1. Introduction
Thank you for choosing the Baseus PicoGo AM52 Qi2.2 Slim Magnetic Power Bank. This device is designed to provide efficient and versatile charging for your mobile devices, featuring both 25W Qi2.2 wireless charging and 45W USB-C wired charging, all within a compact 10000mAh capacity. Please read this manual carefully to ensure proper use and optimal performance.
Video: Overview of the Baseus PicoGo AM52 Power Bank's features and sleek design.
2. Package Contents
Please check the package for the following items:
- Baseus PicoGo AM52 Qi2.2 Slim Magnetic Power Bank x 1
- Quick Start Guide x 1
- Safety Card x 1
- 60W Type-C to Type-C Cable x 1 (approx. 30cm / 0.98ft)

Image: The Baseus PicoGo AM52 Power Bank in its retail packaging.
3. Parts Overview
Familiarize yourself with the different parts of your power bank:

Image: Labeled diagram showing the components of the power bank.
- Battery Indicator
- Wireless Charging Indicator
- USB-C Port (Input/Output)
- USB-C Cable (for models with built-in cable)
- Power Button
- Wireless Charging Area
4. Setup
4.1 Initial Charging
Before first use, fully charge your power bank. Connect the included USB-C to USB-C cable to the power bank's USB-C port and a compatible power adapter (not included). The power bank supports 30W fast recharging, allowing it to be fully charged in approximately 1.5 hours.

Image: The power bank being recharged via its USB-C port, showing 1.5 hours for a full charge.
4.2 Power On/Off
To power on the device or activate low current mode, press the power button once. To power off, press and hold the power button.

Image: Instructions for using the power button: single press for power on/low current mode, double press for low current mode on/off, press and hold for power off.
5. Operating Instructions
5.1 Magnetic Wireless Charging
Align your Qi2.2 compatible device with the wireless charging area (marked with the Qi2.2 logo) on the power bank. The magnets will snap into place, and charging will begin automatically. The wireless charging indicator will illuminate. This power bank supports up to 25W wireless charging.

Image: A smartphone magnetically attached to the power bank, indicating wireless charging.
For optimal wireless charging performance, ensure your device is properly aligned and any phone cases are compatible with magnetic charging.

Image: Demonstrates charging an iPhone 17 Pro to 50% in 34 minutes using 25W Qi2.2 wireless charging.
5.2 Wired Charging
Connect your device to the power bank's USB-C port using a compatible USB-C cable. The power bank supports up to 45W wired charging via its USB-C port.

Image: A smartphone being charged via a USB-C cable connected to the power bank.
You can charge two devices simultaneously: one wirelessly and one via the USB-C port.

Image: The power bank charging two devices at once: one wirelessly and one via USB-C.

Image: Demonstrates charging an iPhone 17 Pro Max to 65% in 30 minutes using 45W USB-C wired charging.
6. Specifications

Image: Detailed product specifications including dimensions and outputs.
| Attribute | Value |
|---|---|
| Name | PicoGo AM52 Qi2.2 Slim Magnetic Power Bank |
| Total Capacity | 10,000mAh |
| Battery Type | Lithium Ion Battery |
| Material | Silicone, Aluminium Alloy |
| Color | Cosmic Black |
| Wireless Charging Output | 25W Max |
| USB-C Wired Output | PD 45W Max (5V-3A; 9V-3A; 12V-3A; 15V-3A; 20V-2.25A; 10V-2.25A) |
| USB-C Wired Input | 30W Max (5V-3A; 9V-3A; 12V-2.5A; 15V-2A) |
| Dimensions | 103 x 66 x 15 mm (approx. 4.06 x 2.6 x 0.6 in) |
| Weight | 195g (without package), approx. 6.95 oz |
| C-C Cable Length (Accessory) | 30 cm (approx. 0.98 ft) |
| Certifications | Qi2.2, FCC, CE, UL, RoHS, UN38.3, pse |
| Features | Wireless Charge, With LED Lamp, Two-way Quick Charge |
| Operating Temperature | Non-tropical area, 0°C to 30°C (32°F to 86°F) |
| Storage Temperature | 0°C to 40°C (32°F to 104°F) |
| Frequency Range (Radiated H-Field) | 110.5kHz-148.5 kHz: -6.84dBμΑ/m@10m; 360 kHz: -19.02 dBµA/m@10m |

Image: Chart detailing universal compatibility for various devices with wireless and wired charging.

Image: Comparison table for Qi2.2 25W, Qi2 15W, and Qi 7.5W wireless charging standards.
7. Maintenance
- Keep the power bank dry and away from moisture.
- Clean the surface with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
- Avoid exposing the device to extreme temperatures (hot or cold) or direct sunlight.
- Store in a cool, dry place when not in use.
8. Troubleshooting
- Device not charging wirelessly:
- Ensure your device is Qi2.2 compatible and properly aligned with the wireless charging area. Thick phone cases or cases with metal components may interfere with wireless charging. Remove the case if necessary.
- Slow charging:
- Verify that you are using a compatible cable and power adapter that supports the required wattage (e.g., 30W for power bank input, 45W for wired output, 25W for wireless output). Ensure your device supports fast charging protocols.
- Power bank or device overheating:
- The power bank is designed with NTC temperature control, a graphene layer, and an aluminum alloy shell for efficient heat dissipation. Some heat generation during fast charging is normal. If excessive heat is detected, charging may slow down or stop automatically to prevent damage. Ensure proper ventilation and avoid charging in direct sunlight or confined spaces.
- Magnetic attachment issues with Samsung Galaxy S26 Ultra (or similar large camera phones):
- Due to the large camera bump on some phone models, the power bank may not attach perfectly. Consider using a compatible phone case with a built-in magnetic ring or a separate bidirectional magnetic ring to ensure a secure and stable connection.
9. User Tips
- The power bank features a soft, rubbery material that provides a good grip and a premium feel.
- Its compact and lightweight design makes it an excellent travel companion and suitable for daily commutes.
- While the power bank charges quickly, note that it uses indicator lights for battery level rather than a digital display.
- For models with a built-in USB-C cable, this offers convenient wired charging without needing an extra cable.
10. Warranty & Support
10.1 Warranty Information
This Baseus product comes with a 24-month warranty and lifetime technical support from the manufacturer.
10.2 Contact Information
If you encounter any issues or require assistance, please contact Baseus customer support:
- Email: care@baseus.com
- Global Phone Support (US): +1 800 220 8056
- Website: https://www.baseus.com/pages/support-center
10.3 Manufacturer Information
Manufacturer: Shenzhen Baseus Technology Co., Ltd.
Address: 2nd Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen, Mainland China
11. Safety Information
Please read and follow these safety guidelines to prevent injury or damage to your device:
- Do not disassemble, repair, or modify the product.
- Do not expose the product to fire, water, or extreme temperatures.
- Avoid dropping, hitting, or subjecting the product to strong impacts.
- Keep out of reach of children.
- Dispose of the product responsibly according to local regulations. Do not dispose of with household waste.
This device complies with relevant safety and environmental certifications, including Qi2.2, FCC, CE, UL, RoHS, UN38.3, and pse.

Image: Recycling symbols and instructions for proper disposal of electronic devices.