1. Introduction
The NuPhy WH80 HE is a high-performance customized gaming keyboard featuring Hall Effect switches, rapid trigger functionality, and versatile tri-mode connectivity. Designed for precision and responsiveness, it offers a superior gaming and typing experience with extensive customization options.
Figure 1: NuPhy WH80 HE Gaming Keyboard Overview
2. Package Contents
Please check the box for the following items:
- 1x NuPhy WH80 HE Keyboard
- 1x USBC to USBC Data Cable
- 1x USBC to USBA Adapter
- 1x Switch Puller
- 2x Magenta Toggle Switches
- 1x FAQ Document
- 1x Keyboard Bag
Figure 2: Contents of the NuPhy WH80 HE Keyboard Package
3. Setup
3.1. Charging the Keyboard
The WH80 HE keyboard is equipped with an 8000mAh battery, providing up to 500 hours of battery life under laboratory conditions (all lights off). Before initial use, it is recommended to fully charge the keyboard using the provided USB-C cable.
Figure 3: NuPhy WH80 HE Battery Life
3.2. Connecting the Keyboard
The NuPhy WH80 HE supports tri-mode connectivity: 2.4G wireless, Bluetooth (BT), and wired (CBL) via USB-C. Use the toggle switch located on the keyboard to select your desired connection mode.
Figure 4: Tri-mode Connection Toggle Switch
- 2.4G Wireless: Plug the 2.4G receiver into an available USB port on your computer. Switch the keyboard toggle to '2.4G'. The keyboard should connect automatically.
- Bluetooth: Switch the keyboard toggle to 'BT'. On your device, search for Bluetooth devices and select 'NuPhy WH80 HE' to pair.
- Wired (CBL): Connect the keyboard to your computer using the provided USB-C to USB-C cable (or USB-C to USB-A with the adapter). Switch the keyboard toggle to 'CBL'.
3.3. Software Installation (NuPhyIO 2.0)
For advanced customization of key bindings, macros, lighting effects, and other settings, download and install the NuPhyIO 2.0 web-based driver from nuphyio.com. This software allows for fine-tuning of the keyboard's features.
Figure 5: NuPhyIO 2.0 Driver Interface
4. Operating Instructions
4.1. Basic Keyboard Functions
The WH80 HE is an 82-key layout keyboard. All standard alphanumeric and function keys operate as expected. Refer to the keycap legends for specific functions.
4.2. Rapid Trigger (RT) Function
The Rapid Trigger function allows you to freely set key reset and re-trigger points with a precision of 0.005mm. This means you do not need a full key lift to stop triggering, enabling faster, more responsive input, especially critical in gaming scenarios. The RT adjustment range is 0.005-2.20mm.
Figure 6: Rapid Trigger Mechanism
4.3. Advanced Gaming Functions
The keyboard supports several advanced functions for competitive gaming:
- Rapid Shift Function: Determine which key to trigger by comparing the travel distance of two set keys.
- DKS (Dynamic Keystroke): Allows for dynamic adjustment of keystroke behavior.
- ST (Snap Tap): Provides quick, responsive key actuation.
- SOCD (Simultaneous Opposite Cardinal Directions): When both bound buttons are pressed, you can prioritize one or cancel both inputs.
- TGL (Toggle Key): Toggles specific functions on or off.
- MT (Mod-Tap): Allows a key to act as a modifier when held and a regular key when tapped.
- HyperTap Function: Add another trigger point at the reset point of RT key travel.
Figure 7: Advanced Key Functions
4.4. Knob Functionality
The integrated knob provides instant adjustment for various settings, such as volume control. Its function can be customized via the NuPhyIO 2.0 software.
Figure 8: Multi-function Knob
4.5. RGB Lighting
The keyboard features dynamic RGB lighting. Lighting effects and brightness can be adjusted directly on the keyboard or through the NuPhyIO 2.0 software.
5. Maintenance
5.1. Cleaning the Keyboard
To clean your keyboard, power it off and disconnect it from your computer. Use a soft, lint-free cloth slightly dampened with water or a mild cleaning solution. Avoid spraying liquids directly onto the keyboard. For cleaning between keycaps, use compressed air or a small brush. The keycaps can be removed for deeper cleaning using the provided switch puller.
