LEKATO P16

Contents

LEKATO P16 XLR Bluetooth Receiver User Manual

Model: P16

Brand: LEKATO

1. Introduction

The LEKATO P16 XLR Bluetooth Receiver is a portable and powerful wireless adapter designed to transform wired audio setups into wireless systems. Utilizing advanced Bluetooth 5.3 technology, it delivers high-fidelity 48kHz/24bit audio with low latency, making it ideal for professional audio applications such as mixing consoles, audio mixers, PA speakers, and DJ systems. Its compact design and long battery life offer unparalleled freedom and flexibility for various venues and events.

Hand holding the compact LEKATO P16 XLR Bluetooth Receiver, highlighting its portability and 50-gram weight.

The LEKATO P16 is designed to be portable and powerful, weighing approximately 50 grams.

2. Safety and Warnings

Please read all instructions carefully before using this product to ensure safety and prevent damage. Keep this manual for future reference.

General Safety Advisory

  • Always assume potential hazards are present until proper safety verification is completed.
  • **Children Safety:** Keep the device and its cord out of reach of children under 3 years old. In case of ingestion, seek medical attention immediately.
  • **Environment Assessment:** Identify potential dangers such as electrical sources, trip hazards, toxic substances, or moving machinery before proceeding.
  • **Personal Protective Equipment (PPE):** Wear appropriate PPE (e.g., safety glasses, gloves, helmet) as required for the specific task or environment.
  • **Follow Procedures:** Never bypass safety protocols, guards, or interlocks. Use equipment only for its intended purpose.
  • **Stay Alert:** Do not operate machinery or perform hazardous tasks if you are fatigued, distracted, or under the influence of medication or substances that impair judgment.

Immediate Action Required

  • STOP if you are uncertain about the safety of any action.
  • CONSULT the relevant official safety manuals or qualified personnel for guidance.
  • DO NOT PROCEED without proper authorization and training for hazardous tasks.

Your safety and the safety of others is paramount. Neglecting warnings can lead to severe injury or fatal accidents.

Product Cautions

  1. Do not disassemble or repair this product by yourself.
  2. Do not use or store it near any heat sources, damp, or dusty areas. Avoid violent vibrations or shock.
  3. Do not drop this product, otherwise it may malfunction.
  4. Do not use alcohol or other cleaning fluids to clean this product. Use a dry cloth only.
  5. Ensure the transmitter and receiver maintain a distance from wireless routers or other wireless equipment during use to prevent interference.
  6. Obstructions between the transmitter and the receiver may affect the transmission distance.
  7. A maximum of 4 sets of transmitters and receivers can be used in the same place simultaneously.
  8. If only one power indicator is flickering during use, indicating low battery, the transmission distance and quality will be affected. Charge it in time.
  9. Please turn off the transmitter and the receiver when not in use.
  10. Due to the self-discharge characteristic of lithium batteries, charge the battery every 2 months to avoid low battery protection.
  11. The lithium battery capacity decreases gradually after repeated charge and discharge, affecting the product's lifespan over time.
  12. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
  13. Do not defeat the safety purpose of the polarized or grounding-type plug. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
  14. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and where they exit from the apparatus.
  15. Use only attachments/accessories specified by the manufacturer.
  16. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
  17. Unplug this apparatus during lightning storms or when unused for long periods of time.
  18. Refer all servicing to qualified service personnel if the apparatus has been damaged in any way (e.g., power supply cord or plug damaged, liquid spilled, objects fallen into apparatus, exposed to rain or moisture, does not operate normally, or has been dropped).
  19. The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection.
  20. Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.

This product conforms with all applicable European Union regulations, indicated by the CE marking.

3. Package Contents

The LEKATO P16 XLR Bluetooth Receiver is available in two configurations:

  • 1 Pack (Mono): 1 x XLR Bluetooth Receiver
  • 2 Pack (Stereo): 2 x XLR Wireless Bluetooth Receivers
LEKATO P16 XLR Bluetooth Receiver, 1-pack version

1-Pack (Mono)

Two LEKATO P16 XLR Bluetooth Receivers, 2-pack version

2-Pack (Stereo)

4. Setup

The LEKATO P16 is designed for instant plug-and-play setup. Follow these steps to get started:

  1. Plug In: Insert the XLR end of the LEKATO P16 receiver into any XLR input on your mixing console, audio mixer, PA speaker, or other compatible audio equipment.
  2. Power On: Press and hold the power button on the receiver until the indicator lights illuminate.
  3. Connect via Bluetooth: On your smartphone, tablet, or laptop, search for Bluetooth devices and select "P16" from the list to pair.
  4. Play Audio: Once connected, you can stream wireless audio from your device to the connected audio equipment.
Diagram showing the LEKATO P16 receiver connecting to various devices like PC, tablet, smartphone, PA speaker, audio mixer, and portable recorder, with a 3-step 'Plug, Connect, Play' guide.

The LEKATO P16 offers optimized compatibility and a simple 3-step setup process: Plug, Connect, Play.

5. Operating Instructions

Power On/Off

  • To power on, press and hold the power button until the indicator lights turn on.
  • To power off, press and hold the power button until the indicator lights turn off.

