Introduction
Thank you for choosing the Laresar V11 Wall-Mounted Vacuum Charger. This accessory is designed to provide a convenient and organized storage and charging solution for your Laresar V11 cordless vacuum cleaner. By securely mounting your vacuum on the wall, you can free up floor space, eliminate tangled cords, and ensure your vacuum is always charged and ready for use.
This manual provides detailed instructions for the installation, operation, and maintenance of your wall mount. Please read it thoroughly before installation and keep it for future reference.
Package Contents
- Laresar V11 Wall Mount Unit
- Mounting Screws (quantity may vary)
- Wall Anchors (quantity may vary)
Note: The Laresar V11 vacuum cleaner and its charging cable are sold separately and are not included with this wall mount.
Safety Information
- Ensure the mounting surface is strong enough to support the weight of the wall mount and the vacuum cleaner.
- Do not install near heat sources, flammable materials, or in excessively humid environments.
- Use appropriate tools and safety gear during installation.
- Keep out of reach of children.
Setup and Installation
Follow these steps to properly install your Laresar V11 Wall Mount:
- Choose a Location: Select a suitable wall location near a power outlet, ensuring there is enough space to comfortably dock and undock your vacuum. The wall should be sturdy (e.g., a stud or solid masonry).
Image: Front view of the Laresar V11 wall mount, highlighting the screw holes for installation. - Mark Drilling Points: Hold the wall mount against the chosen wall location. Use a pencil to mark the positions of the screw holes. Ensure the mount is level before marking.
- Drill Holes: Using an appropriate drill bit for your wall type (e.g., wood, drywall, masonry), drill pilot holes at the marked positions. If drilling into drywall, insert the provided wall anchors.
- Secure the Mount: Align the wall mount with the drilled holes. Insert the mounting screws through the mount and into the wall/anchors. Tighten the screws firmly until the mount is securely fixed to the wall. Do not overtighten.
Image: Close-up view of the Laresar V11 wall mount, showing the internal structure where the vacuum docks and the charging port connects. - Connect Charger (if applicable): If your vacuum's charger is designed to integrate with the wall mount, route the charging cable through the designated channels and connect it to the charging port on the mount. Plug the charger into a power outlet.
Operating Instructions
Using your Laresar V11 Wall Mount is simple:
- Docking the Vacuum: Gently guide your Laresar V11 cordless vacuum cleaner into the wall mount. The vacuum should click securely into place. Ensure the charging contacts align if the mount is connected to power.
Image: Angled view of the Laresar V11 wall mount, illustrating the slot where the vacuum cleaner is inserted for storage and charging. - Charging: Once docked, if the charger is connected and powered, your vacuum will begin charging automatically. Refer to your vacuum cleaner's manual for charging indicators.
- Undocking the Vacuum: To remove the vacuum, simply pull it upwards and outwards from the wall mount. The click-in design allows for easy one-handed release.
Maintenance
To ensure the longevity and proper function of your wall mount:
- Cleaning: Wipe the surface of the wall mount with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the finish. The stainless steel material is durable and easy to clean.
- Check Security: Periodically check that the mounting screws are tight and the unit is securely fastened to the wall.
- Inspect for Damage: If any part of the wall mount appears damaged, discontinue use and contact customer support.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Vacuum does not charge when docked. |
|
|
| Wall mount feels loose. |
|
|
Specifications
| Feature | Detail |
|---|---|
| Model Number | Laresar V11 |
| Type | Vacuum Cleaner Part (Wall Mount) |
| Material | Stainless steel |
| Dimensions (Approx.) | 10cm (Length) x 10cm (Width) x 10cm (Height) |
| Weight (Approx.) | 0.5 kg |
Warranty and Support
This Laresar V11 Wall Mount is a Certified Original accessory, designed for durability and seamless integration with your Laresar V11 vacuum cleaner. For any questions regarding installation, operation, or if you require technical assistance, please contact Laresar customer support.
Please refer to your original Laresar V11 vacuum cleaner documentation for specific warranty details related to the vacuum itself. Information regarding the wall mount's warranty can be obtained from the seller or manufacturer upon request.
Laresar is committed to your satisfaction and ensures the security and privacy of your personal details. We do not share your personal information with third parties without your consent.
