1. Introduction
The EPEVER EPIPDB-COM-A series is a PWM Dual Battery Solar Controller designed to intelligently manage the charging of two batteries simultaneously from a solar photovoltaic (PV) array. This controller features automatic identification of 12V/24VDC system voltage, offers 10A or 20A rated charge current options, and includes a built-in Bluetooth module for enhanced monitoring and control. It is ideal for RVs, caravans, boats, and other off-grid solar applications requiring dual battery management.


2. Safety Information
WARNING:
- Do not install the controller in humid, salt spray, corrosive, greasy, flammable, explosive, dust accumulative, or other severe environments.
- Ensure all wiring is correct and secure before connecting power.
- Always disconnect power from the solar panel and batteries before installation or maintenance.
CAUTION:
- The EPIPDB-COM series are common-negative controllers. For common-negative systems (e.g., RV systems), it is recommended to use a common-negative controller. Using a common-positive controller with a grounded positive electrode in a common-negative system may damage the controller.
- The grounding terminal on the controller shell must be grounded to shield electromagnetic interference and prevent electric shock.
3. Product Overview and Components
Familiarize yourself with the controller's appearance and connection points:



Key components and their functions:
| Icon/Label | Function |
|---|---|
| Local temp. sensor | Measures ambient temperature. |
| Battery 1 Indicator | Indicates battery #1 charging status and error. |
| Battery 2 Indicator | Indicates battery #2 charging status and error. |
| PV Array Connection | Connects with the solar PV array. |
| Remote Meter Connection | Connects with an optional remote meter. |
| Remote Temp. Sensor (Optional) | Remotely measures battery temperature to regulate charging voltage. |
| LEDs (1st, 2nd, 3rd) | Indicate battery type, charging priority, and charging frequency settings. |
| Button | Used for mode setting and parameter adjustment. |
| Built-in Bluetooth Module | Enables wireless monitoring and control via a compatible app. |
| Dual USB Output | Provides power for charging external devices. |
4. Setup and Installation
Follow these steps for proper installation of your EPIPDB-COM-A solar controller:
- Mounting: Choose a suitable location for the controller, avoiding direct sunlight, high temperatures, and water. Ensure adequate ventilation.
- Wiring Sequence: Connect the components in the following order to prevent damage:
- Connect Battery #1 to the controller terminals.
- Connect Battery #2 to the controller terminals.
- Connect the Solar PV Array to the controller terminals.
- (Optional) Connect the remote temperature sensor to the designated port.
- (Optional) Connect the remote meter to the designated port.
- Grounding: The controller shell must be properly grounded. The negative terminals of the PV array and batteries can be grounded simultaneously, or any negative terminal can be grounded.


5. Operating Instructions
The controller uses three LEDs for mode setting. To adjust settings:
- Press and hold the button for 5 seconds until the number on the LED flashes.
- While the number is flashing, press the button repeatedly to cycle through the available options.
- Release the button on your desired number, and the setting will be saved automatically.
5.1. 1st LED: Battery Type Setting
This LED allows you to select the type of battery connected to the system.
| 1st LED Value | Battery Type |
|---|---|
| 1 | Sealed battery |
| 2 | Gel battery |
| 3 | Flooded battery |
5.2. 2nd LED: Charging Priority Setting
This LED sets the charging current distribution between Battery #1 and Battery #2. The controller will automatically calculate the remaining percentage for Battery #2 based on your setting for Battery #1.
| 2nd LED Value | Battery #1 Charging Percentage | Battery #2 Charging Percentage |
|---|---|---|
| 0 | 0% | 100% |
| 1 | 10% | 90% |
| 2 | 20% | 80% |
| 3 | 30% | 70% |
| 4 | 40% | 60% |
| 5 | 50% | 50% |
| 6 | 60% | 40% |
| 7 | 70% | 30% |
| 8 | 80% | 20% |
| 9 | 90% (pre-set) | 10% |
Note: During normal charging, the controller charges batteries per the set percentage. If one battery is fully charged (e.g., Battery #1), more charge current will be diverted to the other battery (Battery #2). The controller automatically returns to the setting percentage when Battery #1's voltage is low. If only one battery is detected, all charging current will go to that battery.
5.3. 3rd LED: PWM Charging Frequency Setting
This LED allows you to set the PWM charging frequency.
| 3rd LED Value | PWM Charging Frequency |
|---|---|
| 0 | 25Hz (pre-set) |
| 1 | 50Hz |
| 2 | 100Hz |
6. Maintenance
To ensure optimal performance and longevity of your EPIPDB-COM-A controller:
- Regularly inspect all wiring connections for tightness and corrosion.
- Keep the controller clean and free from dust and debris.
- Ensure the heat sink on the back of the controller is not obstructed to allow for proper heat dissipation.
- Check battery terminals for corrosion and clean if necessary.
- Monitor the LED indicators for any abnormal status.
7. Troubleshooting
Refer to the table below for common issues and their solutions:
| No. | LED Status | Troubleshooting |
|---|---|---|
| 1 | LED blinking | Short circuit. Please check whether the PV and battery connection is correct. |
| 2 | LED slowly flashing | Fully charged |
| 3 | LED ON | In charging |
| 4 | LED frequent flashing | No charging or any battery is detected. |
| 5 | LED OFF | No battery or system over voltage. |
8. Technical Specifications
| Parameter | EPIPDB-COM-10 | EPIPDB-COM-20 |
|---|---|---|
| Nominal system voltage | 12/24VDC Auto | |
| Rated charge current | 10A | 20A |
| Battery Type | Sealed; Gel; Flooded | |
| Equalize charging voltage | Sealed: 14.6V; Gel: No; Flooded: 14.8V | |
| Boost charging voltage | Sealed: 14.4V; Gel: 14.2V; Flooded: 14.6V | |
| Float charging voltage | Sealed/Gel/Flooded: 13.8V | |
| Maximum solar voltage | 30V (12V System); 55V (24V System) | |
| Battery voltage range | 8 ~ 15V | |
| Boost time | 120 minutes | |
| Self-consumption | 4mA at night; 10mA at charging | |
| Communication port | 8-PIN RJ-45 | |
| Temp. compensation | -5mV/°C/2V | |
| Terminals | 4mm² | |
| Environment temperature | -35°C ~ +55°C | |
| Net weight | 250g | |
Note: The above parameters are measured in the condition of a 12V system. Please double the values in the 24V system.
8.1. Mechanical Drawing



9. Warranty and Support
For technical support, warranty claims, or further inquiries, please contact EPEVER directly:
- Company: HUIZHOU EPEVER TECHNOLOGY CO., LTD.
- Tel: +86-752-3889706
- E-mail: info@epever.com
- Website: www.epever.com
For a complete and detailed user manual, you can refer to the official PDF document: EPIPDB-COM Series User Manual (PDF)
10. Product Video
Watch this video for a visual overview of the EPEVER EPIPDB-COM-A Dual Battery Solar Controller: