1. Safety Information
Please read all instructions carefully before installation to ensure safe and efficient operation of your solar charge controller.
- DO NOT disassemble or attempt to repair the controller.
- Install external fast-acting fuse or breaker as required for system protection.
- Disconnect the solar module and fast-acting fuse/breakers near the battery before installing or moving the controller.
- Ensure power connections remain tight to avoid excessive heating from loose connections.
- Only batteries that comply with the controller's parameters can be charged.
- Battery connection may be wired to a single battery or a bank of batteries.
- Be aware of the risk of electric shock; the PV and load may produce high voltages when the controller is running.
- Do not install this product in humid, salt spray, corrosion, greasy, flammable, explosive, dust accumulative, or other severe environments.
2. Product Overview and Features
The EPEVER Tracer BP solar charge controller utilizes advanced Maximum Power Point Tracking (MPPT) technology to optimize charging efficiency and reduce system costs. It supports various battery types including sealed, gel, flooded, and lithium batteries. Users can monitor and modify operational status and parameters via mobile app or PC software. This controller is suitable for a wide range of solar applications.
Key Features:
- High-quality components (ST, IR, Infineon) for extended lifespan.
- Wide operating environment temperature range.
- Compatibility with lead-acid and lithium batteries.
- Lithium battery self-activating and low-temperature protection.
- Maximum conversion efficiency of 98%.
- MPPT tracking efficiency of no less than 99%.
- Ultra-fast tracking speed and guaranteed tracking efficiency.
- Accurate recognition and tracking of multiple power points.
- PV power limitation function.
- Monitoring and parameter setting via Mobile APP and PC software.
- Standard Modbus communication protocol for RS485 bus connections.
- IoT module and Cloud Server monitoring for remote management.
- RS485 connector provides power supply.
- Aluminum housing for enhanced cooling.
- Real-time energy statistics function.
- IP68 waterproof degree.
Video: EPEVER MPPT Solar Charge Controller Product Overview

Figure 1: EPEVER Tracer-BP Series MPPT Solar Charge Controller (10-30A, IP68)

Figure 2: High Efficiency of the Controller (Max. conversion efficiency ≤98%, Tracking efficiency ≥99%)
3. Setup and Installation
Connection Sequence:
- Connect components to the controller in the following sequence: Battery → Load → PV.
- Pay close attention to the correct polarity (