1. Introduction
Thank you for choosing the QCY AilyBuds E50 HT11 Wireless Earphones. These semi-in-ear active noise-canceling earbuds offer a high-resolution audio experience with adaptive hybrid ANC, Bluetooth 6.0, spatial sound, and powerful 11mm drivers. This manual provides detailed instructions on how to set up, operate, maintain, and troubleshoot your new earphones to ensure optimal performance and longevity.

2. What's in the Box
Please check the contents of your package:
- QCY AilyBuds E50 Earphones
- Charging Case
- User Manual (this document)
- Type-C Charging Cable

3. Product Diagram
Familiarize yourself with the components of your QCY AilyBuds E50:

- Tuning Outlet: For sound optimization.
- Sound Outlet: Where audio is emitted.
- MIC: Microphone for calls and voice commands.
- Charging Contactor: Connects with the charging case for power.
- Indicator: LED light for status indications.
- Touch Panel: For controlling music, calls, and other functions.
- Charging Case Button: Used for pairing and factory reset.
- Type-C Charging Port: For charging the case.
4. Setup
4.1. Earbuds Pairing (First-Time Use)
- Open the charging case and remove the earbuds. Peel off the protective film from the charging contacts on both earbuds.
- Place both earbuds back into the charging case and close the lid.
- Take the earbuds out again. They will automatically enter pairing mode.
- Turn on Bluetooth on your smartphone. Refresh the Bluetooth device list.
- Select "QCY AilyBuds E50" from the available devices to connect.
- After the first successful pairing, the earbuds will automatically reconnect to your device during subsequent uses.
Note: The earbuds power on automatically when the case opens. If they don’t, recharge and retry.
4.2. How to Fit
- Identify the left (L) and right (R) earbuds.
- Insert each earbud into the canal of your respective ear.
- Adjust the earbuds so the microphones are pointing towards your mouth.
- Turn and find the most comfortable and secure position.
Important: If the earbuds are not worn correctly, it may affect sound quality and hearing. If the fit is not snug enough, the ANC (active noise cancellation) effectiveness may decrease. Try adjusting the wearing angle and direction before reactivating the adaptive noise cancellation mode.

4.3. Multipoint Connection
The multipoint connection feature allows the earbuds to connect to two devices simultaneously. This feature is disabled by default and needs to be enabled in the QCY app.
- Open the QCY app and enable the "Dual Device Connection" feature in the settings.
- Connect the earbuds to Device A. Once connected, turn off Bluetooth on Device A. The earbuds will enter pairing mode again.
- Turn on Bluetooth on Device B and connect the earbuds by selecting "QCY AilyBuds E50".
- Turn Bluetooth back on for Device A and tap the earbuds to reconnect. Now you're connected to both devices.
5. Operating Your Earphones
5.1. Power On/Off
- Power On: Open the charging case, and the earbuds will power on automatically. If the earbuds power off due to inactivity when outside the charging case, press and hold the touch panel for 1.5 seconds to turn them on.
- Power Off: Place the earbuds back into the charging case. Close the case, and the earbuds will automatically power off.
5.2. Controls
The QCY AilyBuds E50 feature intuitive touch controls:

| Function | Action | Earbud |
|---|---|---|
| Play/Pause Music | Double Tap | L/R (or take off any earbud to pause) |
| Next Track | Triple Tap | R |
| Previous Track | Triple Tap | L |
| Answer/End Call | Double Tap | L/R |
| Reject Call | Long press for 1.5s | L/R |
| Activate Voice Assistant | Long press for 1.5s | L |
| ANC/Transparency Mode Toggle | Long press for 1.5s | R |
5.3. Indicator Behavior
- Power On: White light flashes once.
- Power Off: Red light flashes once.
- Battery Indication (Charging Case connected via USB):
- 90%-100%: White light stays on.
- 89%-30%: White light flashes slowly.
- 29%-5%: Red light flashes slowly.
- <5%: Red light flashes rapidly.
- Battery Indication (Earbuds in/out of case, or button click):
- ≥30%: White light stays on for 3 seconds.
- <30%: Red light stays on for 3 seconds.
- Pairing Mode: Red and white lights on the charging case alternate flashing for 10 seconds.
5.4. Smart Wearing Detection
The earbuds feature smart wearing detection. Music automatically pauses when you remove an earbud and resumes instantly when you put it back on.

5.5. QCY App Features
Enhance your experience by downloading the QCY app. Scan the QR code in the user manual or search "QCY" in your app store. The app allows you to access various settings and customizations:
- Sound Effects Customization (EQ settings)
- Noise Cancellation Modes (Adaptive ANC, Transparency, Normal)
- Control Configuration (customize touch controls)
- Smart Wear Detection toggle
- Gaming Mode
- Sleep Mode toggles
- Find My Earbuds
- Firmware Updates

