1. Introduction
The LEKATO MS-20 Wireless In-Ear Monitor System is designed for live performers, singers, and bands, providing low-latency, high-fidelity audio monitoring. This system features a 2.4G wireless connection, auto-pairing functionality, and OTG support for seamless integration with various audio sources. Its compact design and robust features ensure clear, reliable monitoring for diverse stage and studio environments.

2. Safety & Warnings
Please read all instructions carefully before using this product to ensure safety and prevent damage.
General Safety Advisory
- Always assume potential hazards are present until proper safety verification is completed.
- Children: Keep the device and its cord out of reach of children under 3 years old. In case of ingestion, seek medical attention immediately.
Essential Precautions
- Do not disassemble or repair this product by yourself.
- Do not use or store it near heat sources, in damp or dusty areas. Avoid violent vibrations or shock.
- Do not drop this product, as it may malfunction.
- Do not use alcohol or other cleaning fluids to clean this product.
- Ensure the transmitter and receiver are kept at a distance from wireless routers or other wireless equipment during use to prevent interference.
- Obstructions between the transmitter and receiver may affect the transmission distance.
- A maximum of 4 sets of transmitters and receivers can be used in the same place simultaneously. (Note: Product features state up to 10 pairs for 1-N mode, refer to Section 6 for details).
- If only one power indicator is flickering, indicating low battery, please charge the unit promptly. Low battery can affect transmission distance and quality.
- Turn off the transmitter and receiver when not in use.
- Due to the self-discharge characteristic of lithium batteries, charge the battery every 2 months to avoid low battery protection.
- The lithium battery capacity will gradually decrease after repeated charge and discharge, affecting the product's lifespan within an acceptable degree.
- Use only attachments/accessories specified by the manufacturer.
- Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the apparatus. When a cart is used, exercise caution when moving the cart/apparatus combination to avoid injury from tip-over.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug damage, liquid spills, objects falling into the apparatus, exposure to rain or moisture, abnormal operation, or dropping.
- The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection.
- Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
Immediate Action Required
- STOP if you are uncertain about the safety of any action.
- CONSULT relevant official safety manuals or qualified personnel for guidance.
- DO NOT PROCEED without proper authorization and training for hazardous tasks.
- Your safety and the safety of others is paramount. Neglecting warnings can lead to severe injury or fatal accidents.
CE Declaration of Conformity
This product conforms with all applicable European Union regulations. The CE marking confirms that the product meets essential requirements for health, safety, environmental protection, and consumer protection as laid down in EU directives. By affixing the CE marking, the manufacturer declares that the product is in compliance with all legal requirements for CE marking and may be placed on the market throughout the European Economic Area.
3. Product Overview
The Lekato MS-20 system consists of a transmitter and a receiver, along with essential accessories for various connection types.
Package Contents

- 1 x Transmitter
- 1 x Receiver
- 1 x 6.35mm Adapter
- 1 x Type-C to Type-C OTG Cable
- 1 x Type-C to USB A Cable
- 1 x 3.5mm Audio Cable
- 1 x 2-in-1 Type-C Charging Cable
- 1 x User Manual (this document)
Transmitter and Receiver Controls

Transmitter Features:
- 3.5mm Audio Input
- Battery Indicator
- Pair Indicator
- Mono/Stereo Indicator
- Volume Control
- Mono/Stereo Switch (short press)
- Power Button (long press)
- Type-C Charging Port
- Type-C Audio Input (OTG)
Receiver Features:
- 3.5mm Audio Output (Headphones Jack)
- Battery Indicator
- Pair Indicator
- Mono/Stereo Indicator
- Volume Control
- Mono/Stereo Switch (short press)
- Power Button (long press)
- Type-C Charging Port
4. Setup
Initial Pairing
The Lekato MS-20 system features auto-pairing for ease of use. To pair the transmitter and receiver:
- Ensure both the transmitter and receiver are powered on.
- Press the power button of the receiver 3 times quickly. The units should automatically pair.
- A stable connection is indicated by the pair indicator light.
Connecting to Audio Sources and Headphones

Transmitter Connections:
The transmitter is compatible with devices featuring 3.5mm, 6.35mm, Type-C, and USB A jacks. Use the appropriate cables and adapter provided:
- 3.5mm Audio Input: Connect to audio mixers, audio interfaces, laptops, or other devices with a 3.5mm output using the 3.5mm audio cable.
- 6.35mm Input: Use the 3.5mm to 6.35mm adapter with the 3.5mm audio cable for devices with 6.35mm outputs (e.g., some audio mixers, guitar amps).
- Type-C OTG Input: Connect directly to smartphones or tablets with a Type-C port using the Type-C to Type-C OTG cable for direct audio streaming or backing tracks.
- USB A Input: Connect to devices with a USB A port using the Type-C to USB A cable.

