1. Introduction
Thank you for choosing the DUOTTS E26 Electric Bike. This manual provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your new e-bike. Please read this manual thoroughly before your first ride and keep it for future reference. Proper understanding and adherence to these instructions will ensure a safe and enjoyable riding experience.

2. Safety Information
Your safety is paramount. Please observe the following safety guidelines:
- Always wear a helmet and appropriate protective gear while riding.
- Familiarize yourself with local laws and regulations regarding electric bicycles and always comply with them.
- Perform a pre-ride inspection before each use, checking brakes, tire pressure, and battery level.
- Be aware of your surroundings and ride defensively, especially in traffic.
- Exercise caution when riding in wet conditions, at night, or in low visibility.
- Fire Risk: Please mind potential fire risk and strictly follow the instruction manual for charging and storage of the battery.
- Do not exceed the maximum load capacity of 150 kg.
3. Specifications
The DUOTTS E26 is a robust electric mountain bike designed for various terrains.
| Feature | Specification |
|---|---|
| Model Number | E26 |
| Brand Name | DUOTTS |
| Motor | 750W BAFANG Brushless Motor (80Nm Torque) |
| Max Speed | <25km/h (unlockable) |
| Battery | 48V 20Ah (960Wh) Samsung 21700 Lithium Battery |
| Pure Electric Range | 40-60 KM |
| Assist Mode Range | 100-120 KM |
| Charging Time | 6-8 Hours |
| Battery Waterproof Rating | IPX4 |
| Brakes | TEKTRO Four-Piston Hydraulic Disc Brakes (180mm rotors) |
| Suspension | Full Suspension (Front & Rear) |
| Tires | 26 x 4.0 inch Fat Tires |
| Gearing | Shimano 8-Speed Shifting |
| Frame Material | Aluminum Alloy |
| Rated Passenger Capacity | One Seat |
| Max Load | 150 KG |
| Recommended Rider Height | 170-200 CM |
| Certification | CE |

4. Setup & Assembly
Your DUOTTS E26 Electric Bike comes partially assembled. Follow these steps to complete the assembly:
- Unpacking: Carefully remove all components from the packaging. Retain packaging for future transport or storage.
- Handlebar Installation: Attach the handlebars to the stem, ensuring they are centered and tightened securely.
- Front Wheel Installation: Install the front wheel, ensuring the disc brake rotor is correctly seated within the caliper. Secure the quick-release skewer or axle nuts.
- Pedal Installation: Identify the left (L) and right (R) pedals. The left pedal tightens counter-clockwise, and the right pedal tightens clockwise. Ensure they are fully tightened.
- Seat Post & Saddle: Insert the seat post into the frame and adjust the saddle height for comfortable riding. Secure the quick-release clamp.
- Battery Insertion: Ensure the battery is correctly inserted into the frame and locked securely.
- Pre-Ride Checks: Before your first ride, double-check all bolts, nuts, and quick releases for tightness. Verify brake function and tire pressure.


5. Operating Instructions
Operating your DUOTTS E26 is intuitive, but understanding its features will enhance your ride.
5.1 Powering On/Off
- To power on the bike, press and hold the power button on the display unit.
- To power off, press and hold the power button again until the display turns off.
5.2 Display Functions
The integrated display provides real-time information about your ride.

- Speed: Current riding speed.
- Mileage: Total distance traveled.
- Battery Level: Indicates remaining battery charge.
- Assist Level: Adjust pedal assist levels using the '+' and '-' buttons.
- APP Function: Scan the QR code on the display to download the companion app for additional features and settings.
5.3 Riding Modes
- Pedal Assist Mode: The motor provides assistance as you pedal. Adjust the assist level to control the amount of power.
- Pure Electric Mode: Use the throttle (if equipped) for motor power without pedaling. The maximum speed in this mode is 25 km/h (unlockable).
- Manual Mode: Ride the bike like a traditional bicycle without motor assistance.
5.4 Gear Shifting
The Shimano 8-speed shifting system allows you to select appropriate gears for different terrains and speeds. Use the shifters on the handlebars to change gears smoothly.
5.5 Braking
The TEKTRO four-piston hydraulic disc brakes provide powerful and responsive stopping power. Squeeze both brake levers gently and evenly to slow down or stop. Avoid sudden, hard braking, especially at high speeds or on loose surfaces.
6. Battery Charging & Care
Proper battery care is crucial for longevity and performance.
- Charging: Connect the charger to the bike's charging port and then to a power outlet. The charging indicator on the charger will show the charging status. A full charge typically takes 6-8 hours.
- Do not overcharge: Disconnect the charger once the battery is fully charged to prevent damage.
- Storage: When storing the bike for extended periods, ensure the battery is charged to 50-70% and store it in a cool, dry place. Recharge every 1-2 months to maintain battery health.
- Water Resistance: The battery has an IPX4 waterproof rating, meaning it is resistant to splashing water from any direction. Avoid submerging the battery or exposing it to heavy rain for prolonged periods.
- Safety: Only use the original charger provided with your DUOTTS E26. Do not attempt to open or modify the battery pack.
7. Maintenance
Regular maintenance will keep your DUOTTS E26 in optimal condition.
7.1 Daily Checks
- Check tire pressure (refer to tire sidewall for recommended PSI).
- Inspect brakes for proper function and wear.
- Ensure all quick releases and fasteners are tight.
- Verify battery charge level.
7.2 Weekly/Monthly Checks
- Clean the bike frame with a damp cloth. Avoid high-pressure washing directly on electrical components.
- Lubricate the chain with appropriate bicycle chain lubricant.
- Check brake pads for wear and replace if necessary.
- Inspect suspension components for smooth operation and adjust if needed.
- Ensure all electrical connections are secure and free from corrosion.
7.3 Professional Servicing
It is recommended to have your e-bike professionally serviced at least once a year, or more frequently if you ride often or in challenging conditions.
8. Troubleshooting
Here are some common issues and their potential solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Bike does not power on | Battery low or not inserted correctly; loose connection | Charge battery; ensure battery is fully seated and locked; check all cable connections. |
| Motor not assisting | Pedal assist level set to zero; brake levers engaged; sensor issue | Increase assist level; release brake levers; check for error codes on display. |
| Brakes feel weak | Worn brake pads; air in hydraulic line; misaligned caliper | Inspect and replace brake pads; consult a bike mechanic for hydraulic system bleeding or caliper adjustment. |
| Unusual noises | Loose components; dry chain; rubbing parts | Check all fasteners; lubricate chain; identify and adjust rubbing components. |
For persistent issues, please contact customer support.
9. User Tips
While no specific user reviews or Q&A were provided, here are some general tips for enhancing your e-bike experience:
- Tire Pressure: Experiment with tire pressure within the recommended range to find the best balance of comfort and efficiency for your riding style and terrain. Lower pressure offers more grip and comfort on rough trails, while higher pressure is faster on smooth roads.
- Gear and Assist Coordination: Use your gears in conjunction with pedal assist levels. Shifting to a lower gear on inclines will make climbing easier, even with motor assistance, and reduce strain on the motor and battery.
- App Connectivity: Utilize the DUOTTS E26 companion app (available via QR code on the display) to monitor ride data, adjust settings, and potentially update firmware for optimal performance.
- Security: Always secure your e-bike with a high-quality lock when unattended, even for short periods. Consider additional security measures like GPS trackers.
10. Warranty & Support
For warranty information, technical support, or service inquiries, please refer to the documentation provided at the time of purchase or contact your retailer. Keep your proof of purchase handy when contacting support.