LEKATO PS-01R

Contents

LEKATO PS-01R Rechargeable Pedal Power Supply User Manual

Model: PS-01R | Brand: LEKATO

Introduction

The LEKATO PS-01R is a versatile and portable rechargeable power supply designed for guitar effect pedals. It features a high-capacity 10000mAh battery, providing reliable and isolated power to up to 10 pedals simultaneously. With its compact design, low-noise operation, and built-in safety features like short circuit protection, the PS-01R ensures your pedalboard performs optimally without interference. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to help you get the most out of your device.

Product Overview

The LEKATO PS-01R is engineered to deliver clean and stable power to your guitar pedals. Key features include:

  • High-Capacity Rechargeable Battery: Built-in 10000mAh (3.7V lithium polymer) battery for extended use, offering approximately 6.5 hours of charging time.
  • 10 Isolated DC Outputs:
    • 8 x DC 9V 100mA outputs
    • 2 x DC 9V 300mA outputs
    Each output works independently to prevent interference between pedals.
  • USB Charging Port: A 5V/1A USB output port for temporary emergency charging of mobile phones and other portable devices.
  • Type-C Input: Supports 5V/2A charging for the power supply itself, with automatic stop charging when fully charged.
  • Short Circuit and Over Current Protection: Each DC output and the lithium battery are equipped with separate short-circuit protection. A short circuit in one port will not affect the operation of other ports.
  • Low Noise Design: Features a powerful built-in noise filter and chip to significantly reduce noise and ensure stable signal performance.
  • LED Indicator Lights:
    • 1 x Red power indicator
    • 4 x Green battery level indicators (25%, 50%, 75%, 100%)
    • 10 x Blue port output indicators (illuminate when active, turn off in case of short circuit)
  • Durable Construction: Made with a superior heat-radiating aluminum alloy shell for stability and a compact, space-saving design.
LEKATO PS-01R Pedal Power Supply with features labeled: 10 Outputs, 1 USB Port, Low Noise, 5V/10000mAh, Type-C, Stable.
Figure 1: Product Overview with Key Features
Diagram showing the 10 isolated output interfaces, Type-C input, and USB output of the LEKATO PS-01R.
Figure 2: Isolated Output Interface Diagram

Package Contents

Please check the package carefully to ensure all items are present:

  • 1 x LEKATO PS-01R Guitar Pedal Power Supply
  • 1 x Type-C Cable (39.4 inches / 100 cm)
  • 10 x DC Cables (20 inches / 50 cm)
  • 1 x User Manual

Note: The power adapter for charging the unit is NOT included.

Image showing the LEKATO PS-01R power supply, Type-C cable, 10 DC cables, and user manual in their packaging.
Figure 3: What's Included in the Box

Specifications

FeatureSpecification
BrandLEKATO
ModelPS-01R
ColorGreen
MaterialAluminum Alloy Shell
Battery Capacity10000mAh (3.7V Lithium Polymer)
Charging TimeApproximately 6.5 hours
Type-C InputDC 5V/2A (for charging the unit)
DC 9V Outputs8 x 100mA, 2 x 300mA (Total 10 isolated outputs)
USB OutputDC 5V/1A
ProtectionShort Circuit and Over Current Protection for each output
Control TypeKnob (Power Switch)
Dimensions (L x W x H)7.68 in x 4.33 in x 2.36 in (19.5 cm x 11 cm x 6 cm)
Weight22.75 oz / 654 g
Image showing the LEKATO PS-01R power supply with its dimensions labeled: 7.68 inches length, 4.33 inches width, 2.36 inches height.
Figure 4: Portable Size and Dimensions

Setup Instructions

  1. Charge the Power Supply:
    • Connect the provided Type-C cable to the Type-C charging port on the PS-01R.
    • Connect the other end of the Type-C cable to a 5V/2A USB power adapter (not included).
    • The green battery indicator LEDs will illuminate to show the charging progress. All four green LEDs will be solid when fully charged. Charging takes approximately 6.5 hours.
  2. Connect Guitar Pedals:
    • Ensure the PS-01R is turned off before connecting pedals.
    • Use the provided DC cables to connect your guitar pedals to the DC 9V output ports.
    • Match the current requirements of your pedals to the available outputs (8 x 100mA, 2 x 300mA). Do not exceed the current rating of each port.
  3. Power On:
    • Once all pedals are connected, press the power switch to turn on the PS-01R.
    • The red power indicator LED will light up, and the blue port output indicator LEDs will illuminate for each active output.
Image showing the LEKATO PS-01R power supply being charged via its Type-C port, with battery level indicators showing 10000mAh capacity.
Figure 5: Charging the Power Supply and Battery Indicators

Operating Instructions

  1. Powering Pedals:
    • After powering on, the connected pedals will receive stable 9V DC power from their respective isolated outputs.
    • The blue LED above each output port indicates that the port is active and supplying power.
  2. Using the USB Output:
    • The 5V/1A USB output port can be used to charge other USB-powered devices such as smartphones, AirPods, or wireless in-ear monitors.
    • Simply connect your device's USB charging cable to the PS-01R's USB output port.
  3. Monitoring Battery Level:
    • The four green LEDs on the side of the unit indicate the remaining battery charge:
      • 1 LED: 0-25%
      • 2 LEDs: 26-50%
      • 3 LEDs: 51-75%
      • 4 LEDs: 76-100%
    • Recharge the unit when the battery level is low to ensure uninterrupted performance.
  4. Short Circuit Protection:
    • If a short circuit occurs on any output port, its corresponding blue LED indicator will turn off. This indicates that the protection mechanism has activated for that specific port, preventing damage to the pedal and the power supply.
    • Other ports will continue to function normally due to the isolated design.
    • To resolve, disconnect the problematic pedal and check its wiring or functionality. Once the short is cleared, the blue LED for that port should reactivate upon reconnection (or after cycling power if necessary).
Image showing the LEKATO PS-01R power supply charging a smartphone via its USB output port, demonstrating multi-device charging capability.
Figure 6: Multi-Device Charging via USB Port
Image illustrating the short circuit protection feature of the LEKATO PS-01R, showing an LED indicator for normal use and another for a short circuit.
Figure 7: Short Circuit Protection Indicator

Maintenance

  • Cleaning: Use a soft, dry cloth to clean the exterior of the power supply. Do not use liquid cleaners or solvents.
  • Storage: Store the unit in a cool, dry place away from direct sunlight and extreme temperatures.
  • Battery Care:
    • To prolong battery life, avoid completely discharging the battery frequently.
    • If storing for an extended period, charge the unit to about 50-75% capacity and recharge every 3-6 months.
    • Do not attempt to replace the internal battery yourself. Contact support if battery issues arise.
  • Cable Management: Keep DC and Type-C cables organized and free from kinks or damage to ensure proper power delivery and prevent short circuits.

Troubleshooting

ProblemPossible CauseSolution
No power to pedals
  • Power supply is off.
  • Battery is depleted.
  • DC cable is loose or faulty.
  • Pedal is faulty or has a short circuit.
  • Ensure the power switch is ON.
  • Check green battery indicators; recharge if necessary.
  • Verify all DC cable connections are secure. Try a different cable.
  • Check the blue LED for the specific output. If off, disconnect the pedal and test with another known working pedal.
Blue output LED is off for a connected pedal
  • Short circuit detected in the connected pedal or cable.
  • Pedal requires more current than the port provides.
  • Disconnect the pedal and cable from that port. Check the pedal and cable for faults. The LED should reactivate once the short is cleared.
  • Ensure the pedal's current draw (mA) does not exceed the output port's rating (100mA or 300mA).
Power supply not charging
  • Type-C cable is loose or faulty.
  • Charging adapter is not 5V/2A or is faulty.
  • Charging port is damaged.
  • Ensure Type-C cable is securely connected. Try a different Type-C cable.
  • Use a reliable 5V/2A USB power adapter.
  • Contact customer support if the port appears damaged.
Excessive noise or hum
  • Ground loop issues.
  • Faulty patch cables.
  • Interference from other electronic devices.
  • Ensure all pedals are connected to the isolated outputs.
  • Test patch cables individually.
  • Move the power supply and pedalboard away from other power sources or noisy electronics.

User Tips

  • Cable Length: The included 20-inch DC cables are suitable for most pedalboard setups. Consider purchasing longer or shorter cables if your pedal arrangement requires it.
  • Power Adapter: While not included, a standard 5V/2A USB wall adapter (like those for smartphones) is recommended for efficient charging.
  • Pedal Compatibility: Always check the voltage and current requirements of your pedals before connecting them to avoid damage. This unit provides 9V DC power.
  • Portable Charging: The USB output is great for keeping your phone or other small devices topped up during gigs or practice sessions, especially when power outlets are scarce.

Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the contact information provided by your retailer or the manufacturer's official website. Keep your purchase receipt as proof of purchase for any warranty claims.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.