Introduction
This manual provides detailed instructions for the QCY H3S Bluetooth Noise Cancelling Headphones. Please read it carefully to ensure proper use and to get the most out of your device.
The QCY H3S headphones feature advanced adaptive noise cancellation up to -56dB, Hi-Res Audio with LDAC support, dual driver units (40mm bass + 13mm tweeter), 360° spatial audio, and an impressive battery life of up to 102 hours (ANC off).
Product Overview Video
This video provides a quick overview of the QCY H3S headphones, showcasing their design, features, and immersive audio experience.
Setup
1. App Download
To enhance your experience with custom touch control, EQ settings, and firmware updates, download the QCY app.
Scan the QR code below with your mobile browser to download the QCY app:

For more languages, please visit https://www.qcy.com/pages/support-center.
2. Pairing
- Power On: Press and hold the multifunctional button for 2 seconds to power on the headset. The headset will automatically enter pairing mode, indicated by the white light turning on for 1 second.
- Connect: On your mobile phone, search for "QCY H3S" in the Bluetooth settings and tap to connect.
Note: The headset will automatically reconnect to the last connected device if available. To make it connectable again for a new pairing, power it off and then press and hold the MFB (multifunctional button) for 4 seconds.

Visual representation of powering on the headset and connecting to a mobile device via Bluetooth.
3. Multipoint Connection
This feature allows the QCY H3S to connect to two devices simultaneously. Note that this feature is not available when LDAC is simultaneously active; it is disabled by default and must be enabled in the QCY App.
- Connect the headset to Device A.
- Turn off Bluetooth on Device A. The headset will automatically enter connectable mode (LED blinks red and white).
- On Device B, search for "QCY H3S" and tap to connect.
- Turn on Bluetooth on Device A again and connect it to the headset.

Illustration of connecting the QCY H3S headphones to two separate devices (Device A and Device B) simultaneously.
4. Factory Reset
To clear pairing records and reset the headphones to factory settings (useful if connection fails):
- Power on the headset.
- Press and hold both the Volume + and Volume - buttons for 10 seconds, or until the LED blinks red 3 times.
- The headset will then automatically enter connectable mode.

Visual guide for performing a factory reset on the QCY H3S headphones by holding the volume buttons.
Operating Instructions
1. Controls
The QCY H3S headphones feature intuitive buttons for easy operation:
| Function | Action |
|---|---|
| Power ON | Hold MFB for 2s |
| Power OFF | Hold MFB for 4s |
| Answer/End Call | Click MFB once |
| Reject Call | Long press MFB for 2s |
| Play/Pause | Click MFB once |
| Next Track | Long press Volume + for 2s |
| Volume Up | Click Volume + once |
| Previous Track | Long press Volume - for 2s |
| Volume Down | Click Volume - once |
| ANC Mode Switch (ANC On/Off/Transparency) | Click ANC button once |
| Adaptive ANC (when ANC is enabled) | Click ANC button twice |
| Music/Game Mode | Click MFB twice |
| Voice Assistant | Click MFB three times |

Detailed diagram showing the location and function of the power, volume, and multi-function buttons on the QCY H3S headphones.

Detailed diagram showing the location and function of the ANC button, and multi-function button for music/game mode and voice assistant on the QCY H3S headphones.
2. Indicator Behavior
The LED indicator on your QCY H3S headphones provides visual feedback on its status:
| Status | LED Indication |
|---|---|
| Low Battery | Red light blinks every 10s |
| During Charging | Red light stays on |
| Fully Charged | White light stays on |
| Pairing Mode | Red and white lights blink alternately |
| Connected | White light blinks every 10s |
| Auto-reconnected | White light flashes fast |

Visual guide to understanding the LED indicator lights for charging status and connection modes.
Maintenance
- If the product is not used for an extended period (more than 2 weeks), please recharge it.
- Do not use oil or other volatile liquids to clean the product.
- Do not disassemble or modify the battery, insert foreign objects, expose it to high temperatures, or immerse it in water or other liquids to prevent battery leakage, overheating, ignition, or explosion. Battery replacement should only be done by the manufacturer.
- Do not drop, crush, or puncture the battery. Prevent external pressure that may lead to internal short circuits and overheating.
- Do not dismantle or modify the product for any reason, as it may result in fire, electronic breakdown, or permanent damage to the product.
- Do not expose the product to extremely low or high temperatures (below 0°C or above 45°C).
Troubleshooting
- Q: Why can't headphone pair with my mobile phone?
- A: Please check if your headphone is in pairing mode or re-connection mode. Ensure the Bluetooth search function of your mobile device is turned on. If all these are confirmed, go to the Bluetooth menu of your mobile device, delete/ignore the earphone's Bluetooth pairing name, and then try to reconnect according to the pairing steps.
- Q: Why is the connection not stable and cuts out intermittently?
- A: Please check if there are any metal materials or obstacles within a relatively close range or in your surroundings that might interfere with the Bluetooth connection. Bluetooth is a radio technology sensitive to objects between the headphone and other devices.
- A: If there are a lot of Wi-Fi, 5G, and 4G signals, or high-power electrical appliances nearby, it may cause stuck and intermittent sound. Changing the environment or re-pairing can solve the problem.
- Q: Can I replace the battery in the headphone?
- A: No, you cannot. The headphone uses a built-in non-detachable Li-Polymer battery that cannot be replaced.
- Q: Why do I experience a delay in video watching or game playing?
- A: Affected by factors such as environment, network, and mobile phone codec, there will be varying degrees of delay when the mobile phone transmits audio data to the headphone.
- Q: Why can't my headphone turn on?
- A: Please recharge it and make sure it has enough battery power. If it is fully charged and still nothing happens or if you are not able to charge the unit, please contact customer support for warranty cover.
- Q: How to solve the problem that there is no sound when listening to music or calling?
- A: On Android phones, there is a settings icon on the right side of the Bluetooth connection name. Click to enter, turn off the mobile phone audio and media audio, and then turn them on again. If there is still no sound, please re-pair the earphones with the mobile phone.
- Q: How do I update the version of my headphones?
- A: In the QCY Application, navigate to: Device > Settings > Firmware Upgrade. If it prompts that the upgrade cannot be made, it indicates that it is already the latest version.
- Q: The headphones can't connect to the APP?
- A: You can set the language of the application to English before connecting the headphones.
Specifications
| Feature | Detail |
|---|---|
| Product Name | QCY H3S |
| Material | ABS |
| Weight | 240g |
| Battery Capacity | 750mAh |
| Battery Life (ANC off) | Up to 102 hours |
| Battery Life (ANC on) | 58 hours |
| Voice Assistant Built-in | Yes |
| Maximum Wireless Range | 10m-20m |
| Sound Isolating | Yes |
| Earcups Type | Sealed |
| Charging Method | Cable (Type-C) |
| Headphone Pads Material | Fabric (Soft Protein Leather) |
| Driver Units | 40mm Bass Driver + 13mm Tweeter |
| Bluetooth Version | 6.0 |
| Package Contents | User Manual, Charging Cable |
| Features | Active Noise Cancelling, Dual Connection, 360° Spatial Audio, Foldable Design |
| Audio Codecs | SBC, LDAC |
| Wireless Connectivity | Yes |
| App Support | Yes |
| Waterproof Rating | IPX5 |
| Frequency Response Range | 20 - 40000Hz |
| Active Noise-Cancellation | Yes (Adaptive ANC up to -56dB) |
| Volume Control | Yes |
| Control Button | Yes |
| Wireless Type | Bluetooth |
| Connectors | Type-C |
| Communication | Wireless |
| Style | Over-Ear Headphones |
| Certification | CE, FCC, RoHS, BQB |
| Compatible Systems | iOS / Android |
| Bluetooth Range | 10m |
| Charging Port | Type-C |
| Noise Cancellation Modes | Adaptive / Commute / Crowded / Indoor / Anti-Wind |
| Call Microphones | 7 Mics with AI for clear calls |
| Call Noise Reduction | DNN Clear Call Noise Reduction |
| Transparency Mode | Upgraded Transparency Mode |
| Spatial Sound | 360° Spatial Audio Experience |
| Latency | 60ms Ultra-Low Latency |
| EQ Settings | 7 EQ Presets + Custom EQ via App |
| Sound Modes | Gaming / Music / Movie |
| Foldable Design | Portable & Easy to Carry |
| Earcup Material | Soft Protein Leather |

Front view of the QCY H3S headphones highlighting Hi-Res Audio and LDAC certifications.

White QCY H3S headphones with a summary of key features: -56dB Adaptive ANC, Hi-Res with LDAC Codec, Bluetooth 6.0, Dual Driver Units, 102hrs Playtime.

Image illustrating the battery life of QCY H3S headphones: 102 hours with ANC off and 58 hours with ANC on, with a quick charge of 10 minutes for 7 hours of play.

Image showing a person wearing QCY H3S headphones with a visual representation of -56dB Adaptive Noise Cancellation, eliminating 98% max noise.

Image of a person wearing QCY H3S headphones, illustrating the 360° Spatial Sound experience.

