1. Product Overview
This replacement blade set is designed for VGR professional hair clippers, specifically models V-003, V-640, and V-270. It features a durable DLC (Diamond-Like Carbon) coating and a patented oil reservoir design to ensure smooth cutting performance and effective temperature control.

Figure 1: VGR Super Trim Hair Clipper Blade Set packaging, indicating compatibility with V-003, V-640, and V-270.

Figure 2: Close-up view of the blade components, highlighting the patented oil reservoir design on the back of the fixed blade.
2. Setup and Installation
Before installing the new blade set, ensure your hair clipper is turned off and unplugged from any power source.
- Remove Old Blade: Carefully unscrew the two screws holding the existing blade assembly to the clipper body. Set aside the screws in a safe place.
- Clean Clipper Head: Use a small brush to remove any hair clippings or debris from the clipper head area.
- Install New Blade: Align the new fixed blade (the larger comb-like part) onto the clipper head, ensuring the screw holes match. Then, place the moving blade (the smaller cutting part) into its designated slot.
- Secure Blade: Reinsert the screws and tighten them gently. Do not overtighten, as this can damage the blade or clipper. Ensure the blades are properly aligned and parallel.
- Lubricate: Apply a small drop of clipper oil to the blades. Turn the clipper on for a few seconds to distribute the oil, then wipe off any excess.
3. Operating Instructions
Once installed, the blade set operates as part of your VGR hair clipper. For optimal performance:
- Ensure the blades are clean and lightly oiled before each use.
- The patented oil reservoir design helps keep the cutter head smooth and controls temperature during operation.
- Always use the clipper on clean, dry hair for best results and to prolong blade life.
4. Maintenance
- Cleaning: After each use, turn off and unplug the clipper. Use the provided cleaning brush (or a similar small brush) to remove all hair clippings from the blades.
- Oiling: Regularly apply 1-2 drops of clipper oil to the blades, especially after cleaning or before extended use. Turn the clipper on for a few seconds to distribute the oil evenly. This maintains cutting efficiency and prevents rust.
- Storage: Store the clipper with the blade set attached in a clean, dry place, away from direct sunlight and extreme temperatures. Use the blade guard if available.
5. Troubleshooting
5.1. Blade Pulls Hair or Cuts Poorly
- Check for Debris: Ensure no hair or debris is lodged between the blades. Clean thoroughly.
- Lubrication: Blades may be dry. Apply clipper oil as per maintenance instructions.
- Alignment: Check if the blades are properly aligned and secured. Re-adjust if necessary.
- Dullness: If the blades are old and have been used extensively, they may be dull and require replacement.
5.2. Blade Overheating
- Lubrication: Insufficient oil can cause friction and heat. Ensure blades are well-oiled.
- Cleanliness: Accumulated hair can increase friction. Clean blades thoroughly.
- Continuous Use: Prolonged continuous use can cause blades to heat up. Allow the clipper to cool down periodically.
6. Specifications
| Feature | Detail |
|---|---|
| Product Type | Replacement Hair Clipper Blade Set |
| Brand | VGR |
| Compatible Models | VGR V-003, V-640, V-270 |
| Blade Material | DLC (Diamond-Like Carbon) Coated |
| Special Feature | Patented Oil Reservoir Design |
| Moving Blade Dimensions | Length: 40mm (1.57in), Height: 22mm (0.87in), Base Width: 27mm (1.06in) |
| Fixed Blade Dimensions | Length: 45.5mm (1.79in), Height: 38mm (1.50in), Base Width: 25mm (0.89in) |

Figure 3: Detailed dimensions of the moving blade component.

Figure 4: Detailed dimensions of the fixed blade (comb) component.
7. User Tips
- Optimal Performance: Users report that these blades cut well and do not heat up excessively, thanks to the integrated oil reservoir design. Regular oiling will further enhance this performance.
- Compatibility Check: This blade set is specifically designed for VGR models V-003, V-640, and V-270. It may not be compatible with other VGR models (e.g., V-285) or other brands. Always verify compatibility before purchase and installation.
8. Warranty and Support
For warranty information, please refer to the original purchase documentation or contact your retailer/seller directly. For technical support or further assistance, please contact VGR customer service or your product supplier.
Video 1: Overview of the VGR V-003 Professional Hair Clipper and its accessories. This video provides context for the clipper model this blade set is designed for.