Introduction
This user manual is designed to help you understand the features and functions of your new ebike battery box. Please read it carefully before installation and use to ensure optimal performance and safety.
Image: Overview of the Duotts C29 HL Hailong Ebike Battery Box, showing the main case, keys, and base components.
Setup and Installation
Before installing the battery (not included) into the box, ensure you understand the connection requirements.
- Check Polarity: Verify that the positive (+) and negative (-) positions of your new battery cells match the requirements of the battery box.
- Insulate Wires: When connecting battery wires, ensure they are connected separately and are well insulated to prevent short circuits.
Image: Illustration of a 4-pin battery base correctly fitting into a 4-pin discharging port.
Discharging Port Options
The battery box typically comes with a 4-pin discharging port by default. If your setup requires a 5-pin port, please contact the seller for customization.
Image: Top-down view comparing the 4-pin (default) and 5-pin discharging ports on the battery box base.
Discharge Plug Customization
If your battery purchase includes the base, you can choose the plug type for the base output cable. Customization options are available.
Image: Examples of various discharge plug types: T-plug, Big Anderson, IEC plug, Anderson, XT60, XT90, Small Bullet, Big Bullet.
Operating Instructions
Charging the Battery
Follow these steps to charge your ebike battery using the appropriate charger:
- Upon receiving the battery, it requires an initial charge before use, as it is shipped at a low voltage for safety.
- First, connect the AC plug end of the charger to a wall outlet.
- Then, connect the charger connector to the battery box's charging port.
- The charger's LED light will turn red, indicating that the battery is charging.
- Once the battery is fully charged, the charger's LED indicator will turn green.
- After the LED turns green, disconnect the charger: first unplug the AC plug from the wall, then disconnect the charger connector from the battery box.
- If storing the battery after receiving it, charge it for approximately 2 hours. Before subsequent use, ensure it is fully charged.
Charging Temperature: The battery should be charged within a temperature range of 0°C to 45°C. Do not attempt to charge below 0°C.
Charger Voltage: Some 4A or larger chargers may require adjustment to 110V or 220V depending on your local power supply.
Image: Key features of the battery box: 1. Power Switch, 2. Charging Hole, 3. Battery Level Light, 4. Discharge Socket, 5. Safe Lock.
Battery Level Indicator
The battery level light provides an approximate indication of the remaining power:
- Led5: 100% Power
- Led4: 75% Power
- Led3: 50% Power
- Led2: 25% Power
- Led1: 0% Power
Product Overview Video
Video: A brief overview demonstrating the physical aspects and features of the Duotts C29 HL Hailong Ebike Battery Box.
Maintenance
Proper maintenance ensures the longevity and performance of your battery box:
- Cleanliness: Keep the battery box dry, clean, and tidy. Moisture and stains can lead to aging, oxidation, and short circuits of internal components.
- Charging Habits: Recharge the battery before it gets too low to prevent excessive discharge. It is recommended to recharge when the power is less than 25% (indicated by one red and one green LED on the power display, or one red LED only when on load).
- Operating Temperature: The optimal operating temperature range for the battery is -20°C to 60°C.
- Storage Temperature: Store the battery within these temperature ranges:
- 1 year: -20°C to 25°C
- 3 months: -20°C to 45°C
- 1 month: -20°C to 60°C
- Long-Term Storage: If the battery is not used for an extended period, charge it for a minimum of 2 hours every 3 months.
- Transport: When transporting the battery, ensure it is at a low power level, preferably 30% or less, for safety.
Safety and Troubleshooting
Adhere to the following warnings to prevent damage and ensure safety:
- Do not short circuit the positive and negative terminals of the battery.
- Avoid extreme temperatures: Do not expose the battery to heat, direct sunshine, fire, or cold environments.
- Keep away from liquids: Do not place the battery in water, salt, acidic, or alkaline liquids, and avoid getting it wet in rain.
- Warranty Void: Disassembling the battery case will void the warranty.
- Charger Compatibility: Only use the licensed matching charger for this battery.
- Do not reverse the position of positive and negative terminals.
- Do not connect the battery electrodes to an electrical outlet.
- Do not discard the battery in fire or a heater.
- Do not directly connect the positive and negative terminals with metal objects.
- Do not transport or store the battery together with metal objects such as hairpins, necklaces, etc.
- Do not strike, trample, or throw the battery.
- Do not directly solder the battery and pierce the battery with a nail or other sharp objects.
Specifications
| Feature | Detail |
|---|---|
| Product Type | Ebike Battery Box (Empty) |
| Origin | Mainland China |
| Compatibility | For 36V, 48V, 52V Ebike Systems |
| Key Mechanism | With 2 Keys and Lock |
| Installation | Includes Installation Screw |
| Plug Customization | Accept Custom |
| Wire Length Customization | Accept Custom As You Need |
| Battery Chemistry | Li(NiCoMn)O2 (Lithium-ion) |
| Cycle Life | 800-1000 times |
| Charge Temperature Range | 0°C to 45°C |
| Discharge Temperature Range | -20°C to 65°C |
| BMS Features | SEIKO IC BMS with Over-Charging, Over-Discharging, Over-Current, Short Circuit, High Temperature safety protection. |
| Package Length | 43 cm |
| Package Width | 22 cm |
| Package Height | 14 cm |
| Package Weight | 1.15 kg |
Battery Case Dimensions
The battery box is available in several case types with varying dimensions:
Image: Diagram showing dimensions for Case 1 (390mm x 95mm x 94mm), Case 2 (390mm x 94.8mm x 105.6mm), and Case 3 (390mm x 94.8mm x 123.8mm without base).
Cell Configurations
The battery box is designed to accommodate different cell types and quantities:
Image: Diagrams illustrating cell configurations: 18650-52PCS (324mm length) and 21700-30PCS (327.5mm length).
Warranty and Support
All e-bike batteries come with a 12-month quality warranty.
For further assistance or inquiries, please contact Shenzhen Ding Tai Battery Co.Ltd:
- Website: www.dtbattery.com
- Phone: 86-0755-21013857
- Email: sales@dtbattery.com
A detailed user manual in PDF format is also available for download: User Manual (PDF)
User Tips
- If you require a specific discharge plug for your battery base, please contact the seller for customization options.
- For 5-pin configurations, ensure you communicate this requirement to the seller as the default is 4-pin.
- You have the option to purchase the battery box with or without a charger. If you need a charger, please confirm with the seller.
- Battery cell types and configurations can be customized to meet your specific needs.
Frequently Asked Questions (FAQ)
- Q: What type of electric bike battery is this?
- A: The chemical composition of our Li-ion battery is Li(NiCoMn)O2.
- Q: What is the cycle life of a Li-ion battery?
- A: E-bike Li-ion batteries have a longer cycle life (800-1000 times), are lightweight, and small in size. They have no memory effect, are non-toxic, and environmentally friendly.
- Q: What's the temperature range for charge and discharge?
- A: Charge Temperature: 0°C to 45°C and Discharge Temperature: -20°C to 65°C.
- Q: What kind of cells are used in the battery?
- A: Different capacities use different cells. We build batteries with original A-grade Samsung, Panasonic, Sanyo, LG, and high-quality domestic cells. All can be customized as per your requests.
- Q: Does the battery come with a charger?
- A: You can purchase both the battery and charger together, or only the battery without a charger to save money. If you need a charger, please contact us.
- Q: Do the batteries include a BMS?
- A: Yes, our batteries all come with SEIKO IC BMS, ensuring stable performance. This protects the battery from short circuits, overcharging, over-discharging, and overcurrent.
- Q: Do all batteries come with a quality warranty?
- A: Yes, we provide a 12-month warranty for all e-bike batteries.
- Q: How long will it take to send out my battery?
- A: E-bike batteries are typically sent out within 7 business days after the order is confirmed. Shipping usually takes 3-15 working days, depending on quantity and the specific battery model.
- Q: Can you provide OEM and ODM service?
- A: Yes, we are a professional manufacturer producing all kinds of high-quality E-bike Lithium batteries according to customers' requirements and designs.