1. Product Overview
The Flysky MG11-BT-BS is an 11-channel 2.4Ghz 2A-BS Protocol Remote Control Transmitter designed for surface vehicles such as RC cars. It offers a compact, comfortable, and ergonomically designed solution for precise and hassle-free control. This transmitter is an ideal upgrade for various ready-to-run (RTR) models, including those from FMS, Hobby Plus, BSD Racing, HSP, and RiverHobby.

2. Setup and Initial Configuration
2.1 Battery Installation
The MG11-BT-BS transmitter supports both 4xAA batteries or a 7.4V (2S) LiPo battery. To install batteries:
- Locate the battery compartment cover on the bottom of the transmitter handle.
- Slide or unclip the cover to open the compartment.
- Insert 4xAA batteries, ensuring correct polarity (+/-) as indicated inside the compartment, or connect a compatible 7.4V (2S) LiPo battery.
- Close the battery compartment cover securely.
2.2 Receiver Compatibility and Binding
The MG11-BT-BS transmitter does not include a receiver unit. It is crucial to ensure that your vehicle's existing receiver is compatible with the 2A-BS protocol. Refer to your vehicle's owner manual for receiver specifications.
To bind the transmitter with a compatible receiver (general procedure):
- Ensure both the transmitter and receiver are powered off.
- Place the receiver in binding mode (this usually involves pressing a bind button while powering on the receiver, or inserting a bind plug). Consult your receiver's manual for specific instructions.
- Power on the transmitter while holding its bind button (if applicable), or activate binding mode through the transmitter's menu.
- Once the binding process is complete, the receiver's indicator light should show a solid connection.
- Power cycle both the transmitter and receiver to confirm the binding.
3. Operation
The Flysky MG11-BT-BS utilizes a 2.4GHz 2A-BS digital system and offers 11 output channels for comprehensive control of your RC vehicle. Its ergonomic design ensures comfortable handling during operation.

3.1 Basic Controls
- Steering Wheel: Controls the direction of the vehicle (left/right).
- Throttle Trigger: Controls forward/reverse movement and speed.
- LCD Screen: Displays current settings and parameters.
- Navigation Buttons (below LCD): Used to navigate menus and adjust values.
3.2 Advanced Functions and Adjustments
The transmitter features various adjustable parameters accessible via the LCD screen and control buttons:
- TRIM: Fine-tunes the neutral position of steering or throttle.
- D/R (Dual Rate): Adjusts the maximum steering angle or throttle response.
- EPA (End Point Adjustment): Sets the maximum travel for each channel.
- REV (Reverse): Reverses the direction of a channel's output.
- EXP (Exponential): Adjusts the sensitivity around the center of a channel's travel.
- F.SAFE (Fail-Safe): Configures the receiver's behavior in case of signal loss.
- ESC: Allows for adjustable Electronic Speed Controller parameters directly from the transmitter.
- 4WS (4-Wheel Steering): Specific settings for vehicles with 4-wheel steering.
- MODEL: Selects and manages different model profiles.
- CH7, CH8, CH11 Buttons: Control auxiliary channels for additional functions (e.g., lights, winches).
3.3 Bluetooth Mobile App Connection
The MG11-BT-BS supports Bluetooth connectivity, allowing you to connect to a mobile app for seamless tuning and precise control. Refer to the Flysky website or app store for the official application and detailed instructions on connecting and utilizing its features.
4. Maintenance
Proper maintenance ensures the longevity and optimal performance of your Flysky MG11-BT-BS transmitter.
- Cleaning: Regularly wipe the transmitter with a soft, dry cloth. Avoid using harsh chemicals or solvents that could damage the plastic or electronic components.
- Storage: Store the transmitter in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity. If storing for an extended period, remove the AA batteries to prevent leakage.
- Battery Care: If using rechargeable LiPo batteries, follow the manufacturer's guidelines for charging, discharging, and storage to ensure safety and battery life.
- Inspection: Periodically check for any loose connections, damaged wires, or physical damage to the casing or controls.
5. Troubleshooting
If you encounter issues with your transmitter, try the following troubleshooting steps:
- No Power:
- Check if batteries are correctly installed and fully charged.
- Ensure the power switch is in the 'ON' position.
- No Signal/Loss of Control:
- Verify that the receiver is compatible with the 2A-BS protocol.
- Re-perform the binding procedure between the transmitter and receiver.
- Ensure the transmitter and receiver are within operational range and free from interference.
- Check for any physical damage to the antenna on both the transmitter and receiver.
- Erratic Control:
- Check for potential radio interference from other 2.4GHz devices.
- Ensure all trim and EPA settings are correctly configured for your vehicle.
- Inspect the steering and throttle linkages on your vehicle for any obstructions or damage.
- LCD Screen Issues:
- If the screen is blank, check power supply.
- If display is garbled, try power cycling the transmitter.
If problems persist, consult the Flysky support resources or contact your retailer.
6. Specifications
| Feature | Specification |
|---|---|
| Brand | Flysky |
| Model | MG11-BT-BS |
| Band | 2.4GHz ISM |
| Protocol | 2A-BS |
| Channels | 11 |
| Input Voltage | 4xAA / (7.4V-2S) LiPo |
| Dimensions (LxWxH) | 135.7 x 189.1 x 82.7 mm (5.3 x 7.4 x 3.2 in) |
| Weight | 236g (8.32 oz) |
| Application | Surface Vehicles |
| Material | Plastic |
| Is Electric | No Battery (Transmitter itself is not electric, requires external power) |
| Batteries Included | No |
| Recommended Age | 14+ years |
7. User Tips
- Verify Receiver Compatibility: Always double-check that your RC vehicle's receiver supports the 2A-BS protocol before attempting to bind. This is a common point of confusion for new users.
- Utilize the Mobile App: Take advantage of the Bluetooth mobile app connection for advanced tuning and parameter adjustments. This can offer a more intuitive interface than the on-screen menu for complex settings.
- Experiment with Settings: The MG11-BT-BS offers extensive customization (D/R, EPA, EXP). Experiment with these settings in a safe environment to find the optimal control feel for your driving style and vehicle.
- Battery Management: Keep spare AA batteries or a charged LiPo battery on hand, especially for longer sessions, to avoid unexpected power loss during operation.
8. Warranty and Support
For warranty information, technical support, or service inquiries, please contact the retailer where you purchased the Flysky MG11-BT-BS transmitter or refer to the official Flysky website for their customer support resources. Keep your proof of purchase for any warranty claims.
