g., display, keyboard, trackpad, Wi-Fi, USB ports).
- Reassemble: If all checks are successful, carefully reassemble the bottom case of your MacBook Pro.
4. Operating Instructions
As a core component, the logic board's operation is integrated with the MacBook Pro's system. Once properly installed, the computer will function as normal.
- Power On: Press the power button on your MacBook Pro.
- Normal Use: Use your MacBook Pro as you normally would. The logic board manages all core computing functions.
- Power Off: To shut down, select 'Shut Down' from the Apple menu.
5. Maintenance
Proper care can extend the lifespan of your logic board and MacBook Pro.
- Storage: If the device is not in use for an extended period, turn it off and store it in a dry place, away from extreme temperatures and humidity.
- Cleaning: Keep the interior of your MacBook Pro clean from dust. Periodically clean the cooling fans and heat sinks to ensure optimal thermal performance.
- Avoid Spills: Prevent any liquids from coming into contact with the logic board or other internal components.
- Handle with Care: Avoid dropping or subjecting your MacBook Pro to physical shocks, which can damage internal components.
6. Troubleshooting
If you encounter issues after installing the logic board, consider the following general troubleshooting steps:
- No Power: Double-check all power connections, including the battery and power adapter. Ensure the battery is charged.
- No Display: Verify that the display cable is securely connected to the logic board. Try an external monitor to rule out display issues.
- System Instability: Ensure all components (RAM, SSD, etc.) are properly seated. Re-check thermal paste application.
- Component Not Working: Verify the specific component's cable is correctly connected to the logic board.
- Consult Apple Support: For system-level issues or if problems persist, consult Apple's official support resources or a certified technician.
7. Specifications
| Feature | Specification |
|---|---|
| Product Type | Motherboard / Logic Board |
| Model Number | A1707 |
| Part Numbers (APN) | 820-00281-A (2016), 820-00928-A (2017) |
| Compatible Brand | APPLE |
| Compatible Series | MacBook Pro 15-inch Retina |
| Compatible Years | 2016, 2017 |
| CPU Model | Intel Core i7 (various clock speeds) |
| Onboard CPU | Yes |
| Memory Capacity (RAM) | 16 GB |
| Onboard Memory | Yes |
| Memory Type | DDR3 (Note: A1707 typically uses LPDDR3) |
| Graphics Card Type | Non-Integrated-AMD (Dedicated GPU) |
| GPU Model | Others (AMD Radeon Pro) |
| GPU Memory Size | 2 GB |
| SSD Capacity Options | 256GB, 512GB, 1TB, 2TB |
| Onboard SSD | Yes |
| Support Screen Size | 15 inches |
| Condition | Original Used, Good |
| Tested | Tested Good working |
| Certification | CE |

Image: A1707 Logic Board for 2016 models (APN: 820-00281-A).

Image: A1707 Logic Board for 2017 models (APN: 820-00928-A).
8. User Tips
While no specific user tips were provided, here are some general recommendations for component replacement:
- Static Discharge: Always use an anti-static wrist strap or frequently touch a grounded metal object to discharge static electricity before handling the logic board.
- Screw Organization: Keep track of all screws during disassembly. They often vary in size and length, and using the wrong screw in the wrong place can cause damage.
- Gentle Handling: Electronic components are delicate. Handle the logic board by its edges and avoid touching exposed circuits.
- Thermal Paste: Ensure you use fresh, high-quality thermal paste and apply it correctly for optimal cooling.
A detailed PDF user manual is available for download from the seller, which may contain additional diagrams and instructions.
9. Warranty and Support
For warranty information, please refer to the terms and conditions provided by your seller at the time of purchase. Support for this product is typically provided by the seller.
- Technical Support: Contact your seller for any technical assistance or troubleshooting specific to this logic board.
- Returns/Exchanges: Adhere to the seller's return and exchange policies.