5.2. Switch Replacement
The NuPhy WH80 HE features hot-swappable switches. To replace a switch, gently pull off the keycap using the keycap puller. Then, use the switch puller to carefully remove the switch from the PCB. Align the pins of the new switch with the holes on the PCB and press firmly until it clicks into place. Ensure the switch is properly seated to avoid bent pins.
5.3. Battery Care
To prolong battery life, avoid fully discharging the keyboard frequently. If storing the keyboard for an extended period, charge it to approximately 50% and store it in a cool, dry place. Recharge periodically if not in use.
6. Troubleshooting
6.1. Connection Issues
- 2.4G/Bluetooth Disconnection: Ensure the keyboard is charged. Check the toggle switch is in the correct position. For 2.4G, try replugging the receiver. For Bluetooth, re-pair the device.
- Wired Connection Not Detected: Ensure the USB cable is securely connected to both the keyboard and the computer. Try a different USB port or cable.
6.2. Key Responsiveness and Delay
The WH80 HE is designed for ultra-low latency. If you experience unexpected delays or unresponsiveness:
- Check RT Settings: Verify your Rapid Trigger settings in NuPhyIO 2.0. Incorrect settings might lead to unintended behavior.
- Firmware Update: Ensure your keyboard firmware is up to date via NuPhyIO 2.0.
- Interference: For wireless modes, minimize interference from other wireless devices.
Figure 9: Low Latency Performance
6.3. Software Issues (NuPhyIO 2.0)
If the software is not functioning correctly, try restarting your computer and the software. Ensure you have the latest version installed from nuphyio.com. If problems persist, consult the FAQ document or NuPhy's online support resources.
7. Specifications
| Feature | Detail |
|---|---|
| Key Count | 82 keys |
| Weight | 1516g |
| Product Dimensions | 357mm × 114.7mm × 21.7mm |
| Driver | nuphyio.com |
| Return Rate | 8000Hz |
| RT Adjustment Range | 0.005-2.20mm |
| Connection Mode | Tri-mode (2.4G, Bluetooth, Wired) |
| Actuation Travel | 0.1-3.2mm |
| Plate Material | Aluminum alloy |
| Shell Material | ABS |
| Side Panel Material | Aluminum alloy |
| Switch Type | Jade Dragon Switch - Crystal Shine (Hall Effect) |
| Switch Initial Force | 33±5gf |
| Switch Bottom Pressure | 45±10gf |
| Switch Total Travel | 3.2±0.1mm |
| Switch Initial Magnetic Flux | 122±8Gs |
| Switch Lubrication | Factory-lubricated |
| Switch Service Life | 150 million cycles |
| RT Adjustable Precision | 0.005mm |
| Battery Capacity | 8000mAh |
| Battery Life | Up to 500 hours (lights off) |
Figure 10: NuPhy WH80 HE Technical Specifications
Figure 11: Jade Dragon Switch - Crystal Shine Parameters
Figure 12: GASKET Structure for Enhanced Sound and Feel
8. Warranty and Support
The NuPhy WH80 HE keyboard is certified with CE, ensuring compliance with European safety, health, and environmental protection requirements.
Figure 13: Product Certifications (CE, FCC)
For warranty claims, technical support, or further inquiries, please refer to the official NuPhy website or contact your retailer. Keep your proof of purchase for warranty validation.
9. User Tips
- Customize RT: Experiment with different Rapid Trigger actuation and reset points in NuPhyIO 2.0 to find the optimal setting for your gaming style.
- Optimize Battery Life: While the keyboard boasts long battery life, turning off RGB lighting when not needed can further extend usage time between charges.
- Explore Connectivity: Utilize the tri-mode connectivity to seamlessly switch between devices (e.g., wired for desktop gaming, Bluetooth for a tablet, 2.4G for a laptop).
- Leverage Advanced Functions: Take time to understand and configure DKS, SOCD, and other advanced functions in the software to gain a competitive edge.
