1. Introduction
This manual provides detailed instructions for the ARISYN Type-C to Type-C Audio Cable (Model: ARS-C-009). This high-quality cable is designed to connect your mobile phone or other compatible devices with a Type-C port to a Digital-to-Analog Converter (DAC) or headphone amplifier, ensuring optimal audio signal transfer. It features high-purity copper wires and durable aluminum alloy connectors for reliable performance.
2. Setup
Follow these steps to properly connect your ARISYN Type-C to Type-C Audio Cable:
- Identify Ports: Locate the Type-C audio output port on your source device (e.g., smartphone, tablet) and the Type-C input port on your DAC or headphone amplifier.
- Connect Source: Insert one end of the ARISYN Type-C cable into the Type-C port of your source device. Ensure a firm connection.
- Connect Destination: Insert the other end of the ARISYN Type-C cable into the Type-C input port of your DAC or headphone amplifier. Ensure a firm connection.
- Verify Connection: Once both ends are securely connected, your devices should recognize the audio connection. You may need to select the external DAC/amplifier as the audio output device in your source device's settings.
Compatibility Note: This cable is specifically designed to support devices such as XUANWU, ONIX ALPHA, and ONIX BETA, among others with compatible Type-C audio interfaces.
3. Operation
The ARISYN Type-C to Type-C Audio Cable operates on a plug-and-play principle. Once correctly connected, the audio signal from your source device will be transmitted digitally to your DAC or headphone amplifier. No additional drivers or software are typically required for basic functionality.
Ensure your source device's volume is set appropriately before playing audio to prevent sudden loud sounds through your headphones or speakers.
4. Maintenance
To ensure the longevity and optimal performance of your ARISYN Type-C to Type-C Audio Cable, please follow these maintenance guidelines:
- Storage: Store the cable in a clean, dry place away from direct sunlight and extreme temperatures. Avoid tightly coiling or bending the cable at sharp angles, which can damage the internal wires.
- Cleaning: Use a soft, dry cloth to gently wipe the cable and connectors. Do not use harsh chemicals, solvents, or abrasive materials, as these can damage the cable's insulation or connector plating.
- Handling: Always grasp the connector housing when plugging or unplugging the cable, rather than pulling on the cable itself. This prevents strain on the connection points.
- Inspection: Periodically inspect the cable for any signs of wear, fraying, or damage to the connectors. If damage is observed, discontinue use to prevent potential issues.
5. Troubleshooting
If you encounter issues with your ARISYN Type-C to Type-C Audio Cable, refer to the following common problems and solutions:
- No Audio Output:
- Ensure both ends of the cable are securely plugged into their respective ports.
- Verify that your source device (phone) is set to output audio through the connected DAC/amplifier. Check your device's audio settings.
- Confirm that the DAC/amplifier is powered on and functioning correctly.
- Test with another compatible cable if available to rule out device issues.
- Intermittent Audio or Static:
- Check for any loose connections at either end of the cable.
- Inspect the cable for visible damage (kinks, cuts, fraying). A damaged cable may cause signal degradation.
- Ensure there is no dust or debris in the Type-C ports of your devices or the cable connectors.
- Device Not Recognized:
- Restart both your source device and the DAC/amplifier.
- Ensure your devices' firmware is up to date.
- Confirm compatibility of your devices with a Type-C audio connection.
6. Specifications
| Feature | Detail |
|---|---|
| Model | ARS-C-009 |
| Item Type | Earphone Cables |
| Cable Length | Approximately 10 cm |
| Cable Material | High-purity copper wires |
| Connectors | Aluminum alloy shell, straight plug, Type-C to Type-C |
| Supported Devices | XUANWU, ONIX ALPHA, ONIX BETA, and other compatible devices |
| Package | Yes |
| Origin | Mainland China |
| Material (Connectors) | Metal |
7. User Tips
No specific user tips were available from reviews or Q&A for this product at this time. For best audio quality, ensure your source audio files are of high resolution and your connected DAC/amplifier is capable of processing them.
8. Warranty and Support
The ARISYN Type-C to Type-C Audio Cable typically comes with a 1-year warranty against manufacturing defects. For warranty claims, technical support, or any product-related inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.
