1. Product Overview
The EPEVER Tracer-AN G3 series represents a new generation of MPPT (Maximum Power Point Tracking) solar charge/discharge controllers. This controller is engineered to maximize the utilization of photovoltaic (PV) power and extend battery life through its adaptive 3-stage charging mode. It incorporates a constant voltage output function, ensuring broad compatibility with various battery types, including lithium batteries.
Designed for efficiency, the Tracer2210AN G3 boasts advanced MPPT technology with a tracking efficiency exceeding 99.5% and a maximum DC/DC conversion efficiency of 98%. Its low power consumption design minimizes standby power, making it suitable for applications such as RVs, residential solar systems, and outdoor monitoring setups. Under specific conditions, the PV system can directly power loads without requiring a battery.
Key Features:
- Constant voltage output function.
- Maximum DC/DC conversion efficiency of 98%.
- Advanced MPPT technology with tracking efficiency higher than 99.5%.
- Supports multiple battery types, including Flooded, Lithium, Gel, Sealed, and Customized settings.
- Battery temperature compensation and stable self-activation function.
- Integrated LCD screen for convenient battery parameter setting and monitoring.
- Comprehensive electronic protection mechanisms.
- Low self-consumption, typically less than 10mA.
- Multiple load work modes for flexible power management.
- Parameter setting capabilities via PC software, mobile application, or an optional remote meter.
- RS485 communication interface with support for optional 4G or Wi-Fi modules.


2. Component Identification
Familiarize yourself with the various parts and connection points of your Tracer2210AN G3 controller:

- LCD Display: Shows system status, parameters, and error codes.
- Mounting Holes (Φ5): Used for securing the controller to a surface.
- SELECT Button: Used to navigate through menu options.
- ENTER Button: Used to confirm selections or enter settings.
- Remote Temperature Sensor Port: Connects an external temperature sensor for accurate battery temperature compensation.
- Solar Panel Terminal: Connects to the positive and negative terminals of your solar array.
- Battery Terminal: Connects to the positive and negative terminals of your battery bank.
- Load Terminal: Connects to the positive and negative terminals of your DC loads.
- COM (RJ45 Communication Port): Used for connecting to a remote meter (e.g., MT52), PC software, or Wi-Fi/4G modules for monitoring and parameter setting.
- Wire Gauge Indication (12 AWG): Recommended wire size for terminals.
3. Installation and Setup
Proper installation is crucial for the safe and efficient operation of your solar charge controller. Please follow these steps carefully:
- Mounting: Choose a suitable location for the controller. It should be mounted vertically on a wall or other stable surface, ensuring adequate air circulation for cooling. Use the Φ5 mounting holes to secure the device.
- Wire Preparation: Ensure all wiring is correctly sized. The terminals are designed for a recommended wire size of 10 AWG (6mm²). Strip wires to the appropriate length before insertion.
- Battery Connection: Connect the battery to the controller's BATTERY TERMINAL first. Ensure correct polarity (positive to positive, negative to negative). The controller will automatically detect the system voltage (12V or 24V).
- Solar Panel Connection: Connect the solar panel array to the controller's SOLAR PANEL TERMINAL. Again, observe correct polarity.
- Load Connection: Connect your DC loads to the controller's LOAD TERMINAL. Ensure correct polarity.
- Remote Temperature Sensor (Optional): If using, connect the remote temperature sensor to its designated port. This improves charging accuracy by compensating for battery temperature fluctuations.
- Communication Module (Optional): If using a remote meter (MT52), PC software, or Wi-Fi/4G module, connect it to the COM (RJ45) port.
Warning: Always connect the battery first and disconnect the solar panel last to prevent damage to the controller.

4. Operating Instructions
Once installed, the Tracer2210AN G3 will begin charging the battery using its advanced MPPT algorithm. The LCD display provides real-time information about the system's status.
4.1. Adaptive 3-Stage Charging Mode
The controller employs an adaptive 3-stage charging algorithm to optimize battery charging and prolong its lifespan:
- Bulk Charging: Delivers maximum current to rapidly charge the battery.
- Absorption Charging: Maintains a constant voltage to fully charge the battery, preventing overcharging.
- Float Charging: Reduces voltage to a lower level to maintain the battery at full charge, compensating for self-discharge.
This process can be automatically managed or manually controlled to extend battery life, depending on your battery type and settings.

4.2. Load Control Modes
The controller offers several load control modes to manage the power supply to your DC loads:

- Manual: The load is controlled by a hand switch (or the SELECT/ENTER buttons on the controller).
- Dusk to Dawn with Timer: The controller automatically turns on the load at dusk and turns it off after a set duration.
- Timer: Allows you to set exact ON and OFF times for the load.
- Dust to Dawn: The load is automatically controlled by detecting the PV voltage, turning on at dusk and off at dawn.
Use the SELECT and ENTER buttons on the LCD display to navigate through menus and configure these settings. For detailed parameter adjustments, refer to the PC software, mobile app, or remote meter manual.
5. Maintenance
Regular maintenance ensures the longevity and optimal performance of your EPEVER Tracer2210AN G3 controller:
- Cleanliness: Keep the controller clean and free from dust and debris. Ensure ventilation openings are not obstructed.
- Connections: Periodically check all wire connections (solar panel, battery, load) to ensure they are tight and free from corrosion. Loose connections can cause overheating and performance issues.
- Environmental Conditions: Ensure the controller is operating within its specified temperature and humidity ranges. Avoid direct sunlight exposure if possible, as this can affect internal temperatures.
- Firmware Updates: Check the EPEVER website for any available firmware updates for your model. Updates can improve performance and add new features.
6. Troubleshooting and Protections
The Tracer2210AN G3 controller is equipped with extensive electronic protections to safeguard itself and your solar system components. If an issue occurs, the LCD display may show an error code or indicator.
6.1. Extensive Protections:
- Low Voltage Protection: Disconnects the load when battery voltage drops below a set threshold to prevent deep discharge.
- Over Temperature Protection: Reduces charging/discharging current or shuts down if the controller's internal temperature exceeds safe limits.
- Over Load Protection: Disconnects the load if the current drawn exceeds the controller's rated capacity.
- Over Discharge Protection: Prevents the battery from being discharged too deeply, which can cause irreversible damage.
- Over Voltage Protection: Protects the battery from being charged at excessively high voltages.
- Overcurrent Protection: Safeguards against excessive current flow in various parts of the system.
- Short Circuit Protection: Immediately disconnects in case of a short circuit in the load or battery terminals.
- Reverse Current Protection: Prevents current from flowing from the battery back to the solar panels at night.
For specific troubleshooting steps related to error codes or persistent issues, please consult the comprehensive user manual provided by EPEVER or contact their technical support.
7. Technical Specifications
Below are the detailed technical specifications for the EPEVER Tracer2210AN G3 MPPT Solar Charge Controller:

| Parameter | Specification (Tracer2210AN G3) |
|---|---|
| Battery Rated Voltage | 12/24VDC Auto-recognition |
| Rated Charging Current | 20A |
| Rated Discharge Current | 20A |
| Controller Work Voltage Range | 8-31V |
| PV Max. Open-circuit Voltage | 60V (Battery voltage + 2V)~36V |
| Rated Charging Power | 260W/12V, 520W/24V |
| Static Losses | <8mA (12V), <5mA (24V) |
| Discharge-circuit Voltage Drop | <0.23V |
| Temperature Compensation | -3mV/°C/2V (Default) |
| Grounding Type | Common negative |
| RS485 Port | 5VDC/200mA (RJ45) |
| LCD Backlight Time | Default: 60S, Range: 0-999S (0 seconds: backlight is ON all time) |
| Work Temperature Range | -25°C~+45°C (100% loads working) |
| Storage Temperature Range | -20°C~+70°C |
| Relative Humidity | <95% (N.C.) |
| Enclosure | IP30 |
| Dimension (L x W x H) | 220x154x52 mm |
| Mounting Size (L x W) | 170x145 mm |
| Mounting Hole Size | Φ5mm |
| Terminal | 10AWG (6mm²) |
| Recommended Wire Size | 10AWG (6mm²) |
| Net Weight | 0.94kg |
8. User Tips
- Battery Type Selection: Always ensure the correct battery type is selected in the controller settings to prevent damage and optimize charging. If using lithium batteries, verify compatibility and set parameters carefully.
- System Sizing: Ensure your solar panel array and battery bank are appropriately sized for your controller's capacity (e.g., 20A for Tracer2210AN G3). Over-sizing PV input can damage the controller.
- Monitoring: Utilize the optional remote meter (MT52), PC software, or mobile app via the RJ45 port for comprehensive monitoring of your system's performance and health. This allows for proactive adjustments and troubleshooting.
- Ventilation: Mount the controller in a well-ventilated area. Although it has over-temperature protection, good airflow helps maintain optimal operating temperatures and extends component life.
9. Warranty and Support
For information regarding the product warranty, terms, and conditions, please refer to the documentation included with your purchase or visit the official EPEVER website. If you encounter any issues or require technical assistance, please contact the seller or EPEVER customer support directly, providing your product model and serial number.