Baseus Super Energy Max Car Jump Starter User Manual

1. Product Overview

The Baseus Super Energy Max Car Jump Starter is a high-performance, portable device designed to jumpstart 12V vehicles with dead batteries. It also functions as a power bank for charging electronic devices and includes an emergency flashlight. With a peak current of 2000A and a 20000mAh battery, it is suitable for a wide range of gasoline and diesel vehicles.

Baseus Super Energy Max Car Jump Starter with intelligent ignition clamps and USB cable — Figure 1: Product components - Jump Starter, Intelligent Ignition Clamps, USB-C Charging Cable.

Video 1: Overview of the Baseus Super Energy Max Car Jump Starter's features and usage.

2. Package Contents

Baseus Super Energy Max Car Jump Starter
Intelligent Ignition Clamps
USB-C Charging Cable
User Manual (this document)

Image showing the jump starter, intelligent clamps, and USB cable as packing accessories — Figure 2: The complete set of packing accessories included with the jump starter.

3. Setup and First Use

3.1 Charging the Jump Starter

Before first use, ensure the jump starter is fully charged. Connect the provided USB-C charging cable to the input port of the jump starter and a suitable USB power adapter (not included). The digital display will show the charging progress and current battery level.

Close-up of the jump starter's digital display showing battery percentage and charging port — Figure 3: The clear digital display shows the precise battery level, essential for readiness.

3.2 Connecting the Intelligent Ignition Clamps

The intelligent ignition clamps are designed with eight safety protections, including OD anti-reverse connection, ensuring safe operation. Always connect the clamps to the jump starter first, then to the vehicle battery.

Intelligent ignition clamps with safety features highlighted — Figure 4: Intelligent Ignition Clamps featuring safe operation, intelligent detection, and OD anti-reverse connection.

4. Operating Instructions

4.1 Jumpstarting a Vehicle

Follow these three simple steps to jumpstart your vehicle:

Connect: Insert the intelligent ignition clamps into the EC5 interface of the jump starter. The clamp indicator will flash red and green alternately.
Clip: Open the vehicle's hood. Clip the red positive (+) ignition clamp to the positive terminal of the car battery and the black negative (-) ignition clamp to the negative terminal of the car battery.
Light it up: Go into the car and start it up. After starting the car, please remove the jump starter and clamps in reverse order (negative first, then positive, then from the jump starter).

Diagram showing three steps: Connect clamps to jump starter, clip clamps to car battery, start car engine — Figure 5: Visual guide for the three-step jumpstart process.

Close-up of jump starter connected to a car battery with positive and negative clamps labeled — Figure 6: Proper connection of positive (red) and negative (black) clamps to the car battery terminals.

4.2 Using as a Power Bank

The jump starter features dual USB outputs, allowing it to function as a portable power station for your electronic devices. It supports simultaneous charging of two devices.

Output 1 (Fast Charging Port): 5V/3A, 9V/3A, 12V/2.5A (Max)
Output 2 (Standard Charging Port): 5V/2.4A (Max)

Jump starter charging a tablet and a smartphone simultaneously — Figure 7: The jump starter's dual USB outputs can charge tablets, laptops, phones, and other devices.

4.3 Flashlight and Emergency Light

The device includes a built-in flashlight with three light modes: high brightness, SOS mode, and flashing light mode. Long press the power button to activate the high brightness mode. This feature is useful for roadside emergencies or working in low-light conditions.

Person using the jump starter's flashlight function under a car hood — Figure 8: The integrated flashlight and emergency light provide illumination for various situations.

5. Maintenance

Store the jump starter in a cool, dry place away from direct sunlight and extreme temperatures.
Charge the device at least once every three months to maintain battery health, even if not in use.
The jump starter features a low-power sleep mode with 0.05mA static current, allowing it to stay on standby for up to 2 years after a full charge.
Clean the exterior with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.

Image illustrating low power consumption and 2 years of battery life for the jump starter — Figure 9: The jump starter's low consumption design ensures a long standby time.

6. Troubleshooting

6.1 Vehicle Not Starting

Check Connections: Ensure the intelligent ignition clamps are securely and correctly attached to the car battery terminals (red to positive, black to negative).
Battery Level: Verify that the jump starter has sufficient charge (check the digital display).
Zero Voltage Start: The device is capable of jumpstarting vehicles even from zero voltage, providing a 2000A peak current and 1000A starting current.

Image highlighting 2000A peak current and 1000A starting current for zero voltage jumpstart — Figure 10: The jump starter provides powerful current for instant starting, even from zero voltage.

