LEKATO P16 Dual XLR Bluetooth Adapters User Manual

1. Introduction

The LEKATO P16 Dual XLR Bluetooth Adapters are designed to transform wired audio systems into wireless setups, offering high-fidelity sound and extended range. This manual provides essential information for the safe and efficient use of your P16 adapters, including setup, operation, maintenance, and troubleshooting.

The P16 adapters feature cutting-edge Bluetooth 5.3 technology, delivering pristine 48kHz/24bit audio quality to mixing consoles, audio mixers, PA speakers, and DJ systems. With an impressive wireless range of up to 165 feet (50 meters) and low latency, they are ideal for various professional and personal audio applications.

2. Safety Information

Please read all instructions carefully before using the device to ensure safety and prevent damage. Keep these instructions for future reference.

2.1 General Warnings

• Children: Keep the device and its cord out of reach of children under 3 years old. In case of ingestion, seek medical attention immediately.
• Water: Do not use this apparatus near water.
• Disassembly/Repair: Do not disassemble or repair this product by yourself. Refer all servicing to qualified service personnel.
• Heat Sources: Do not use or store it near any heat sources, damp, or dusty areas. Avoid violent vibrations or shock.
• Dropping: Do not drop this product, as it may malfunction.
• Cleaning: Clean only with a dry cloth. Do not use alcohol or other cleaning fluids.
• Ventilation: Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
• Power Plug: Do not defeat the safety purpose of the polarized or grounding-type plug. If the provided plug does not fit your outlet, consult an electrician for replacement of the obsolete outlet.
• Power Cord: Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and where it exits the apparatus.
• Attachments/Accessories: Use only attachments/accessories specified by the manufacturer.
• Moving Equipment: When using with a cart, stand, tripod, or bracket, use caution when moving the combination to avoid injury from tip-over.
• Unplugging: Unplug this apparatus during lightning storms or when unused for long periods.
• Earthing: The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection.
• Disconnect Device: Where the MAINS plug or an appliance coupler is used as the disconnect device, it shall remain readily operable.

2.2 Essential Precautions

• Assess the Environment: Look for and identify potential dangers such as electrical sources, trip hazards, toxic substances, or moving machinery before proceeding.
• Use Personal Protective Equipment (PPE): Wear appropriate PPE (e.g., safety glasses, gloves, helmet) as required for the specific task or environment.
• Follow Procedures: Never bypass safety protocols, guards, or interlocks. Use equipment only for its intended purpose.
• Stay Alert: Do not operate machinery or perform hazardous tasks if you are fatigued, distracted, or under the influence of medication or substances that impair judgment.

2.3 Immediate Action Required

• STOP if you are uncertain about the safety of any action.
• CONSULT the relevant official safety manuals or qualified personnel for guidance.
• DO NOT PROCEED without proper authorization and training for hazardous tasks. Your safety and the safety of others is paramount. Neglecting warnings can lead to severe injury or fatal accidents.

2.4 CE Declaration of Conformity

This product conforms with all applicable European Union regulations. The CE marking confirms that the product meets the essential requirements for health, safety, environmental protection, and consumer protection as laid down in EU directives. By affixing the CE marking, the manufacturer declares that the product is in compliance with all legal requirements for CE marking and may be placed on the market throughout the European Economic Area.

3. Product Overview

The LEKATO P16 is a compact and powerful XLR Bluetooth adapter designed for professional audio applications. It allows you to wirelessly stream high-quality audio from your Bluetooth-enabled devices to mixers, PA systems, and other audio equipment.

3.1 Key Features

• Wireless XLR Receiver with Bluetooth 5.3
• Studio-grade 48kHz/24bit DAC
• Up to 165ft (50m) wireless range
• Low latency (<4ms)
• Long battery life (up to 15-20 hours)
• USB-C quick charging
• Compact and portable design (50 grams)
• Supports 48V Phantom power for condenser microphones
• Automatic frequency hopping
• Plug and Play functionality

3.2 Package Contents

• 1 x LEKATO P16 XLR Bluetooth Receiver (for Mono setup)
• OR
• 2 x LEKATO P16 XLR Bluetooth Receivers (for Stereo setup)
• USB-C Charging Cable
• User Manual (this document)

4. Setup and Connection

The LEKATO P16 adapters are designed for instant plug-and-play setup with simple pairing and auto-reconnect functionality.