Detailed diagram of the QCY H3S dual driver units, showing a 13mm dedicated tweeter and a 40mm precision mid-bass driver, indicating 300% sound quality improvement.

Image of QCY H3S headphones highlighting Unrivaled Hi-Res Sound & LDAC Audio Decoding for studio-quality sound.
What's in the Box
- QCY H3S x 1
- Type-C Charging Cable x 1
- User Manual x 1

Image showing the QCY H3S headphones, Type-C charging cable, and user manual included in the product box.
User Tips
- Ear Pad Comfort: Be aware that the ear pads are dense, which might make them a winter-friendly option. In warmer weather, ears might sweat.
- Sound Quality: Users report good sound quality, comparable to previous models.
- ANC Performance: Noise cancellation is noted as excellent by users.
- Battery Life: The H3S offers significantly improved battery life compared to older models.
- Design Changes: Note that some users found the removal of headband markings and the placement of the ANC button less convenient than previous models.
Warranty & Support
Warranty Period
QCY products come with a 12-month warranty period from the date of delivery.
How to Solve My Problem
For online purchases, please contact the customer service of your purchase channel/platform for after-sales service. QCY support will provide technical assistance. For offline purchases, contact the store/distributor or agent directly.
Valid Proof of Purchase
- Online purchases: Provide order number or information clearly showing the sales channel, product details, price, and sales date.
- Non-official channels: Provide sales store information, order number, or product information evidence confirmed by the QCY service team.
Not Covered under Warranty
The manufacturer's warranty is void under the following circumstances (but not limited to):
- Lost, stolen, or free products.
- Items that have expired their warranty period.
- Products without sufficient proof of purchase.
- Improper or inadequate maintenance or modification.
- Accident, misuse, abuse, contamination, or other external causes.
- The use of unspecified adapter and accessories.
- Malfunctions or damages resulting from natural disasters, earthquakes, lightning, abnormal voltage, or environmental factors.
- Damages that occur as a result of one's failure to follow the instructions.
Contact Details
For FAQs and more information, please email to support@qcymall.com or visit https://www.qcy.com/.
Safety Instructions
- Please carefully read and retain this user manual before using the product.
- If the product is not used for an extended period (more than 2 weeks), please recharge it.
- You must choose a charger produced by a legitimate manufacturer and certified by the national safety authority.
- If your phone cannot detect the product, either re-enter pairing mode or perform a factory reset on the product. If there is a phone program error, close and reopen Bluetooth on the phone or restart the phone.
- Do not disassemble or modify the battery, insert foreign objects, expose it to high temperatures, or immerse it in water or other liquids to prevent battery leakage, overheating, ignition, or explosion. Battery replacement should only be done by the manufacturer.
- Do not drop, crush, or puncture the battery. Prevent external pressure that may lead to internal short circuits and overheating.
- Do not dismantle or modify the product for any reason, as it may result in fire, electronic breakdown, or permanent damage to the product.
- Do not expose the product to extremely low or high temperatures (below 0°C or above 45°C).
- Do not point the product indicator light near the eyes of children or animals.
- Do not use the product during thunderstorms, as it may cause abnormal operation and increase the risk of electric shock.
- Do not use oil or other volatile liquids to clean the product.
- Please do not use this device for long periods of time and at high volume, as there is a risk of hearing damage.
WARNING!
Prolonged exposure to loud noise can cause temporary or permanent hearing damage or hearing loss. As a consequence, avoid listening for long periods at high volume and keep the volume at an appropriate setting.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
IC Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device Cet appareil contient des émetteurs / récepteurs exemptés de licence conformes aux RSS (RSS)d'Innovation, Sciences et Développement économique Canada. Le fonctionnement est soumis aux deux conditions suivantes : (1) Cet appareil ne doit pas causer d'interférences. (2) Cet appareil doit accepter toutes les interférences, y compris celles susceptibles de provoquer un fonctionnement indésirable de l'appareil.
Este equipamento não tem direito à proteção contra interferência prejudicial e não pode causar interferência em sistemas devidamente autorizados.
Manufacturer Information
- Manufacturer: Dongguan Hele Electronics Co., Ltd
- Address: Room 101, Block 1, No.38, Daojiao Daohou Road, Daojiao Town, Dongguan City, Guangdong Province, China
- E-mail: support@qcymall.com
- Website: https://www.qcy.com/
Wireless frequency: 2.402~2.480GHz
RF power of transmission: <6dBm
The power delivered by the charger must be between min 2 Watts required by the radio equipment, and max 5 Watts in order to achieve the maximum charging speed.

This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.