Universal Replacement Remote Control Instruction Manual

1. Product Overview

This universal replacement remote control is designed to operate XtremepowerUS 95034-H3 and BARTON EF-14A wall-mounted electric fireplace heaters. It provides convenient control over various functions of your fireplace heater.

This image displays the front of the remote control, clearly showing the layout of its six function buttons: ON/OFF, °F (temperature), HEAT, DIMMER, COLORFUL, and TIME.

2. Setup

2.1 Battery Installation

1. Locate the battery compartment on the back of the remote control.
2. Slide the battery cover downwards or outwards to open it.
3. Insert two (2) AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment. (Batteries are not included)
4. Replace the battery cover by sliding it back into position until it clicks securely.

This image shows the rear of the remote control with the battery cover detached, revealing the slots for two AAA batteries and their polarity indicators.

3. Operating Instructions

Point the remote control directly at the electric fireplace heater for optimal performance. Ensure there are no obstructions between the remote and the fireplace's IR receiver.

4. Maintenance

• Cleaning: Wipe the remote control with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Battery Replacement: Replace batteries when the remote's range decreases or it stops responding. Always replace both batteries at the same time with new ones of the same type.
• Storage: If the remote will not be used for an extended period, remove the batteries to prevent leakage. Store in a cool, dry place.
• Avoid Damage: Do not drop the remote control or expose it to extreme temperatures, humidity, or direct sunlight.

5. Troubleshooting

• Remote not responding:
  • Check if the batteries are inserted correctly with the correct polarity.
  • Replace old batteries with new AAA batteries.
  • Ensure there is a clear line of sight between the remote control and the fireplace heater's IR receiver.
  • Move closer to the fireplace heater.
• Specific functions not working:
  • Verify that the fireplace heater is powered on and functioning correctly.
  • Some functions may require the heater to be in a specific mode (e.g., heat must be on to adjust temperature).
• Compatibility issues:
  • This remote is specifically designed for XtremepowerUS 95034-H3 and BARTON EF-14A models. If you are using it with a different model, functionality may vary or not work.

6. Specifications

7. User Tips

• For best results, ensure the remote control is always pointed directly at the fireplace unit.
• Keep the remote control away from direct heat sources or extreme cold to prolong its lifespan.
• If you experience intermittent functionality, try replacing the batteries before assuming a fault with the remote or fireplace.

8. Warranty and Support

8.1 Warranty Information

This remote control comes with a 3-month warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims.

8.2 Customer Support

If you have any questions regarding the compatibility or functionality of this remote control, or if your specific device model is not listed, please contact the seller for assistance. Provide a photo and the exact model of your device (old remote) if possible to help confirm suitability.