Introduction
This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your Baseus Bass BC1 Lite Open Ear Earbuds. Please read this guide thoroughly to ensure optimal performance and longevity of your device.
Package Contents
Ensure all items are present in your package:
- Baseus Bass BC1 Lite Open Ear Earbuds (L&R)
- Charging Case
- Quick Start Guide
- Safety Instructions
- User Manual (PDF, available online)
Setup
1. Wearing the Earbuds
Proper wearing ensures optimal sound quality and comfort.
- Place the left and right earbuds onto the corresponding ears.
- Ensure the open-ring joint of the earbuds is positioned horizontally.
- Adjust slightly up or down for the best fit and comfort.
2. Pairing
The earbuds support both quick pairing and manual pairing.
Quick Pairing (First-time use):
- Remove the insulation stickers from the earbuds.
- Place the earbuds back into the charging case.
- Open the lid of the charging case; the earbuds will automatically enter pairing mode.
- Turn on Bluetooth on your device and select "Baseus Bass BC1 Lite" from the available devices.
Manual Pairing:
- With the charging case lid open, press and hold the case button for approximately 3 seconds.
- The earbuds will emit a prompt tone, indicating they are in pairing mode.
- Turn on Bluetooth on your device and select "Baseus Bass BC1 Lite" to connect.
*Once connected, the earbuds will automatically reconnect to the last paired device when powered on.
3. Multipoint Pairing
The earbuds support connecting to two devices simultaneously. If Device A is already connected:
Method 1 (Using Baseus App):
- Open the Baseus app and navigate to the earbud device page.
- Enable "Dual-Device Connection" and then tap "Connect New Device".
- On Device B, select the earbuds from the Bluetooth device list to connect.
Method 2 (Without App):
- Ensure "Dual-Device Connection" is enabled in the Baseus app (if previously set up).
- On Device B, turn on Bluetooth and select the earbuds from the device list.
*Once connected, the earbuds will automatically reconnect to both devices when powered on.
Operation
2. Using the Baseus App
Unlock more features and personalize your listening experience with the Baseus App.
Features available via the app include:
- Adjusting EQ settings (7 preset profiles and custom tuning).
- Activating SuperBass 2.0.
- Enabling Low-Latency modes (Baseus Dual Channel Low-Latency Technology - DCLL).
- Earbud Location feature.
- Call-to-Find feature.
Maintenance
1. Charging
Ensure your earbuds and charging case are always powered for uninterrupted use.
Charging the Earbuds:
- Place the earbuds into the charging case.
- The indicator lights on the case will show the battery status of the earbuds:
- < 20%: Red light
- < 40%: Yellow light
- ≥ 40%: Green Light
Charging the Case:
- Connect the charging case to a power source using a USB-C cable.
- The indicator light on the case will pulse during charging.
- When fully charged, the indicator light will turn solid green.
*Note: A USB-C cable is not included to reduce electronic waste.
*The power delivered by the charger must be between a minimum of 2.5 Watts and a maximum of 5 Watts to achieve maximum charging speed.
2. Water Resistance
The earbuds are IP55 water-resistant, making them suitable for workouts and light rain.
*The IP55-rated protection applies to the earbuds only, while the charging case features standard protection.
3. Cleaning
To maintain optimal performance and hygiene, regularly clean your earbuds and charging case.
- Use a soft, dry, lint-free cloth to wipe the earbuds and charging case.
- Avoid using abrasive materials, solvents, or aerosol sprays.
- Do not submerge the earbuds or charging case in water.
Troubleshooting
1. Factory Reset
If you experience persistent issues, a factory reset may resolve them.
- Disconnect the earbuds from all paired devices.
- Take the earbuds out of the charging case.
- Press and hold the buttons on both earbuds simultaneously for approximately 8 seconds.
- You will hear a tone indicating that the reset is complete. This action will also restore app settings to their default values.
2. Common Issues & Solutions
- Earbuds not pairing: Ensure earbuds are charged, Bluetooth is on, and they are in pairing mode. Try manual pairing or factory reset.
- No sound: Check volume levels on both earbuds and connected device. Ensure earbuds are properly seated in your ears.
- Poor call quality: Ensure earbuds are worn correctly. Check for environmental noise.
- App not connecting: Ensure Bluetooth is enabled and the app is updated. Try restarting the app or your device.
Specifications
| Feature | Specification |
|---|---|
| Model No. | A0102M |
| Brand Name | BASEUS |
| Material | ABS, Plastic |
| Weight (per earbud) | 4.8g |
| Communication | True wireless (Bluetooth) |
| Bluetooth Version | Other (Bluetooth 6.0 mentioned in images) |
| Wireless Range | <10m |
| Battery Life (up to) | 45Hr (with charging case) |
| Charging Method | Charging case (USB-C) |
| Frequency Response Range | 20 - 20000 Hz |
| Waterproof Rating | IP55 (earbuds only) |
| Microphone | Yes (Dual-Mic AI Clear Calls) |
| Support APP | Yes |
| Certification | CE, RoHS |
Warranty & Support
Warranty:
- 24-Month Warranty: Your Baseus Bass BC1 Lite earbuds are covered by a 24-month warranty from the date of purchase.
- Lifetime Tech Support: Baseus provides lifetime technical support for this product.
Contact Us:
- Email: care@baseus.com
- Website: www.baseus.com (Global)
- Support Center: For FAQs and more information, please visit https://www.baseus.com/pages/support-center
- Phone (US): +1 800 220 8056
Additional Resources:
A PDF version of the user manual is available for download: User Manual (PDF)
User Tips
- Comfortable Fit: Users appreciate the secure and comfortable fit, especially for those who find in-ear earbuds difficult to use. Take time to adjust the open-ring joint for the best experience.
- Physical Buttons: The physical control buttons are well-received for their ease of use. Familiarize yourself with the single, double, and triple press functions for music and calls.
- App Customization: Don't forget to explore the Baseus App for personalized EQ settings and other features like SuperBass 2.0 and Low-Latency mode to enhance your audio experience.
- Battery Life: With up to 45 hours of playtime with the charging case, these earbuds are great for extended use. Remember to charge the case regularly using a USB-C cable.