Bluetooth Pairing

The device features auto-reconnect functionality. Once paired, it will automatically connect to the last paired device when powered on and within range.

Mono and Stereo Playback

  • Mono Audio: Use a single LEKATO P16 receiver plugged into an XLR input for mono audio playback.
  • Stereo Audio: For stereo sound, use two LEKATO P16 receivers. Pair both units to your audio source. One unit will act as the left channel and the other as the right, providing a full stereo experience.
Diagram illustrating mono and stereo setup. One receiver plugged into a mixer for mono audio, and two receivers paired and plugged into a mixer for stereo audio.

The LEKATO P16 supports both mono (1 pack) and stereo (2 pack) audio configurations.

Wireless Range

The LEKATO P16 offers a reliable wireless range of up to 165 feet (50 meters), allowing you to move freely without signal loss. Ensure there are no significant obstructions between your audio source and the receiver for optimal performance.

LEKATO P16 receiver plugged into a mixer, with a smartphone wirelessly streaming audio from a distance, indicating a range of up to 50 meters (165 feet).

Enjoy freedom of movement with a wireless range of up to 50 meters (165 feet).

Applications

The LEKATO P16 is versatile and suitable for various events and setups:

  • Live Performances
  • Weddings
  • DJ Shows
  • Church Choirs and other worship events
  • Rehearsal Rigs
  • Portable Setups
Four images depicting various applications of the LEKATO P16: a band performing, a wedding, a church chorus, and a DJ at a mixing console.

The LEKATO P16 is suitable for a wide range of professional audio applications.

6. Maintenance

  • Cleaning: Use only a dry cloth to clean the product. Do not use alcohol or other cleaning fluids.
  • Storage: Do not store the device in areas with high heat, dampness, or excessive dust. Avoid violent vibrations or shocks.
  • Battery Care: The built-in lithium battery has a slight self-discharge characteristic. To maintain battery health and avoid low battery protection, charge the device every 2 months, even if not in use.
  • Battery Lifespan: The capacity of the lithium battery will gradually decrease after repeated charge and discharge cycles, which is normal and will affect the product's overall lifespan over time.

7. Troubleshooting

  • Low Battery Indication: If only one power indicator is flickering, it signifies a low battery. This will affect transmission distance and audio quality. Please charge the device promptly using the USB-C port.
  • Interference/Poor Transmission: Ensure the receiver is kept at a reasonable distance from wireless routers or other wireless equipment to minimize interference. Physical obstructions between the audio source and receiver can also affect transmission distance and quality.
  • Device Not Powering On: Ensure the device is fully charged. If it still doesn't power on, refer to the safety guidelines regarding servicing.
  • Cannot Pair via Bluetooth: Make sure the device is in pairing mode (indicator light blinking). Check that Bluetooth is enabled on your source device (smartphone, tablet, laptop) and that "P16" is selected. Try restarting both the receiver and your source device.
  • No Audio Output: Verify that the receiver is securely plugged into the XLR input of your audio equipment. Check the volume levels on both your source device and the audio equipment. Ensure the receiver is successfully paired.

8. Specifications

Feature Detail
Material Composite Materials
Bluetooth Version 5.3
Sampling Rate 48kHz/24bit
SNR (Signal-to-Noise Ratio) 95dB
THD (Total Harmonic Distortion) <=0.02%
Frequency Range 20Hz-20kHz
Latency <4 ms
Wireless Range Up to 165 ft / 50 m
Battery Life Up to 15-20 hours (depending on volume, codec, and conditions)
Charging Port USB Type-C (Fast Charge)
Charging Time Approx. 2 hours
Phantom Power Support 48V (suitable for condenser mics)
Dimensions (Approx.) 9.5 cm (3.74 in) Length, 3 cm (1.18 in) Width
Weight (Approx.) 50 grams
LEKATO P16 receiver with key specifications: 48kHz/24bit Sampling Rate, 95dB SNR, <=0.02% THD, 20Hz-20kHz Frequency Range.

Wireless HiFi Sound Specifications

Close-up of the LEKATO P16 charging via USB-C, highlighting 15 hours of battery life and quick charging.

Battery Life and Charging

Dimensions of the LEKATO P16 receiver, showing 3.74 inches (9.5 cm) in length and 1.18 inches (3 cm) in width.

Product Dimensions

9. User Tips

  • Maximize Battery Life: While the stated battery life is up to 15-20 hours, actual runtime can vary based on volume levels, audio codec used, and environmental conditions. For longer sessions, ensure the device is fully charged before use.
  • Optimal Placement: To achieve the best wireless range and signal stability, try to minimize physical barriers between your audio source and the P16 receiver.
  • Regular Charging: Even if you don't use the device frequently, remember to charge the lithium battery every two months to prevent deep discharge and prolong its overall lifespan.

10. Warranty and Support

For detailed warranty information, technical support, or service inquiries, please refer to the official LEKATO website or contact your retailer. Keep your proof of purchase for any warranty claims.

Additional documentation, including the EC Declaration of Conformity, can be found in the product packaging or by contacting customer support.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.