Vivicine D5000 Series Projector User Manual

1. Introduction

Thank you for purchasing the Vivicine D5000 Series Projector. This manual provides essential information for setting up, operating, and maintaining your projector to ensure a high-quality home theater experience. Please read this manual thoroughly before using the product and keep it for future reference.

The Vivicine D5000 series offers a high-brightness, portable solution for home theater, business presentations, and mobile office use, supporting 1080p resolution with 4K video decoding capabilities.

2. Safety Information

• Do not look directly into the projector lens when the lamp is on.
• Ensure proper ventilation around the projector to prevent overheating.
• Do not expose the projector to rain, moisture, or extreme temperatures.
• Use only the power adapter supplied with the projector.
• Avoid placing the projector on unstable surfaces.
• Do not attempt to disassemble or repair the projector yourself. Contact qualified service personnel.
• Keep the projector away from water and other liquids.

3. Package Contents

Please check that all the following items are included in your package:

• Vivicine D5000 Series Projector
• Remote Controller
• Power Cord
• User Manual (this document)

4. Product Overview

Familiarize yourself with the projector's physical features and connection ports.

Figure 4.1: Front View of the D5000 Projector

Figure 4.2: Rear View with Input/Output Ports

4.1 Input/Output Ports

• HDMI (x2): Connect to HDMI-enabled devices such as Blu-ray players, gaming consoles, or laptops.
• USB (x2): Connect USB storage devices for media playback.
• VGA: Connect to older computers or devices with VGA output.
• Ethernet: For wired network connection (available on D5000UP model).
• 3.5mm Earphone Out: Connect external speakers or headphones.
• AC Power Input: Connect the power cord.

4.2 Key Features

• 5.7-inch LCD display with 1920x1080 physical resolution.
• LED light source with 650 ANSI lumens brightness (supports 4K input).
• Built-in stereo speakers with upgraded Dolby sound effect.
• Built-in Media Player for direct video, audio, and image playback.
• Manual zoom and focus adjustment.
• Automatic vertical keystone correction (±15°).
• Wireless connectivity: 2.4G Wi-Fi and Bluetooth 4.0/BT5.0.
• Screen Mirroring via Airplay/MiraCast.

Figure 4.3: Internal Speaker Design for Enhanced Dolby Sound

Figure 4.4: Multi-angle view with key features: LED+ Single LCD with 1920x1080P physical resolution, ultra-high brightness, built-in stereo speakers, built-in media player, advanced LED light source, up to 120-inch dynamic picture, and four-corner keystone correction.

5. Setup

5.1 Placement

• Place the projector on a stable, flat surface.
• Ensure the projector is positioned within the optimal projection distance of 0.5 to 5.5 meters from the screen to achieve a screen size of 40 to 200 inches.
• For best results, project onto a white or light-colored, smooth surface.
• Ensure there are no obstructions blocking the projector's vents.

5.2 Power Connection

1. Connect the supplied power cord to the AC power input port on the projector.
2. Plug the other end of the power cord into a power outlet (100-240V).
3. The power indicator light will illuminate.

5.3 Connecting External Devices

• HDMI: Use an HDMI cable to connect your device (e.g., laptop, game console) to one of the HDMI ports on the projector.
• USB: Insert a USB flash drive or external hard drive into a USB port for direct media playback.
• VGA: Connect a VGA cable from your computer's VGA output to the projector's VGA port.
• Ethernet (D5000UP only): Connect an Ethernet cable to the LAN port for a wired internet connection.
• Audio Out: Connect external speakers or headphones to the 3.5mm audio output jack for enhanced sound.

5.4 Focus and Keystone Adjustment

• Focus: Rotate the focus ring on the projector lens until the image appears sharp and clear.
• Keystone Correction: The projector features automatic vertical keystone correction (±15°). For more precise adjustments or if the image is still distorted, use the manual keystone correction settings in the projector's menu. The D5000 series also supports four-corner keystone correction for flexible placement.

6. Operating Instructions

6.1 Power On/Off

• Power On: Press the power button on the projector or the remote control. The projector will start up.
• Power Off: Press the power button again. A confirmation message may appear; select 'Power Off' to shut down the projector safely.

6.2 Source Selection

Use the 'Source' button on the remote control or the projector's control panel to cycle through available input sources (HDMI1, HDMI2, VGA, USB, Media Player, etc.).

6.3 Menu Navigation

Use the arrow keys and 'OK' button on the remote control to navigate through the on-screen display (OSD) menu. Here you can adjust picture settings, sound settings, network settings, and more.

6.4 Bluetooth Connectivity

To connect Bluetooth devices (e.g., speakers, headphones):

1. Go to the projector's settings menu and select 'Bluetooth'.
2. Enable Bluetooth and search for available devices.
3. Select your desired device from the list to pair.

6.5 Screen Mirroring (Airplay/MiraCast)

The D5000 series supports screen mirroring from compatible devices via Airplay (for iOS) and MiraCast (for Android).

1. Ensure your projector and mobile device are connected to the same Wi-Fi network.
2. Select the 'Screen Mirror' option from the projector's main menu.
3. On your mobile device, activate screen mirroring/casting and select the projector from the list of available devices.

6.6 Media Playback

Insert a USB storage device into the projector's USB port. Navigate to the 'Media Player' application from the main menu. You can browse and play various media formats:

• Video: Supports 4K@30Hz, H.264/AVC, MKV, MP4, AVI, etc.
• Audio: Supports MP3, AAC, WMA.
• Image: Supports JPEG, BMP.

7. Maintenance

7.1 Cleaning

• Lens: Use a soft, lint-free cloth specifically designed for optical lenses. Do not use abrasive cleaners.
• Casing: Wipe the projector's casing with a soft, dry cloth. For stubborn dirt, use a slightly damp cloth and then dry thoroughly.
• Vents: Regularly check and clean the air vents to prevent dust buildup, which can affect cooling performance. Use a soft brush or compressed air.

7.2 Storage

When not in use for extended periods, store the projector in a cool, dry, and dust-free environment. Use the original packaging or a protective case to prevent damage.

8. Troubleshooting

• No Power: Ensure the power cord is securely connected to both the projector and the power outlet. Try a different outlet.
• No Image: Check the input source selection. Ensure the connected device is powered on and sending a signal. Check HDMI/VGA cable connections.
• Blurry Image: Adjust the focus ring on the lens. Ensure the projection distance is within the recommended range.
• Distorted Image (Trapezoid): Use the keystone correction feature to adjust the image shape.
• No Sound: Check the volume settings on both the projector and the connected source device. Ensure external speakers/headphones are properly connected if used.
• Remote Control Not Working: Check the batteries in the remote. Ensure there are no obstructions between the remote and the projector's IR receiver.

9. Specifications

10. User Tips

• For optimal picture quality, use the projector in a dark room.
• Experiment with different projection distances and keystone settings to find the best image for your space.
• Consider connecting external speakers via the 3.5mm audio out for a more immersive audio experience, especially in larger rooms.
• Regularly check for firmware updates (for D5000UP model) to ensure the best performance and compatibility.

11. Warranty and Support

Vivicine products are designed for reliability and performance. For any technical support or warranty inquiries, please refer to the contact information provided at the point of purchase or visit the official Vivicine website. Keep your purchase receipt as proof of purchase for warranty claims.