XSDTS Smart Door Lock Instruction Manual

1. Product Overview

The XSDTS DQ2 Smart Door Lock is a double-sided, waterproof digital electronic lock designed for various door types, including outdoor pull-push sliding and grille doors. It offers multiple unlocking methods and smart features via the Tuya App.

Key Features:

• 100% Waterproof (IP68 Protection Level)
• Anti-corrosion Aluminum Alloy Material
• Multiple Unlocking Methods: Fingerprint, Password, IC Card, Mechanical Key, Tuya App
• AI Fingerprint Algorithm for fast and accurate recognition
• High Security Super C Lock Core
• Hidden Mechanical Key for emergency access
• Built-in Doorbell and Camera (specific models)
• Supports USB emergency charging
• 8 National Languages for voice prompts

2. Package Contents

Before installation, please verify that all components are present:

Figure 1: Smart Lock Components

1. Front Panel
2. Rear Panel
3. Front Locking Rubber Pad
4. Rear Locking Pad
5. Rear Locking Spacer
6. Square Bar
7. Coil
8. Long Screw
9. Fasteners
10. Batteries (4x AA, not included)
11. Lock Body

3. Installation Guide

Please watch the installation video for a visual guide. Ensure you follow all steps carefully.

3.1. Door Opening Direction Adjustment

Before installation, check the actual door opening direction. If the lock's handle direction does not match, a reversal is required for both the front and rear panels.

1. For the Front Panel:
   1. Unscrew the reversing screw on the front panel.
   2. Turn the handle to the desired opening direction.
   3. Put the reversing screw back and tighten it.
2. For the Rear Panel:
   1. Unscrew the reversing screw on the rear panel.
   2. Turn the handle to the desired opening direction.
   3. Put the reversing screw back and tighten it.

Important: When installing the rear lock, the arrow marking and handle should be in the opposite direction to the front lock's handle.

3.2. Installing Pads and Solenoid

1. Install the Front Locking Rubber Pad onto the front panel.
2. Mount the solenoid into the front panel and tighten it with pliers.
3. Fit the Rear Locking Spacer with its corresponding rubber pad.

3.3. Preparing the Door

Figure 2: How to choose the right lock body

Figure 3: Mortise Lock Measurement Example

Measure your old mortise lock's three key data points (door thickness, width of strike plate, length of strike plate) to select the corresponding size. The lock supports various mortise sizes like 240x22 (6085), 240x22 (5085), 240x22 (4585), 240x22 (4085), 240x22 (3585), 240x22 (3085), SG-270x22 (3585), SG-270x22 (2885), 240x22 (7085).

3.4. Installing the Lock Body and Panels

1. Insert the lock body into the door.
2. Secure the lock body with fasteners using a drill.
3. Run the power wire through the door hole from the front panel.
4. Insert the square rod into the front panel, aligning it with the round hole position.
5. Align the holes and insert the cotter pin. Fold the cotter pin with pliers to ensure it does not get stuck.
6. Install the square bar 5mm above the door surface. If it is too long, cut it (tolerance less than 2mm).
7. Pass the power cord through the cross-holes of the adhesive pad.
8. Adjust the alignment of the rear panel spacer and the front panel.
9. Connect the power cables for the front and rear locks.
10. Plug the connected power cord into the door hole.
11. Align the square rod holes to fit the rear lock.
12. Secure the rear panel with fasteners using a drill.

4. Powering the Lock

4.1. Battery Installation

Figure 4: Battery Installation

1. Unscrew the screws to remove the rear locking battery cover.
2. Insert 4 AA batteries into the battery compartment, ensuring correct polarity.
3. Attach the battery cover and secure it with screws.

4.2. Emergency Power

Figure 5: Emergency Access Options

In case of low battery or power failure, the lock can be opened using a mechanical key or by connecting a Type-C USB power source to the emergency charging port.

5. Operating the Lock

5.1. Unlocking Methods

Figure 6: Multiple Unlocking Methods

• Fingerprint Recognition: Place your registered finger on the semiconductor fingerprint collector. The AI Fingerprint Algorithm ensures a 99.9% success rate and <0.5s fast recognition.
• Password Unlocking: Enter your registered password on the keypad.
• IC Card: Swipe your registered IC card over the designated area.
• Mechanical Key: Use the provided mechanical key for traditional unlocking.
• Tuya App: Use the Tuya Smart App for remote unlocking and temporary password generation.

5.2. Tuya App Features

Figure 7: Tuya App Interface

• Remote Unlocking: Unlock the door remotely from anywhere.
• Generate Dynamic Password: Create one-time or time-limited passwords for visitors, family members, tenants, or babysitters.
• Unlock Record Query: View family home door information and real-time unlock records.
• Battery Checking: Monitor the lock's battery status.
• User Management: Add, modify, or delete user access (fingerprints, passwords, cards).
• Alarm Viewing: Access alarm notifications.

6. Maintenance

• Battery Replacement: The lock uses 4 AA dry batteries. Replace them when the low battery alarm sounds (at 4.8V).
• Cleaning: Wipe the lock surface and fingerprint sensor with a soft, dry cloth. Avoid abrasive cleaners or solvents.
• Weather Protection: The lock is IP68 waterproof and designed to withstand extreme temperatures (-20°C to 60°C) and humidity (20% to 93%). However, avoid prolonged exposure to direct heavy rain or submersion.
• Fingerprint Sensor Care: The semiconductor fingerprint collector is highly durable with wear resistance exceeding 1 million times. Keep it clean for optimal performance.

7. Troubleshooting

• Lock Not Responding: Check battery levels. If low, replace batteries or use the Type-C emergency power supply.
• Fingerprint Not Recognized: Ensure your finger is clean and dry. Try re-registering your fingerprint if issues persist. The false rejection rate is very low (<0.15%).
• Password Not Working: Verify the correct password is being entered. Check for temporary password expiry if applicable.
• App Connectivity Issues: Ensure your phone has a stable internet connection and the lock is within Wi-Fi range. Restart the app or the lock if necessary.
• Door Lock Without Power: Use the mechanical key or Type-C emergency power supply to open the lock.

8. Specifications

9. User Tips

• Fingerprint Setup: To set up a new fingerprint, navigate to the user management section within the Tuya Smart App and follow the on-screen instructions.
• Battery Life: The lock features a long battery life with large capacity. Always pay attention to the low battery reminder to avoid being locked out.
• Emergency Access: Keep your mechanical keys in a safe, accessible location outside the property for emergency use.

10. Warranty and Support

The XSDTS Smart Door Lock is a Certified Original product. For any issues, please refer to the following:

• Security & Privacy: Your personal details are protected and not shared with third parties without consent.
• Product Quality: The product is designed for durability and reliability.

For further assistance or specific inquiries, please contact XSDTS Official Store customer support.