6.2 Operating in Extreme Temperatures

The jump starter is designed to operate reliably in a wide range of temperatures, from -20°C to 60°C. A built-in temperature protection chip and resistor ensure stable performance in varying environmental conditions.

Image showing the jump starter's resistance to low and high temperatures (-40-0°C and 60°C) — Figure 11: The device maintains performance in extreme cold (-20°C) and heat (up to 60°C).

7. Specifications

Feature	Specification
Brand	Baseus
Product Name	Baseus Super Energy Max Car Jump Starter
Model	CRJS04 (CGNL020001)
Capacity	20000mAh / 3.7V / 74Wh
Rated Output Capacity	13000mAh
Input	5V/2A, 9V/2A (Max)
Output 1 (Fast Charging)	5V/3A, 9V/3A, 12V/2.5A (Max)
Output 2 (Standard Charging)	5V/2.4A (Max)
Total Output	42W (Max)
Starting Voltage	12V
Starting Current	1000A
Peak Current	2000A
Suitable For	12V up to 8.0L gasoline engines and up to 4.0L diesel engines
Operating Temperature	-20°C to 60°C
Battery Type	Lithium Polymer
Safety Features	8 safety protections, intelligent detection, OD anti-reverse connection
Flight Safety	44.4Wh rated power conforms to civil aviation standards

Product parameters table with dimensions and specifications — Figure 12: Detailed product parameters and dimensions.

Image showing various vehicle types supported by the jump starter, including sedans, off-road vehicles, recreational vehicles, small trucks, motorcycles, commercial vehicles, passenger cars, and SUVs. — Figure 13: The jump starter supports 12V/8.0L gasoline and 12V/4.0L diesel vehicles, covering a wide range of vehicle types.

Image stating 'Charge Once for 60 Times of Jumpstart' with details about 20000mAh lithium polymer batteries — Figure 14: The 20000mAh lithium polymer battery allows for approximately 60 jumpstarts on a single charge.

Jump starter and phone on an airplane tray table, indicating flight safety — Figure 15: The 44.4Wh rated power conforms to civil aviation standards, making it safe for air travel.

8. Warranty and Support

This product is designed for durability and long-term performance. While specific warranty details were not provided, the device is built with high-quality components, including a lithium polymer battery designed for approximately 2 years of standby life with proper maintenance.

For technical support or inquiries, please refer to the seller's contact information or the official Baseus website.

9. User Tips

Always ensure the jump starter is adequately charged before embarking on a long trip.
Familiarize yourself with the positive (+) and negative (-) terminals of your car battery before an emergency arises.
In cold weather, keep the jump starter in a warmer environment (e.g., inside the car cabin) until needed to ensure optimal performance.
After jumpstarting, disconnect the clamps from the car battery immediately to prevent damage.
The flashlight feature can be a lifesaver at night; practice using its different modes.

	Baseus Super Energy Max Car Jump Starter CGNL020001 - User Manual Comprehensive user manual for the Baseus Super Energy Max Car Jump Starter (Model CGNL020001), featuring 20000mAh capacity and 2000A peak current. Includes specifications, usage instructions, safety precautions, and environmental information.
	Baseus Super Energy Air BS-CH001 Car Jump Starter User Manual and Safety Guide This document provides comprehensive instructions and safety guidelines for the Baseus Super Energy Air BS-CH001 car jump starter. It details product specifications, package contents, schematic diagrams, usage procedures, and important safety precautions for operating the device.
	Baseus Super Energy 4-in-1 Car Jump Starter & Tire Inflator BS-CH013 User Manual Comprehensive user manual for the Baseus Super Energy Series 4-in-1 car jump starter and tire inflator (Model BS-CH013). Learn about product specifications, features, how to start a car, inflate tires, charge devices, and important safety precautions.
	Baseus Super Energy Air BS-CH001 Car Jump Starter User Manual Comprehensive user manual for the Baseus Super Energy Air series car jump starter (Model BS-CH001), covering safety instructions, product parameters, package contents, operating steps, and flashlight function.
	Baseus Super Energy Series 4-in-1 Car Jump Starter BS-CH013 User Manual User manual for the Baseus Super Energy Series 4-in-1 Car Jump Starter (Model BS-CH013). This device functions as a car jump starter, portable power bank, tire inflator, and emergency light, with specifications, operating instructions, and safety warnings.
	Baseus Super Energy Pro Car Jump Starter: Instrukcja Obsługi i Bezpieczeństwa Szczegółowa instrukcja obsługi i informacje dotyczące bezpieczeństwa dla rozrusznika samochodowego Baseus Super Energy Pro CRJS03. Dowiedz się, jak bezpiecznie używać urządzenia do awaryjnego uruchamiania pojazdów.

Baseus CRJS04