Receiver Connections:
The receiver is designed for earphones with 3.5mm and Type-C plugs. Simply plug your earphones into the corresponding jack on the receiver. Note: Earphones are not included with the system.
5. Operation
Mono/Stereo Monitoring
The MS-20 system offers flexible monitoring modes with a one-touch Mono/Stereo switch.

- Stereo Mode: Delivers separate audio to each earpiece for enhanced spatial awareness, ideal for detailed monitoring.
- Mono Mode: Provides identical audio to both earpieces for precise tonal feedback, often preferred for instruments or vocals.
To switch between modes, short press the Mono/Stereo switch button on both the transmitter and receiver.
Volume Control
Adjust the volume using the dedicated volume controls on both the transmitter and receiver to achieve your desired monitoring level.
Usage Scenarios

The Lekato MS-20 is versatile and suitable for:
- Live Performances
- Band Rehearsals
- Recording Studios
- Public Speaking / Speech
6. Multi-Unit Usage
The Lekato MS-20 system supports flexible configurations for multiple users.

- 1-1 Mode: Up to 5 independent sets (each consisting of one transmitter and one receiver) can be used simultaneously in the same area without interference.
- 1-N Mode: One transmitter can send signals to multiple receivers simultaneously, supporting up to 10 pairs. This is ideal for bands with multiple players needing to monitor the same audio source.

7. Charging & Battery Life
The Lekato MS-20 units are equipped with built-in rechargeable lithium batteries.

- Working Time: Over 8 hours of continuous use on a full charge.
- Charging Time: Approximately 2 hours for a full charge.
- Charging Cable: Use the included 2-in-1 Type-C Charging Cable.
- Low Battery Indication: If only one power indicator is flickering, it signifies a low battery. Charge the unit promptly to maintain optimal performance and transmission quality.
- Battery Maintenance: To prevent low battery protection due to self-discharge, charge the battery every 2 months, even if not in use.
- Battery Lifespan: The lithium battery capacity will gradually decrease over time with repeated charge and discharge cycles.
8. Specifications
Key technical specifications for the Lekato MS-20 Wireless In-Ear Monitor System.

| Feature | Specification |
|---|---|
| Brand | LEKATO |
| Model | MS-20 |
| Color | Black |
| Headphones Jack | 3.5 mm Jack |
| Frequency Band | 2.4 GHz |
| Frequency Range | 20Hz–20KHz |
| Sampling Rate | 48KHz/24bit |
| Effective Distance | Up to 100 feet (approx. 30 meters) |
| Battery Life | 8+ hours |
| Charging Time | Approx. 2 hours |
| Material | Composite Materials |
| Batteries Included | No (referring to external batteries, internal rechargeable battery is included) |
| High-concerned chemical | None |
| Origin | Mainland China |
9. Troubleshooting
- No Sound or Intermittent Audio:
- Ensure both transmitter and receiver are powered on and fully charged.
- Verify that the units are properly paired (refer to Section 4).
- Check all audio cables for secure connections.
- Ensure the transmitter and receiver are within the effective distance (up to 100 feet) and have a clear line of sight.
- Minimize obstructions between the units.
- Keep the system away from other 2.4GHz wireless devices (e.g., Wi-Fi routers) to avoid interference.
- Low Audio Quality or Distortion:
- Check battery levels; low battery can affect audio quality.
- Adjust volume levels on both the transmitter and receiver to prevent clipping.
- Ensure the input audio signal to the transmitter is not too high or too low.
- Units Not Powering On:
- Ensure the units are fully charged.
- If stored for a long time, charge for at least 2 hours.
- Difficulty Pairing:
- Ensure both units are powered on.
- Try repeating the pairing process (press receiver power button 3 times quickly).
If you encounter persistent issues that cannot be resolved with the above steps, please refer to the full user manual PDF or contact customer support.
10. User Tips
- Low Latency Advantage: The system offers very short latency, making it highly responsive for live monitoring.
- Frequency Response Consideration: While suitable for many instruments, some users have noted that the low-frequency response might not be ideal for instruments like bass guitar or drums. It may be more suited for vocals or guitar players.
- Starter Set: This system is considered a good value for money, especially as a starter set for musicians doing frequent shows and gigs.
11. Maintenance
- Cleaning: Clean the units only with a dry cloth. Do not use alcohol or other cleaning fluids.
- Storage: Store the product in a cool, dry place, away from heat sources, dampness, and dust.
- Battery Care: As mentioned in Safety & Warnings, charge the battery every 2 months to maintain its health, even when not in use.
- Avoid Physical Damage: Protect the units from violent vibrations, shock, and dropping.
12. Warranty & Support
For detailed warranty information and customer support, please refer to the official product documentation or contact the seller directly.
A comprehensive user manual in PDF format is available for download: