1. Introduction
Thank you for choosing the Roborock A30 Pro Smart Cordless Wet and Dry Vacuum Cleaner. This versatile appliance is designed to provide efficient and thorough cleaning for various surfaces in both household and commercial environments. Featuring powerful suction, advanced steam and hot water cleaning modes, and intelligent self-cleaning functions, the A30 Pro simplifies your cleaning routine. Please read this manual carefully before use to ensure proper operation and maintenance.
2. Product Components
Familiarize yourself with the main components of your Roborock A30 Pro:
- Main Unit (Floor Washer): The primary body housing the motor, dirty water tank, and controls.
- Long Handle Suction: Detachable handle for extended reach and various cleaning tasks.
- Vacuum Floor Brush: Attachment for dry vacuuming.
- Dust Bucket: Collects dry debris during vacuuming.
- Battery: Rechargeable power source.
- Roller Brush: Main cleaning brush for wet and dry cleaning.
- Crevice Brush: For cleaning narrow gaps and corners.
- Bed Brush (Mite Removal): Specialized attachment for upholstery and mite removal.
- Clean Water Tank: Holds fresh water or cleaning solution.
- Dirty Water Tank: Collects dirty water and debris.
- Cleaning Fluid Box: Dispenses cleaning fluid.
- Charging Dock: For charging and self-cleaning.
3. Setup and Assembly
- Unboxing: Carefully remove all components from the packaging. Retain packaging for future storage or transport.
- Assembly:
a. Attach the long handle to the main unit until it clicks into place.
b. Insert the clean water tank and dirty water tank into their respective slots. Ensure they are securely seated.
c. Install the roller brush into the cleaner head. - Charging:
a. Place the main unit on the charging dock.
b. Connect the power adapter to the charging dock and a power outlet.
c. The LED display will indicate charging status. Ensure the unit is fully charged before first use (approx. 80 minutes for 80% charge, 100 minutes for full charge). - Filling Water Tanks:
a. Remove the clean water tank.
b. Fill with clean water, or a suitable cleaning solution if desired, up to the MAX fill line. Do not overfill.
c. Reinsert the clean water tank securely.
4. Operating Instructions
The Roborock A30 Pro offers multiple cleaning modes for various needs.
4.1 Power On/Off
- Press and hold the Power button on the handle to turn the unit On or Off.
- The LED display screen will activate, showing current mode, battery level, and other indicators.
4.2 Cleaning Modes
The A30 Pro features intelligent detection and various cleaning modes:
- Steam Mode: Ideal for deep cleaning and sterilizing stubborn stains. The unit generates 150°C steam to dissolve dirt and kill bacteria.
Figure 4.2: The 150°C steam storm scrubbing feature for dissolving stains and sterilizing. - Hot Water Mode: Uses 86°C high-temperature water for active washing, effective against oil stains and general grime.
Figure 4.3: The 86°C high-temperature active washing feature for refreshing floors and removing oil stains. - Water Absorption Mode: For quickly drying wet surfaces, such as after spills or in humid conditions.
- Dry Vacuum Mode: Use the vacuum floor brush attachment for dry debris and dust.
4.3 Advanced Cleaning Features
- 180° Flat-Lying Cleaning: The cleaner head can lie flat to reach under low furniture without losing suction power or leaking sewage.
Figure 4.4: The unit's ability to lie flat for cleaning under low furniture, maintaining suction and preventing leaks. - Hair-Free Operation (Zero Tangling): The roller brush is designed with a "double shark teeth" structure to prevent hair tangling, ensuring smooth operation.
Figure 4.5: Close-up of the anti-tangle roller brush, designed for hair-free operation. - AI Smart Driving: Provides dual-direction boost for effortless maneuverability.
- Multi-Surface Cleaning: Suitable for various floor types including hard floors, tiles, and sealed wood floors.
4.4 Using Attachments
- Mite Removal: Attach the bed brush for effective mite removal from mattresses and upholstery.
Figure 4.6: Various usage scenarios including vacuuming, mite removal, and long-handle suction. - Crevice Cleaning: Use the crevice brush for tight spaces and edges.
5. Maintenance
Regular maintenance ensures optimal performance and extends the lifespan of your Roborock A30 Pro.
5.1 Self-Cleaning Function
- Place the unit on the charging dock.
- Initiate the 90°C Deep-Penetration Boiling Wash self-cleaning cycle via the controls. This process thoroughly cleans the roller brush and internal pathways.
Figure 5.1: The 90°C high-temperature self-cleaning process on the charging dock.
5.2 Tank Maintenance
- Emptying the Dirty Water Tank: After each wet cleaning session, remove and empty the dirty water tank. Rinse it thoroughly with clean water.
- Refilling the Clean Water Tank: Ensure the clean water tank is filled before each wet cleaning session.
5.3 Roller Brush and Filter Cleaning
- Periodically remove the roller brush and clean any accumulated debris or hair. The anti-tangle design minimizes this, but occasional checks are recommended.
- Remove and clean the filter element regularly to maintain strong suction. Rinse with water and allow to air dry completely before reinserting.
6. Troubleshooting
If you encounter any issues, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not power on | Low battery; Unit not properly assembled | Charge the battery fully; Ensure all components are securely connected. |
| Poor suction power | Dirty filter; Blocked nozzle/hose; Full dirty water tank | Clean or replace the filter; Check and clear any blockages; Empty the dirty water tank. |
| Water leakage | Water tanks not properly installed; Damaged seals | Ensure water tanks are securely seated; Contact customer support if seals are damaged. |
| Roller brush not spinning | Hair/debris tangled; Obstruction | Remove and clean the roller brush; Check for and remove any obstructions. |
| Steam/Hot water not dispensing | Clean water tank empty; Heating element issue | Refill clean water tank; Allow time for heating; Contact customer support if issue persists. |
If the problem persists after trying these solutions, please contact customer support.
7. Specifications
| Feature | Specification |
|---|---|
| Model Number | T50 Ultra (also A30 Pro Steam) |
| Voltage | 110/220V |
| Motor Type | Brushless Motor |
| Power (W) | 450W |
| Suction Power | 22000pa |
| Battery Capacity | 6300mAh |
| Maximum Runtime | >90 minutes |
| Clean Water Tank Capacity | 1000ML (33.81oz) |
| Dirty Water Tank Capacity | 700 mL (23.67oz) |
| Noise Level | ≤50dBA |
| Product Net Weight | 7.5kg (16.53lb) |
| Operating Language | English, Chinese |
| App-Controlled | Yes |
| Certification | CE |
| Cleaning Angle | 180° Flat-Lying |
| Water Temperature (Self-Clean) | 90°C Deep-Penetration Boiling Wash |
| AI Technology | Dual-Direction Boost |
| Sanitization | Bacteria-Killing Cleaning (99.9999% physical sterilization) |
8. User Tips
- For best results with steam or hot water cleaning, ensure the clean water tank is filled with distilled or demineralized water to prevent mineral buildup.
- Always empty the dirty water tank immediately after use to prevent odors and bacterial growth.
- Utilize the 180° flat-lying feature to clean under beds, sofas, and other low-clearance furniture for a comprehensive clean.
Figure 8.1: The low profile of the cleaner head allows it to reach under furniture, demonstrated by its height compared to a mobile phone. - Regularly check the roller brush for any debris, even with the anti-tangle design, to maintain peak performance.
- The LED display provides real-time information; pay attention to battery level and mode indicators for efficient cleaning.
9. Warranty and Support
Your Roborock A30 Pro is covered by a manufacturer's warranty. For detailed warranty information, service requests, or technical support, please refer to the official Roborock website or contact their customer service directly. Keep your proof of purchase for warranty claims.