4.1 Single Unit (Mono Setup)

1. Plug: Insert one LEKATO P16 adapter into an available XLR input on your mixer, active PA speaker, or other audio equipment.
2. Power On: Press and hold the power button on the P16 adapter until the indicator lights illuminate.
3. Connect: On your Bluetooth-enabled device (smartphone, tablet, laptop, etc.), navigate to the Bluetooth settings. Search for and select "P16" from the list of available devices to pair.
4. Play: Once connected, stream your audio wirelessly from your device. The P16 will deliver mono audio playback.

4.2 Dual Units (Stereo Setup)

If you have two LEKATO P16 adapters, you can set them up for stereo audio playback.

1. Plug: Insert the first P16 adapter into the left XLR input and the second P16 adapter into the right XLR input of your audio mixer or PA system.
2. Pairing the Adapters: The adapters should automatically pair with each other when powered on within range. One unit will act as the master (green power button LED) and the other as the slave (red power button LED).
3. Power On: Press and hold the power button on both P16 adapters until the indicator lights illuminate.
4. Connect: On your Bluetooth-enabled device, navigate to the Bluetooth settings. Search for and select "P16" from the list of available devices to pair. Your device will connect to the master P16 unit, which then transmits the stereo signal to the slave unit.
5. Play: Once connected, stream your audio wirelessly from your device. The P16 system will deliver stereo audio playback.

Note:

• A maximum of 4 sets of transmitters and receivers can be used in the same place simultaneously.
• The Bluetooth name for pairing is "P16".

5. Operating Instructions

5.1 Power On/Off

To power on, press and hold the power button (located on the front of the unit) until the indicator lights activate. To power off, press and hold the power button again until the lights turn off. It is recommended to turn off the adapters when not in use to conserve battery life.

5.2 Bluetooth Connection

Once powered on, the P16 adapter(s) will automatically enter pairing mode. Search for "P16" on your Bluetooth device and connect. The adapter supports auto-reconnect with previously paired devices.

5.3 Audio Playback

After successful connection, you can stream audio from your device. The P16 provides high-fidelity wireless audio with a wide frequency response of 20Hz-20kHz.

5.4 Range and Performance

The P16 offers a reliable wireless range of up to 165 feet (50 meters). For optimal performance, ensure a clear line of sight between your Bluetooth device and the P16 adapter(s). Obstructions can affect transmission distance and audio quality.

5.5 Battery Status

The power indicator light will flicker when the battery is low. This may affect transmission distance and audio quality. Please charge the device promptly when the indicator flickers.

6. Charging the Device

The LEKATO P16 features a built-in rechargeable lithium battery.

1. Connect a USB-C charging cable to the USB-C port on the side of the P16 adapter.
2. Connect the other end of the USB-C cable to a suitable USB power source (e.g., computer USB port, USB wall adapter).
3. The device supports quick charging, with a full charge typically taking about 2 hours.
4. A fully charged adapter provides up to 15-20 hours of battery life, depending on usage volume, codec, and environmental conditions.

7. Maintenance and Care

• Cleaning: Clean the device only with a dry cloth. Do not use alcohol or other cleaning fluids.
• Storage: Store the device in a cool, dry place away from direct sunlight, heat sources, and excessive dust. Avoid violent vibrations or shock.
• Battery Care: Due to the self-discharge characteristic of lithium batteries, please charge the battery every 2 months to avoid low battery protection and prolong its lifespan. The lithium battery capacity will decrease gradually after repeated charge and discharge cycles.
• Environmental Disposal: This product should not be disposed of with household waste. It must be taken to a collection center licensed for the recycling of waste electrical and electronic equipment (WEEE Directive 2012/19/EU). Proper disposal contributes to the efficient use of natural resources and prevents potential negative impacts on the environment and human health.

8. Troubleshooting

9. Specifications

10. User Tips

• For the best audio experience and to maximize wireless range, always ensure a clear line of sight between your Bluetooth source device and the P16 adapter(s).
• If you experience any signal drops or interference, try moving the P16 away from other wireless devices like Wi-Fi routers.
• Regularly charge your P16 adapters, especially if they haven't been used for a while, to maintain battery health.
• When setting up a stereo system with two P16 units, ensure both are powered on and allowed to pair with each other before connecting your phone or tablet.
• The P16 is versatile; experiment with different setups (mixers, PA speakers, portable recorders) to find what works best for your specific needs.

11. Warranty and Support

For detailed warranty information and technical support, please refer to the official product documentation or contact LEKATO customer service.

All servicing of this product should be performed by qualified service personnel. Do not attempt to repair the device yourself.

A comprehensive user manual in PDF format is available for download. Please refer to the Item guides & documents (PDF) for additional information.