VGR Professional Hair Trimmer, Clipper, and Shaver User Manual

1. Important Safety Information

Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.

• Warning: Keep the device and its cord out of reach of children under 3 years old.
• Keep away from children unless supervised by an adult.
• Do not use this product for purposes other than its intended use.
• Inspect the product before each use; do not use if damaged.
• Follow installation and operation guidelines to avoid injury.
• Do not expose to water or moisture (for electrical products).
• Handle with care to avoid cuts or injuries (for sharp/dangerous items).

2. Package Contents

Your VGR Professional Grooming Kit includes the following items:

• 1 x Hair Clipper (V-003)
• 1 x Hair Trimmer (V-906)
• 1 x Hair Shaver (V-308)
• 6 x Guide Combs for Hair Clipper (1.5mm, 3mm, 4.5mm, 6mm, 9mm, 12mm)
• 3 x Guide Combs for Hair Trimmer (1mm, 2mm, 3mm)
• 1 x USB Charging Cable
• 1 x Cleaning Brush
• 1 x Oil (Note: Due to airline regulations, lubricants may not be included in some packages.)
• 1 x Protection Cap (for shaver)
• 1 x Travel Pouch (for shaver)
• 1 x User Manual (this document)

Image: The VGR Professional Hair Trimmer, Clipper, and Shaver set.

3. Setup and Charging

3.1 Initial Setup

1. Unpack: Carefully remove all protective films and packaging materials from the devices.
2. Inspect: Check each device and accessory for any signs of damage. Do not use if damaged.

3.2 Charging Instructions

Before first use, fully charge each device. Use the provided USB cable and connect it to a certified 5V power adapter (not included).

• V-003 Hair Clipper: Approximately 3 hours for a full charge, providing up to 250 minutes of work time.
• V-906 Hair Trimmer: Approximately 2.5 hours for a full charge, providing up to 240 minutes of work time.
• V-308 Hair Shaver: Approximately 2 hours for a full charge, providing up to 150 minutes of work time.

Image: V-003 Hair Clipper showing 3 hours charge time and 250 minutes work time.

Image: V-308 Hair Shaver showing 2 hours charge time and 150 minutes work time.

4. Operating Instructions

4.1 General Operation

1. Power On/Off: Press and hold the power button for 3 seconds to turn the device on or off.
2. Change Modes/Speeds: For devices with multiple modes or speeds, short press the power button to cycle through the available settings.
3. LED Display: Monitor battery status, motor RPM, and charging indication on the integrated LED display.

4.2 V-003 Hair Clipper

• Adjustable Taper Lever: Use the side taper lever to micro-adjust the cutting length from 0.5mm to 2.5mm for seamless fades and precise detailing.
• Attaching Guide Combs: Select the desired guide comb (1.5mm, 3mm, 4.5mm, 6mm, 9mm, 12mm) and securely attach it to the blade.
• Motor: Features a dual-speed motor with up to 9000 RPM for efficient cutting of all hair types.

Image: V-003 Hair Clipper showing guide comb adjustment and on/off switch with Turbo function.

Image: V-003 Hair Clipper demonstrating 0.5-2.5mm adjustment and various guide comb sizes.

4.3 V-906 Hair Trimmer

• Guide Combs: Use the 1mm, 2mm, or 3mm guide combs for precise trimming and detailing.
• Motor: Equipped with a 9000 RPM motor for powerful and accurate trimming.
• Blades: Features advanced DLC-coated blades for lasting sharpness and reduced friction.

Image: V-906 Hair Trimmer showing 1mm, 2mm, 3mm guide combs and its metal housing.

4.4 V-308 Hair Shaver

• 3-Speed Adjustable Motor: Customize your shave with three precision speed settings (7000-9000 RPM) for sensitive skin or dense beard areas.
• Dual Black Titanium Foil System: Provides a smooth and irritation-free shave with ultra-thin foils.
• Ergonomic Design: The contoured, anti-slip grip ensures comfortable and controlled shaving.

Image: V-308 Hair Shaver highlighting double black titanium foils and LED display.

Image: V-308 Hair Shaver's LED display showing motor speed, battery state, and charging indicator.

5. Maintenance

5.1 Cleaning

Regular cleaning ensures optimal performance and hygiene.

1. After Each Use: Turn off the device. Remove any attached guide combs.
2. Brush Cleaning: Use the provided cleaning brush to remove loose hairs from the blades and the device body.
3. Shaver Cleaning: For the V-308 shaver, the foil head can be easily detached for thorough cleaning.

Image: V-308 Hair Shaver demonstrating easy cleaning by detaching the foil head.

5.2 Lubrication

Apply a small drop of lubricating oil to the blades after every few uses to maintain smooth operation and prolong blade life. (Note: Due to airline regulations, lubricants may not be included in some packages. If not included, use a suitable clipper oil.)

6. Troubleshooting

If you encounter any issues with your VGR grooming device, please refer to the following common solutions:

• Device not turning on: Ensure the device is fully charged. If the battery is low, connect it to the charger.
• Poor cutting performance: Clean the blades thoroughly to remove any hair buildup. Lubricate the blades. Ensure the correct guide comb is attached securely.
• Device overheating: Stop using the device and allow it to cool down. Ensure proper ventilation during use.
• Unusual noise: Clean and lubricate the blades. If the noise persists, contact customer support.

7. Specifications

8. User Tips

• Understand Your Tools: Each device in this VGR set (Clipper, Trimmer, Shaver) is designed for specific grooming tasks. Familiarize yourself with their unique features and recommended uses to achieve the best results.
• Start with Longer Settings: When cutting hair, always start with a longer guide comb and gradually reduce the length until you achieve your desired style. This helps prevent accidental over-cutting.
• Clean Regularly: Consistent cleaning after each use is crucial for maintaining the sharpness of the blades and the longevity of your devices.
• Charge Fully: For optimal performance and battery life, ensure your devices are fully charged before each grooming session.

9. Warranty and Support

All VGR products come with a 12-month warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use.

For warranty claims, technical support, or any questions regarding your VGR grooming devices, please contact the seller or manufacturer directly. Ensure you retain your proof of purchase for warranty validation.

Manufacturer: Ningbo Woji Electric Appliance Co., Ltd., CN-CN-No. 656, Kaifa East Road, Zhouxiang Town, Cixi City, Ningbo, Zhejiang.

EU Authorized Representative: Jorge Wilsone, CASTELLANA 9144, 28046 Madrid.