6. Maintenance
- If the product is not used for an extended period (more than 2 weeks), please recharge it.
- Do not use oil or other volatile liquids to clean the product.
- Keep the charging contacts clean and free of debris to ensure proper charging.
- Store the earbuds and charging case in a cool, dry place away from extreme temperatures.
7. Troubleshooting
7.1. Common Issues & Solutions
- Earbuds cannot pair with mobile phone:
- Check if your earphone is in pairing mode or re-connection mode.
- Ensure Bluetooth search function of your device is turned on.
- Go to Bluetooth menu of your device, delete/ignore the earphone Bluetooth pairing name, then try to reconnect.
- Connection is not stable and cuts out intermittently:
- Check for metal materials or obstacles nearby that may interfere with Bluetooth connection. Bluetooth is sensitive to objects between the earphone and other devices.
- If there are many Wi-Fi, 5G/4G signals, or high-power electrical appliances around, it may cause stuck and intermittent sound. Change the environment or re-pair the earbuds.
- Only one earphone produces sound:
- Place both earphones into the charging case, close the case, and take them out to check if both produce sounds.
- If the issue persists, perform a factory reset (see Section 8).
- Delay in video watching or game playing:
- Affected by factors such as environment, network, and mobile phone codec, there may be varying degrees of delay.
- The earbuds feature 68ms Ultra-Low Latency for smoother gaming and video sync. Ensure Gaming Mode is enabled in the QCY app if available.
- Earphone cannot turn on:
- Recharge the earbuds and ensure the charging case has enough battery power.
- If fully charged and still unresponsive, or if unable to charge, contact customer support.
- No sound when listening to music/calling (Android phones):
- On Android phones, click the settings icon next to the Bluetooth connection name. Turn off and then turn on mobile phone audio and media audio. If no sound, re-pair the earphones.
8. Factory Reset
If you encounter persistent connection issues or other malfunctions, performing a factory reset may resolve the problem:
- Place both earbuds back into the charging case and open the lid.
- Press and hold the charging case button for 10 seconds.
- The red and white lights on the charging case will alternate flashing for 3 seconds, indicating a successful reset.
- After the reset, apply the first-time pairing method to reconnect your earbuds.
9. Specifications
| Attribute | Value |
|---|---|
| Product Name | QCY AilyBuds E50 |
| Material | Metal, PC, ABS |
| Weight | 150g |
| Battery Capacity (Earbuds) | 40mAh |
| Battery Capacity (Case) | 450mAh |
| Battery Life (Single Playtime) | Up to 9 hours (ANC OFF), 6 hours (ANC ON) |
| Total Playtime (with Case) | Up to 40.5 hours (ANC OFF), 31.5 hours (ANC ON) |
| Bluetooth Version | 6.0 |
| Bluetooth Profiles | HFP/A2DP/AVRCP |
| Compatible Systems | iOS / Android |
| Bluetooth Range | 10m |
| Water Resistance Rating | IPX5 |
| Charging Port | Type-C |
| Driver Diameter | 11mm |
| Frequency Response Range | 20 - 20000Hz |
| Sensitivity | 103dB |
| Impedance Range | Up to 32 Ω |
| Codecs | SBC, LDAC |
| Active Noise-Cancellation | Yes |
| Voice Assistant Built-in | No (but can be activated) |

10. User Tips
- For optimal bass and ANC performance, ensure a snug fit. Adjust the wearing angle and direction if needed.
- The QCY app offers extensive customization for EQ and touch controls, allowing you to tailor the listening experience to your preferences.
- If you experience sound issues, try a factory reset as a first step.
- Be mindful of your surroundings when using transparency mode, and adjust the amplification level in the app if it feels too high.
- Consider the trade-off between ANC ON and ANC OFF for battery life, especially during long listening sessions.
11. Safety Information
Please read and follow these safety instructions carefully:
- Recharge the product if it's not used for an extended period (more than 2 weeks).
- Use only chargers produced by legitimate manufacturers and certified by national safety authorities.
- Do not disassemble or modify the battery, insert foreign objects, expose it to high temperatures, or immerse it in water or other liquids to prevent battery leakage, overheating, ignition, or explosion. Battery replacement should only be done by the manufacturer.
- Do not drop, crush, or puncture the battery. Prevent external pressure that may lead to internal short circuits and overheating.
- Do not dismantle or modify the product for any reason, as it may result in fire, electronic breakdown, or permanent damage.
- Do not expose the product to extremely low or high temperatures (below 0°C or above 45°C).
- Do not point the product indicator light near the eyes of children or animals.
- Do not use the product during thunderstorms, as it may cause abnormal operation and increase the risk of electric shock.
- Do not use oil or other volatile liquids to clean the product.
- Avoid prolonged exposure to loud noise and keep the volume at an appropriate setting to prevent temporary or permanent hearing damage or hearing loss.
12. Warranty & Support
12.1. Warranty Period
QCY products come with a 12-month warranty period from the date of delivery.
12.2. How to Claim Warranty
- Online purchase: Please contact the customer service of the purchase channel/platform. QCY service support will provide technical assistance.
- Offline purchase: Please contact the store/distributor or agent directly for after-sale assistance.
12.3. Valid Proof of Purchase
- Products purchased online: Provide order number or information clearly showing the sales channel, product details, price, and sales date.
- Products purchased from non-official channels: Provide sales store information, order number, or product information evidence confirmed by the QCY service team.
12.4. Not Covered under Warranty
The manufacturer's warranty is void under the following circumstances (but not limited to):
- Lost, stolen, or free products.
- Items that have expired their warranty period.
- Products without sufficient proof of purchase.
- Improper or inadequate maintenance or modification.
- Accident, misuse, abuse, contamination, or other external causes.
- The use of unspecified adapter and accessories.
- Malfunctions or damages resulting from natural disasters, earthquakes, lightning, abnormal voltage, or environmental factors.
- Damages that occur as a result of one's failure to follow the instructions.
12.5. Contact Details
For FAQs and more information, please email to support@qcymall.com or visit www.qcy.com.
For more languages, please visit https://www.qcy.com/pages/support-center.
Manufacturer: Dongguan Hele Electronics Co., Ltd
Address: Room 101, Block 1, No.38, Daojiao Daohou Road, Daojiao Town, Dongguan City, Guangdong Province, China
13. Operation Video
Watch this video for a visual guide on how to operate your QCY AilyBuds E50, including pairing, dual device connection, ANC toggle, music controls, call controls, voice assistant, factory reset, and app usage.
14. PDF User Manual
A detailed user manual in PDF format is available for download. You can access it directly via this link: QCY AilyBuds E50 User Manual (PDF).